I have the perfect solution for you!
The first thing you need to do is swap out your actuator and for that I recommend using the USA made HydraStar Electric Over Hydraulic Actuator for Drum Brakes # HBA-12 because this company makes very reliable equipment and they receive great reviews from our customers. From my information military trailers like your M105A use larger 1/4" brake lines so you should also need the Fitting # HS43-9035 to make this actuator compatible with your trailer brake... view full answer...
Either hitch pin hole of the B&W Tow and Stow Ball Mount part # BWTS10049B can be used in the hitch of your vehicle. Whichever one works for your towing application best will be perfectly fine. view full answer...
Generally speaking, a radial tire is going to have a few improved differences when compared to a bias tire like what you currently have on your trailer. A radial tire will flex more than a bias tire, giving it better ground contact, traction and stability. They will also run a bit cooler, especially when the tire is under a heavy load. One advantage a bias tire does have over a radial is a stiffer sidewall, a feature that is useful for off road applications.
The 4.80/4.00-8 trailer tires... view full answer...
The Nighthawk tow bar part # RM-676 and the Invisibrake kit part # RM-8700 can be used to flat tow your 2008 Hummer H2 but you will need a new base plate kit which for that you'd want the part # 2506-3 and you'd be set. view full answer...
If you wish to use both a ski/rod carrier and a cargo basket I do have options for you but you'd need a certain type of cargo basket, one that lets you mount crossbars on top so you can then attach the ski/rod carrier. The Yakima OffGrid Roof Cargo Basket part # Y07138 is a great option for this that comes with the accessory bars needed to mount a ski/rod carrier like the Rhino-Rack Ski and Fishing Rod Carrier part # RR572. There's also an extension available, the 18" Extension for Yakima... view full answer...
In order to be able to flat-tow your 2006 Hummer H3, there are 5 items needed.
You will need base plates for the Hummer, a tow bar, safety cables, lighting for the H3, and most states now require a supplemental brake system.
The base plates I recommend are the Roadmaster Base Plates, part # 2505-3. When the front arms are removed the system is virtually invisible.
The tow bar I recommend is the Roadmaster Falcon 2 Tow Bar, part # RM-520. This tow bar has a weight capacity of 6,000 lbs.... view full answer...
Yes, to install a brake controller all you would need is the Tekonsha PowerTrac Brake Controller part # 39523, which is a great economically priced controller and the correct wiring harness part # 20127. Either harness will work fine.
Your 2006 Hummer H3 should have four or five blunt cut wires under the left side of the instrument panel to the left of the steering column. You should see a bundle that contains a red wire with a black stripe, a white wire, light blue wire with a white stripe,... view full answer...
The best way to pick out a transmission cooler to replace the factory one on your 2006 Hummer H3 would be to measure the area in front of your radiator/AC condenser and pick out the biggest cooler that would fit in that area.
The Derale Cooler # D13504 that you referenced would be an excellent choice for a transmission cooler as long as you have the clearance for it. The dimensions of this cooler are 11 inch wide x 12 inch tall x 7/8 inch deep.
I attached an installation video for this... view full answer...
In order to tow your 2006 Hummer H2 using a tow bar, you will first need to install base plates. I recommend base plate kit # 2506-3. I did some research and found that the curb weight of your Hummer H2 is about 6,600 pounds. You will need a tow bar that can handle this much weight and is compatible with the MX style of base plates. I recommend the RoadMaster Blackhawk 2 All Terrain Tow Bar, # RM-422. This tow bar is capable of up to 10,000 pounds.
You will also need safety cables and... view full answer...
For your 2008 Hummer H3, you have a few options for wiring it to be flat towed behind the RV. I have included a link to the options for you. Out of the options, the diode kit, part # RM-154, would be an ideal long term lighting solution.
The wiring plugs into the converter and one set of wires connects to the right side vehicle tail lights and the other wire bundle goes to the left side vehicle tail lights.
The 4-Way end then connects to the RV. You can use an adapter like # PK12716... view full answer...
The Demco Classic Base Plate Kit # DM9518193 referenced in your question is confirmed to fit your 2006 Hummer H3. I spoke with contact at Demco and he stated that this base plate kit is directly compatible with your Blue Ox Avail Tow Bar # BX7420 without the need for any additional adapter piece. The two units will work together perfectly on your Hummer.
I have attached the written installation instructions for the base plate kit that you can also check out. view full answer...
Tire "scrubbing" like what you described does not typically only wear out the insides of a trailer tire.
When trailer tires are worn more on the insides then anywhere else that indicates typically that the axle is being overloaded.
Axles have a natural arch in them that arches up so that when they are under a load they are horizontal and you get even wear on your tires. Overloading your axle would mean that it is arching towards the ground some and would cause that inside wear.
I recommend... view full answer...
I have a solution for you, but since we do not have a pan cooler confirmed to fit your 2008 Hummer H3 and you really don't want to hurt ground clearance your best bet would be to install an additional transmission cooler.
Depending on how much more cooling you need the part # D13503 could work well for you. For most vehicles just one cooler like this provided enough cooling, since you already have a remote fan cooler this should be more than enough when used in combination. view full answer...
I have another option for you, but the CIPA Custom Towing Mirror # CM11401 you were looking at was designed for select Ram trucks, and is not a confirmed fit for your 2006 Hummer H2.
Since there are no custom fit towing mirrors confirmed to fit your H2, I recommend the CIPA Universal Towing Mirrors # 7070-2 if you are looking for a pair of mirrors, or # 7070 if you are wanting a single mirror. I like these mirrors due to the textured rubber straps that hold the mirror secure to your factory... view full answer...
I do have a winch mounting option for a 2007 Hummer H3 but it requires a front mount trailer hitch and hitch mounted winch tray like the Curt Front Mount Trailer Hitch Receiver part # 31270 and Bulldog Winch Receiver Mount Kit part # BDW20155 or you could go with the ComeUp Off-Road Winch w/ Mounting Plate for 2" Hitches part # CU854768. view full answer...
If you are looking to flat tow your 2006 Hummer H3 you are going to need several components that we offer, but a front mount hitch is not designed to be flat towed with.
Instead, you will want a base plate kit like our Roadmaster XL Base Plate Kit # 2505-1. This will provide the attachment point for your vehicle so that it can be towed.
Next, you will need a set of tow bars. I recommend the Roadmaster Sterling Tow Bar # RM-576, this tow bar comes with safety cables, lighting wiring and... view full answer...
Even though the License plate on your 2006 Hummer H3 is on the driver side of your vehicle, the Hopkins Smart Hitch Backup Camera and Hitch Aligner System # HM50002 would still work though you would not be seeing perfectly behind you.
For a system that will allow you to mount the camera directly in the center of your vehicle I recommend taking a look at the # RVS-770613-NM as the camera does not mount to your license plate and can be mounted wherever you need to get the camera lined up... view full answer...
The replacement hub you need is the part # 8-257-5UC3-EZ which is exactly what you have and then for replacement brake assemblies you would want the part # 23-48 and # 23-47. view full answer...
We have exactly what you need to lock the ball mount platform to the shank of your Curt Multi-Ball Adjustable Ball Mount part # D900 and to lock the shank to your hitch.
What you would need is the Trailer Hitch Receiver Lock # e98881. You will need to order a quantity of 3 of these locks and select the keyed alike option before you hit the add to cart button and we will send you out 3 of these locks that will all use the same key.
The part # LPL55CB would also be a great license plate... view full answer...
The most efficient transmission cooler we offer that is a Class IV would be the Derale 16-Row, High-Performance, Stacked-Plate Cooler # D51608. The dimensions of this cooler are 13 inches wide x 6-9/16 inches tall x 2 inches deep. You will need to measure the room you have in front of your radiator, but most likely this would work for you.
You will also need a few adapters. It is hard to say for certain what lines you do have, but you will need a Derale Snap-In Radiator Adapter Fitting... view full answer...
Go To Results