# 1
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.
Works great on our 2015 Chevy equinox!
# 2
Adapter 4-Pole to 7-Pole and 4-Pole
Exactly what I expected it to be and it was delivered very promptly
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
# 3
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Very easy install. My truck had a precut hole in the bumper for the plug. I then hooked the spare 4 pole plug into a Reese Universal mounting bracket and mounted it onto the hitch.
# 4
Pollak 7 Pole to 4 Way Connector Adapter
I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.
# 5
Adapter 7 Pole to 4 Pole with Tester and Cover
The adapter works great when I need to pull our utility trailer. Having the LED's on the adapter makes it easy to verify the wiring integrity of the tow vehicle if a trailer light is not working.
Love the built in tester
# 6
Hopkins Heavy-Duty Trailer Coiled Wire Adapter for 7-Way to 4-Wire Flat
Useless- how many towed vehicles are within the three foot length of this cable? Do not order this with the wiring kit for your towed vehicle that lets you use the vehicles tail lights instead of the magnetic lights. The tow bar between your motorhome and the "toad" is around 4' long. I'm not sure what this can be used for.
Well made
# 7
Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
As the video indicates, ensure that your vehicle wiring is the same as the 7 blade definitions. Mine was not. Had to determine what color wire connections to use for a 4 flat adapter use on a dolly.
Service from erailer is always quick and efficient. The one time an incorrect product was shipped, the company beat a path to my door to get the right item into my hands. Every experience with them has been 100% positive. Great folks!
# 8
Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
Product is exactly what I want, but should include a dust cover. Also, wire that leads from plug is too long, and the tail light wire is too short. Where they connect should be closer to the plug, because the way it is you can't really unplug it from underneath the vehicle.
Works great , eazy install.
# 9
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
Works very well after re-wiring trailer lights with waterproof distribution box.
2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.
# 10
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round - 12" Long
Worked exactly as I expected. I’m setting up my Jeep to flat tow it behind my camper.
# 11
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
# 12
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
# 13
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 14
Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.
Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.
# 15
Hopkins Endurance 6-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
The stuff not here
Very difficult to make the wiring connections, I was afraid I’d have problems on down the road so, I took it out of circuit and threw it away
# 16
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.
The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.
# 17
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
This trailer plug has everything I wanted. I have a 5 way plug on my boat trailer, I can still use it with a 4 way plug and I will be able to use it with the travel trailer I am planning to buy. I have not yet installed it but I unpacked it and it looks very well made. I have purchased other products from eTrailer and I have not been disappointed with anything's price or quality. Bob
Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.
# 18
Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End
Very easy to install.
Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.
# 19
RoadMaster 6-Wire Trailer Connector - Vehicle End
I ordered and paid for a roadmaster 6 pin connector and was sent a made in China piece of junk. Etrailer has attempted to send the correct connector 2 additional times and have failed! Once sending the bracket I ordered and not the connector and then sending yet another China made piece of junk!!
Installed this on our Chevy Equinox so the battery doesn't get drained while towing it. More convenient than pulling a fuse. Easy install. Highly recommended.
# 20
48" Long 4-Pole Loop with Cover
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
What our customers are saying:
"Very broad selection and outstanding service."