See what our Experts say about this Tow Ready Pintle Hitch

• Would a Curt Pintle Hook work with Military Trailer with Lunette Ring Coupler
  If the military trailer you are looking at has a lunette ring coupler for attaching to a pintle the part # C48205 would do a great job as long as the total weight of the trailer loaded was less than 10k. Let's say you need more capacity than that though, the part # C48215 has a 30k capacity. For a mount that would fit in a trailer hitch you would want the part # 63057.
  view full answer...
• Dimensions Of Tow Ready Pintle Hook # C48205
  We don't have a 3D model available, but I'd be happy to give you some measurements of the Curt Pintle Hook, Bolt-On, 10K # C48205. The most notable measurements are the mounting holes. They are 3-3/8 inch center on center measuring horizontally and 1-3/4 inch center on center when measured vertically. This is a standard size to match with a mounting plate/shank like # 63057. The internal measurement is 1-3/4 inches in diameter and makes almost a complete circle. The outside dimension...
  view full answer...
  
• Can the Pintle Hook Mount part # 63057 Be Used in Rise and Drop Position
  Yes, you can use the Pintle Hook Mount part # 63057 in the rise or drop position. For a pintle hook and ball combo with a 2-5/16 inch ball you would want the part # C48200.
  view full answer...
• Pintle Hook Recommendation with 30k Capacity
  For a pintle hook with a 30k capacity that is designed to bolt on to a mounting plate like the part # 63057 we have the part # C48215 which would work well. You didn't say how you would attach the hook but this would work well.
  view full answer...
• Will a Pintle Hitch Fit Weld-On Nose Plate 337TNP716625750
  Plate # 337TNP716625750 is going to be larger than what pintle hook # C48210 requires. The pintle hook is usually on the vehicle side so the mounts for it all have regular shanks that fit a hitch receiver. You want something like part # 63057. The nose plate would be used on the trailer side to attach a lunette ring such as # C48550. The bolt holes are 4-1/2 inches apart.
  view full answer...
• Availability of 5 Ton Pintle Hook Ball Mount
  We do have a bolt on Pintle Hook with a 10K capacity. Check out part # C48205. You may also need a mount to attach the pintle hook to so use it in a 2-inch trailer hitch receiver. You can use # 63057. And for hardware you can use # 43076. I have included a video review of this part for you to check out. The prices are available on the product page.
  view full answer...
• What Capacity Pintle Hook is Needed for a 4,000 Pound Trailer
  If the gross trailer weight is 4,000 pounds (2 tons) you would need a pintle rated greater than 4,000 pounds. The gross weight would be the total weight of the trailer plus anything loaded on it. Pintle hook # C48205 is rated for 10,000 pounds so it would work just fine. You would also need a mount to attach the pintle hook to so use it in a 2-inch trailer hitch receiver. You can use # 63057. And for hardware you can use # 43076.
  view full answer...
• Operation Details of The Draw-Tite Pintle Hook Combo # C48200
  The Pintle Hook Combo # C48200 can be used for trailers that have a pintle hook setup that use a lunette ring, or for trailers that have a coupler and attach to a hitch ball. You cannot use the pintle to lock or secure the trailer to the hitch ball. To use the hitch ball, your trailer would need to have a 2-5/16 inch coupler to secure to the hitch ball. If you have a 2-1/2 inch hitch receiver, you will need to use Pintle Hook Mounting Plate, part # RP45294. If you have a 2 inch receiver,...
  view full answer...
• Will The 10K Bolt On Pintle Hook # C48205 Work On 3/4 Ton Military Trailer
  On your 3/4 ton military trailer the weight capacity should not be a problem with this Pintle Hook, you would just need to measure where you are going to mount this to see if it will fit. The Pintle Hook, Bolt-On, 10K, # C48205, can be bolted to a reinforced bumper or a pintle hitch mount. The mounting holes on the pintle hook are 3-1/2 inches wide from center to center and 1-3/4 inches up/down from center to center. The mounting hole diameter is 9/16 inches. If you are going to attach...
  view full answer...
• What is the Pintle Hook Combo # 63010 Designed to Attach To
  The Pintle Hook Combo # C48200 that you referenced is designed to attach to a hitch mounting plate like the part # RP45294 that fits a 2-1/2 inch hitch or part # 63057 for if you have a 2 inch hitch. The hole spacing of the plates it is supposed to attach to are 3-3/8" (Horizontal) x 1-3/4" (Vertical) - center to center with a 9/16 inch diameter.
  view full answer...

Do you have a question about this Pintle Hitch?