# 1
Titan Forged Pintle Hook Mounting Plate for 2-1/2" Trailer Hitches - 18,000 lbs
The ball/pintle mounting plate worked very well. I was surprised that it stuck out past the bumper so far on my 2008 Silverado 2500HD, but it was only about 4-5 inchest past where my ball usually sits with other hitches. I suppose it will work well as strong as it is to take care of anyone who choses to park to close to me in parking lots! :-)
This mounting plate is very heavy duty, and a tight fit on a 2.5" receiver - no rattling. it is made for 5/8" bolts, not the 1/2" bolts the average 6 ton pintle hitch uses, some washers may be needed for smaller pintle hitches.
# 2
Curt Pintle Hook for 2-1/2" Hitches - 20,000 lbs
Working great I use the fixed straight hitch when I need a little more hitch height or the adjustable hitch depending on which application works better.
So far so good, some signs of wear but thats to be expected considering we are pulling close to GCVW. All and all its been working well.
# 3
Curt Pintle Hook for 2" Hitches - 20,000 lbs
The Curt 20K Pintle hook for my 2" receiver looks and functions wonderfully. Very good finish on the product.
Great hitch for hauling my tractor. The team at etrailer is awesome. Keep up the great work - I love all the pics and videos.
# 4
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
# 5
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
Use this with a curt 16k combination ball/pintle hitch and am very satisfied so far. No drama purchase via Etrailer, and when the torque spec for the hitch — inexplicably — wasn’t included in the literature a call to their friendly team fixed this issue.
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
# 6
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
Great product and the price can’t be beat. Solid steel shank, 1/2” steel mounting surface, and a 1/2” steel brace that runs the entire length of the mounting plate for extra rigidity. This thing is solid.
I needed a longer neck on my pintle. This item is perfect and heavy duty. Quick standard shipping too.
# 7
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
Looking for a heavy duty mount for a pintle hook--this seems to be one of the highest rated mounts I could find. Need to add a rear tow hitch to our Rose Parade float chassis due to new parade rules. Easy to install, but did not come with a pin--need to purchase one separately.
This was my first time ordering with etrailer and I can’t believe how fast I received the products (2days!!) and with free shipping as well . The products are top quality and as described online . The only thing I would add is that I ordered a trailer pintle hitch and a drop mount , and neither one had the bolts to mount the two together nor did I see it offered for sale as a “kit” to be purchased . That would be a nice compliment to add to the package .
# 8
B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
The hitch is made from heavy duty steel. And is a excellent match with the owl equipment trailer for hauling out tractor That has weight of 8000 pounds.
This is what I needed to match the height of the trailer. The packaging could have bee better because the hitch broke through the box.
# 9
Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
Solid pintle hitch!
I do like the strength of the product. The flaws were the actual bolt on the top piece broke off holding the locking pin first week (allen key bolt). I also have to spray or grease the top piece that opens and closes and the rain rusts the joint quickly and is almost impossible to lift up by hand. I would look to purchase another product here since the price is right, but am not happy with the day to day use of this hitch at all. I do not have a picture at the moment, but if I can, I will show some of the issues. Thanks.
# 10
Tow Ready Pintle Hook for 2" Hitches - 10,000 lbs
Works great and more than anything else, it makes me feel safe that the trailer cannot come loose from my vehicle. Lots of stress lessened when towing. These folks are great to work with and even helped me get one quicker than normal due to some uncontrollable circumstances I found myself in.
Easy lightweight and simple to use! The only issue I’ve had is the chain has come off the locking pin a couple of times, I think I’m going to get a locking pin to replace this one. I deliver motorhomes professionally and this has helped my pre and post trip times a lot, plus it’s so much easier to remove this and throw it in my vehicle when it’s raining than having to wrestle a whole hitch mounted towbar.
# 11
B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
The shipping department don't listen I requested the hitch plate to be wrapped in bubble wrap the second time and it looks just like the first one. We are using it on our 1988 1st work truck that we had restored so we want a new hitch for the truck but there package sucks so tge paint gets marked up in shipping and looks bad. I will not be ordering again from etrailer
Works great to replace my 2 inch unit for my Silverado 2500HD
# 12
B&W Tow & Stow Pintle Hook - 2-5/16" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
I like the hitch but it is NOT usable for A pintle hitch. The bottom plate where the ring rides in the hitch is flat and very slick and the ring slams around when you turn, stop, and start off. This is VERRY DANGEROUS as it could snap the ball off. If the bottom plate had A place for the ring to lay in it would solve Your Problem. I would like to hear from you Thanks!
As a contractor, I have been extremely impressed with how this pintle hitch has worked over the last year. All is good! Thanks!
# 13
B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
Very nice product still working fine
Part is well built and gives me the adjustability I needed for multiple applications for my hitches. The wheel had the correct offset I needed to fit my trailer correctly, and the breakaway kit was a great replacement for the one that was broken on the used trailer I just purchased. The universal trailer brake installation kit was just what I was looking for. Great quality and the ability to run either type of trailer wiring harness in one hookup. Great parts and great service!!!
# 14
Curt Pintle Hook for 2" Hitches - 10,000 lbs
I purchased a new Curt Pintle Hook Hitch to tow a small material trailer to construction sites. I am pleased with the hitch and it's ease of operation.
Can not be beaten for the price. Have never found a load too great for it. My truck is the only limit!
# 15
Pintle Hook Mounting Plate for 2" Hitches - 7-5/8" Shank - 8 Hole - 12,000 lbs
Bought this for my 2014 Jeep Rubicon to tow an M416 military trailer. The hitch gave me the exact platform I needed to clear the spare tire (with 1" of vertical space to spare) . . . and keep my trailer level. Also added the Curt Pintle Hook - Bolt On - 10,000 lbs - C48205 and again, the hitch allows the top of the pintle (when closed) to clear the tire. Both items I bought came expertly packaged in a stout box, quickly and with free shipping. etrailer rocked it!
Patrick, I would like to thank your team once again for recieving the adjustable hitch earlier than expected. She will be working on a 1997 Dodge Ram 2500 cummins. What a thing of beauty? paired with the pintle combo. The packaging was excellent for the given weight of pintle combo, adjustable solid hitch and Bulldog stainless hitch lock, great combination. Your staff is second to none. Period. We will be doing buisness in near future again.
# 16
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 10,000 lbs
I was very pleased with better than expected quality of the mounting plate. I have already placed into use on my 1989 Ford F350 truck!
Excellent customer service! Fast & Affordable. Thank you. Mike
# 17
B&W Tow & Stow Pintle Hook with 2" Ball - 2-1/2" Hitches - 10,000 lbs/16,000 lbs
Sale representative Nicole B provided me with impeccable service. She knew exactly what I needed to tow my boat and trailers. Her expert advise was just what I needed to fully understand that my purchase was right for me. This BW trailer is very heavy duty and versatile. I am extremely happy with my etrailer experience and product I purchased. Thank you.
Works perfectly service was great
# 18
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Fantastic product. Not one complaint.
# 19
Gen-Y Torsion Pintle Hook Mounting Plate for 2-1/2" Hitches - 16 Hole - 21K
# 20
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
Shipped out fast and exactly what I ordered.
Awesome hitch, would pull the frame out from under the truck before this hitch would fail….
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."