# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Perfect fit.
just as described on their web site. Fits the trailer hitch and very satisfied. Only thing I would recommend being purchased with the trailer hitch is instead of the normal pin with carter pin. I would advise purchasing a key locking pin so that no one can steal your draw-tite ball mount and also steal the replacement mount you purchase that slides into the slot when towing anything, People have had there College Logos stolen because they did not have a key locking pin to avoid anyone just walking up undoing the carter pin, pulling the pin and walking away with those and the hitch cover. So if ETRAILER.COM sells the locking pin I would purchase it from them instead of the normal pin.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
very good
Everything was easy to install and came across no real issues. You may want to rethink the 2-1/4" drop for the ball mount in the package. It is much too low for a GMC Terrain. Turning the mount upside down and mounting the ball on it that way seems to provide the correct height.
# 3
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Everything was easy to install and came across no real issues. You may want to rethink the 2-1/4" drop for the ball mount in the package. It is much too low for a GMC Terrain. Turning the mount upside down and mounting the ball on it that way seems to provide the correct height.
very good
# 4
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Perfect fit.
Videos extremely helpful.Product was all and even more than expected. The hitch went on without a HITCH, Sorry, couldn't help it. this is how it turned out. would buy again in a heart beat. Thanks
# 5
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 6
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 7
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 8
Curt Ball Mount for 2" Hitches - 2-1/4" Rise, 3-1/2" Drop - 7,500 lbs - Chrome
Purchased because I wanted something that looked a little better than the standard black ball mount and couldn’t find the size I wanted in aluminum. I used it 3 times last season and put it away for the winter in my garage. It was never on the truck while salt was on the road. Pulled it out the other day and it is a disgusting rusty mess. Attempts to clean off the rust were unsuccessful it was that bad. Total waste of money BTW the picture is post cleaning, it was even worse before
My shipment came in on time and everything that I ordered was shipped correctly. All items were in great condition and not damaged. I am very happy with my order with etrailers. I will not hesitate to let anyone know where to purchase trailing equipment at a great price. Thank you so much for you help. I will install the hitch and all accessories next week and I will take pictures of the final install.
# 9
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Rock Solid and so Smooth I can't give enough praise to this much needed item. I was in a rush to get this during the holidays because my previous mount was thrashed and I was going on a big trip. It shipped the same day at 4pm about an hour after I purchased it and arrived on the 5th day nicely packed and everything I ordered was there. My trip was over 200 miles with about 3,000 lbs on some rugged potholed fire-road bumpy terrain for most of it. I love the "cushion" feature... No more clankity clank - jerkity jerk from the hitch. I'm curious as to it's longevity before the cushion becomes sloppy and I plan on taking it all the way there. I also purchased the stainless interchangeable balls and say this is a must have. The 12" drop is perfect for an 8" lifted truck. This was my first experience with etrailer... And it won't be my last!
this is the second cushioned ball mount I have purchased. I haul a specialty trailer daily for work, stop & go, rough terrain first ball mount I used was just a cheap hollow one witch was turning the pin hole on the truck into an oval. Bought a cushioned ball mount and it lasted 4-6years of towing 3-5days/week before one of the pins holding the cushion in finally corroded in half. I'm sure the pin could have been replaced with some work to compress the rubber again but for the price and longevity of the product I just ordered new and keep on going.
# 10
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Everything was easy to install and came across no real issues. You may want to rethink the 2-1/4" drop for the ball mount in the package. It is much too low for a GMC Terrain. Turning the mount upside down and mounting the ball on it that way seems to provide the correct height.
very good
What our customers are saying:
"Ya have a great web site, but more importantly, I received the items that I ordered, ASAP. Your web site is very, very effective. Thanks so much. Mike"