# 1
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Shipped fast looks good will be putting it on my trailer this weekend.
I bought the spring kit to put on my home built trailer that I put my old heavy slide-in camper on. It more than met my expectations. There was no sway at 75mph or on the 5 mile trail back to camp.
# 2
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
Nice upgrade kit to replace worn parts on a 3 horse tandem axle trailer. Having the beefier shackle straps, bronze bushings, and ability to grease the moving points is a beautiful thing.
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
# 3
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.
# 4
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 5
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear/Center
We installed the kit on a home-built 25' gooseneck trailer that we were converting from 2 axles to 3. This kit, along with new leaf springs on all 3 axles, went on with no issues, and it has been running strong with no problems since the installation. We've put quite a bit of weight on the trailer between logs, lumber, tractors, and equipment, and there have been no issues so far. It was great to have everything we needed, (other than springs), in one kit! And etrailer has always been good about fast delivery, easy purchasing, and great updates on status. Things have gone so smoothly that we have never had to contact Customer Service, so I can't comment on how they do!
I ordered this kit for a trailer that I bought as scrap iron to haul logs so I wouldn't tear up my good trailer. The first load I broke 3 shackles and 2 equalizers. I looked at parts and found this kit at a great price to rebuild my suspension. I had it within 3 days of the time I ordered, And the service was great!! The best part....... when I got the box I thought they knew me personally and had already seen the trailer I was working on, Redneck Trailer Parts LOL. I plan on getting rid of the redneck dually setup with a different set of axles and get rid of the trailer house wheels and make it into a gooseneck. I will for sure get all my parts from Etrailer.com for the rest of this project and any other trailer parts I need. VERY VERY pleased with the parts, service and fast shipping!!
# 6
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
# 7
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
Great customer service and shipping turn around! I needed parts to fix my trailer to get back on the road and it only took 4 days. Can’t thank etrailer.com enough!!
Very nice product
# 8
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
I am sorry but I can not remember names but I talked with two very helpful ladies and could not have been happier with their assistance. Thanks again, the trailer build is going great.
My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!
# 9
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
We did send an email to u requesting a drawing for correct installation of the hanger set. Wasn't sure how to set the springs in regards to the proper measuremnts for distance. We did not receive any respone
I sure do appreciate this company and their team. Parts weren't in stock, but they kept me updated on a consistence bases and that means everything to me as a customer. Great job!
# 10
Triple-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
I would give etrailer 5 stars all suspension parts ,brakes , wheels and tires were delivered without delay this tiny house is a work in progress the only miles I have put on it where to take it down and get it weighed all parts seem to be working fine.
quality products and fast shipping
What our customers are saying:
"Fantastic service, tracing and customer service. Product was as stated and delivered promptly in good condition"