Most Popular Adjustable Ball Mount for 2009 Buick Enclave

Solid, high quality product and easy to use.

Bought to pull my boat with my Yukon and needed a drop hitch to level out the trailer. I wanted to buy a quality hitch, and let me tell you the B&W does not disappoint. Well engineered. It’s it heavy but when installed it is pretty easy to adjust height and ball size. Also supporting an American company is a plus!

Click to Enlarge

Very strong, easy to install and very secure. Yes a bit pricey, but well worth the money. I did notice there was what I thought was an unusual amount of play in the receiver. I called etrailer and Marcia was so very helpful and very concerned that I may have received the wrong product. She even called the manufacturer and found out what the changes that were made by the manufacturer which made the pictures incorrect. My hat is off to Marcia and all the folks at etrailer

Click to Enlarge

Good workmanship. It will be perfect for my trailering. All that I expected save one detail... The hitch has two locks - one for the receiver and one for the adjustable ball assembly. It would be nice if the locks were keyed the same. I always worry about losing my hitch keys. Now I have another key to worry about.

Love the design with no locking through pins to worry about. Only reason for three stars is I received the product with cosmetic damage from being dropped.

Works great. The locking pin feels like it could be a bit wider but otherwise I love it. I’m a novice at towing so the adjustability of the height has helped make sure the towing has been optimized at all times.

Solid, high quality product and easy to use.

I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.

Click to Enlarge

very happy with the product!

Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!

Click to Enlarge

As advertised and quick delivery, I am an Etrailer fan!

Strong and works perfectly!

Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.

This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.

Click to Enlarge

I think overall it is a good product but there are some annoyances. To begin with, this hitch is very heavy. The package weight was 75 pounds, but the main body is at least 50. I can manipulate it, but someone weaker may not be able to. Setting the ball is also a bit tricky with the stopper between the ball mount and the riser. I was able to use my body weight to get the stopper compressed and the pin in, but it was difficult. One suggestion might be to hitch the trailer with the pin out then use the tongue weight of the trailer to get the lower pin lined up. This will not be a good solution for being on the lowest position, but it works for all the others. My other annoyance is it really messes up the back up camera and proximity sensor. Yes, I know I can disable the sensor, but the camera can't be moved which makes hitching alone a bit more annoying. I feel like there is a more elegant design so that there is not a bulge at the top of the riser, but I can't say for sure.

It’s a beast! Installed it n pulled my dump trailer no more rattling jerking nosies etc, wish it was 20lbs lighter my only complaint, The locks could be better I won’t be leaving the hitch installed, the locks are light weight n I believe a hammer will break them off, curt needs to use steel or stainless steel for the locks ( body of locks)

Click to Enlarge

I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.

Click to Enlarge

Click to Enlarge

Solid, high quality product and easy to use.

Was shipped on time.B&W hitch was fine just missing one pin clip.Box had several holes where pin clip could have fallen out. Looks like it had a rough trip.

Click to Enlarge

Sooooo....you sent me a product that was somehow put together backwards and I cannot take them apart somehow the ballhitch is stuck on the male portion backwards and defies gravity and doesn’t need a pin to stay on(becaue thier is no where to put the pin in cause it’s backwards

Click to Enlarge

Have done about 5k with this hitch, just once with a 4500lb camper but mostly with a 3000lb cargo trailer. The former in a highly raised position and the latter in the absolute bottom position. The hitch has worn very well and shows no signs of excess wear, save for the surface of the 2" ball, but it's not concerning. On a Jeep Grand Cherokee with a stock suspension, this seems to give the right balance of range of adjustment without dropping so low in the lower configuration as to scrape through dips, though it can still be done on very sharp dips with the hitch on the lowest setting. Overall, very pleased with it and love that it's lighter than steel and won't rust.