It looks like you have the original version of the Prodigy RF, part 902501, which was updated to the newer version of the Prodigy RF TK94FR (also known as part 902502). The replacement controller # TK27FR you're looking at is for the newer model which uses a Bluetooth connection whereas the older version did not.
If you can find a controller for the older model then definitely go for it. Otherwise you'll need to swap out your controller to the newer version, part # TK94FR, or a different... view full answer...
The Reese Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 is meant to be a replacement for and existing 7-way (with factory trailer connector). If your vehicle already has a 7-way on the back, then this is the product to go with.
But if you don't have an existing 7-way, the recommended part is the Universal Installation Kit for Trailer Brake Controller 7-Way RV and 4-Way Flat # ETBC7. If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric... view full answer...
I would need to know the model number or the name of your Extang tarp because there isn't just a single Extang tonneau cover that fits an '02 Ranger, there are many. If you can get back to me with that information I'd be happy to try and find you the correct tarp. view full answer...
If the latch looks like the # 295-000015 I've linked for you, the # 295-000041 you'd looked at would be the correct key.
Without knowing exactly who the manufacturer of the latch is, it would be difficult to say. What I can tell you is that Global Link makes the majority of the door latches you'll come across, so the chances would be very good that the # 295-000041 number 315 key would work for you. If you could provide a photo of the latch, I might be able to positively confirm it for you. view full answer...
We offer replacement brake shoes for 10 x 1-1/2- and 10 x 2-1/4-inch electric drum brakes but no longer for the 1-3/4-inch width you reference. Dexter part # bp04-065 you referenced is a set of replacement brake shoes for electric trailer brakes normally seen on Dexter 2.8K axles. I was not able to find any brake part with the reference number 1530114. It does sound like an update is in order.
If you want to replace your brake assemblies and hubs/drum assemblies you will need to match... view full answer...
The first thing you need to flat tow your 2022 Ford Ranger 4WD is a base plate kit with the part # BLU77XR which is a confirmed fit and very easy to use and install.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.
For lighting... view full answer...
We do!
The parts you're describing for the Demco SBS Stay-IN-Play DUO # SM99251 install on a 2022 Ford Ranger are the following:
- Demco Vacuum Connection Tee Fitting # DM6257
- Replacement Vacuum Check Valve # RM-452142 view full answer...
If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions let me know what they are and I can see if we have anything that is a match. view full answer...
We don't have an adapter, but the good news is that we have a replacement socket that would replace the existing jack. The Optronics # RVC100 will accept the 1/4 male headphone-style jack that will be compatible with the plug you've shown.
If you should ever need to replace the lamp you have, we offer a fan/lamp combo part # 328-001-103 that would work well for you. view full answer...
If you can provide the serial number from the tarp, which is found printed on the underside of the tarp up near the front, I can get the correct replacement tarp from Extang (assuming you have an Extang Platinum tonneau cover). If you'd care to reply with that number, I'd be happy to check with Extang for you. view full answer...
Without more information I cannot say for sure, however it does sound like you have the Extang BlackMax Soft Tonneau Cover EX2630 which is no longer available.
If you have this tonneau cover, then the correct replacement tarp is the:
-Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1630.
This is a snap-on style tarp likeyou mentioned, and is a confirmed fit for your 2004 Ford Ranger with a 6' bed. view full answer...
You can use the Replacement Air Line Kit for Air Lift AirLift 1000 - Rear # AL22007 you asked from or # F2012 to get a new Schrader valve, but it sounds like you just need the valve. I recommend using the Firestone Inflation Valve for 1/4" Tubing # F3032-1 instead to just give you the valve you need. You can simply removed the tube, make a clean cut and then apply the new valve which the line will press onto or into depending on the style chosen above. They are a tight fit so you simply... view full answer...
I was able to use the cover part number you provided, 060308-44630, to confirm with my contact at Extang which replacement parts you need.
For the Cab Clamp use part # EX1034; for the Tailgate Hinge use # EX1033; and for the tarp portion use part # EX43630A. view full answer...
If your old switch was rectangular then Lippert Components Kwikee Large Rectangle Door Switch Kit Item # LC379406 is indeed the correct switch for you. If your switch looks different email me a picture of it and I can determine which is the correct replacement. view full answer...
The Replacement Cover for Extang Classic Platinum Snap On, Roll-up Tonneau Cover - Black # EX6560 you mentioned will not work with your 2008 Ford Ranger as this cover is intended to fit select YMM of GMC/Chevrolet S-10 trucks.
Instead, what you're going to need is the Replacement Tarp for Extang Classic Platinum Roll-up Soft Tonneau Cover - Black # EX6630 which will work with your 2008 Ford Ranger. view full answer...
There is only one version of the canister drains for Pace Edwards tonneau covers part # PE55TJ and it's this version. If there's a way to secure your loads so that they don't shift as much that would be the best solution we can help with. Maybe a cargo net like the part # C18200 would be helpful? view full answer...
If you happened to have the Extang Black Max part # EX2635 installed on your 1993 Ford Ranger (this is only snap on cover we have for your truck), the correct snap on tarp replacement would be the part # EX1635. view full answer...
If your tonneau cover on your 2006 Ranger is the Extang Black Max, part # EX2630 then the replacement tarp you need is part # EX1630.
The replacement snaps you can order are part # EX7028. view full answer...
You will need the Replacement Mounting Hardware # AA82DQ for the Aries Grille Guard # AA3044. This is the specific grille guard which fits your 2000 Ford Ranger. view full answer...
The Westin Diamondstep Replacement Bumper you referenced, part # 66000 includes the bumper only, not the install kit. The bumper plus the install kit is part # 66000-97200.
The bumper is NOT compatible with Ranger Splash Models or vehicles equipped with the OEM hitch.
The install kit includes the mounting brackets and all necessary hardware to attach the brackets to the truck and the bumper to the brackets. If the rear of the truck frame members are still in good shape (not rusted through),... view full answer...
Go To Results