# 1
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 2
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Shipped fast looks good will be putting it on my trailer this weekend.
I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.
# 3
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
I upgraded my leaf springs to 4000lbs springs and needed longer axle U bolts and Quinn at etrailer was helpful getting the correct bolts headed my way.
# 4
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
These did not fit my 3500 lb axle. It has been very difficult determining the correct size U-Bolts for my axle. It appears etrailer does not carry the size I need.
It is exactly as described. It seems solid. I also ordered the springs, and they appear to be solid as well. I look forward to continuing to do business with etrailer due to quality parts AND great customer service from the likes of Shawnee and the crew. Thank you!!!
# 5
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
etrailer has become my source for almost everything for repairing or upgrading our trailer, the replacement of broken leaf springs being the most recent project. If you have questions about the correct part for your project, search the customer service frequently asked questions. There is a lot of helpful information in there that you may not find on other websites. You can also contact customer service if you don't find a useful answer.
Received my two orders and I'm impressed with the quality I see. I am in the process of cutting off the old rusted out fenders so it will be a little while before I can install the new springs and shackle kits. After that I can then install the new fenders and my trailer should be like new. Thank you for the help and prompt service.
# 6
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Bought a used car trailer in need of repair, sand blasted and painted the trailer. While working on it more and more things needed to be replaced. This hanger kit was a great match. Thank you etrailer.
# 7
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
Brackets came not bent enough and bolt nuts are oval shapped and won't thread because of this. Pretty disappointing I will call customer support soon for replacement
Kit is supposed to be for 1-3/4" springs but the center hangers were for 2", they said they would reship but after a week it still hasnt shipped out. Looks like fair quality stuff just packaged wrong in China!
# 8
CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
The u-bolts have stood up pretty well to the elements and strong enough to pull my full 2k pound trailer. So far so good with the zinc protection, hope it lasts as good as other finish options
Fit around axle is good but bolts could stand to be at least an inch longer, only tighten up flush with plate under my 5 leaf springs, could not use lock washers had to use red Loctite.
# 9
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
Did the job
Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks
# 10
Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
Installed slippers Center Point system on out Alpine 3101RL 5ver. The install is straight foreward if your mechanically inclined. Now about the lack of instructions, nothing shipped from Lippert. etrailer provided a link to help with that. I do prefer printed instructions opposed having to scroll through my phone with dirty hands. The torque specs provided by Lippert don't align with normal torque charts for said fasteners. The banana shackles are very thin and unplated,they are just raw steel. For the cost of the suspension Lippert cound do better on the shackles in this kit. Lippert recommends in stalling the air gauge for the air bags outside,however to gauge is a cheap plastic model. I feel it would have a short life span exposed to the elements. The good now, it seems robust and likly to help absorb road shock. I have not had our 5ver on the road yet. But I will leave more feed back when I have. I purchased this suspension system after finding a broken main leaf on our front tandem. I replaced all of our leaf springs bushings and bolts with the wet bolts Supplied in the kit. FYI Lippert neverfail bushings fail in less than 7k miles. We are not over weight.
Just installed the lippert center point and I have to say very impressed on how well it’s built. Super easy to install and I can’t wait to take it down these California roads and see how much better it rides. Installed on a 2022 jayco eagle Ht 29.5 BHDS
# 11
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
The wet shackle kit was purchased for a Neo enclosed snowmobile trailer that worn out shackles and bolts in the suspension. Removal of the old hardware went fine and the clean up of the springs also. The assy of the new shackles and hardware was relatively easy. Initial greasing of the new wet shackle set up was difficult but ultimately I got all zerks to take grease except one of the pins in one of the shackle plates with two pins. A couple of 300 mile trips and all took grease easily except that one pin and it still will not take grease. Its almost as if there is not a hole for the grease to travel thru.
# 12
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
This is exactly what I needed, Perfect fit, Easy installation. Old suspension worn out.
# 13
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"