My contact at Thule advised that for the crossbars on your 2014 Jeep Grand Cherokee that have lock core 163 you can use their Replacement Key # THKEYN163. This is sold as a single key so you might want order a few to keep spares on hand. view full answer...
Yes, you can buy just the arms for the Roadmaster Direct-Connect Base Plate Kit part # 1419-8 on your 2003 Jeep Grand Cherokee and for that you will want to use the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. In order to use the above with a Blue Ox Tow Bar you will also need the Blue Ox Tow Bar to Roadmaster EZ5, MS, and MX Base Plates Adapter Brackets part # BX88185. view full answer...
I checked with Yakima and unfortunately they do not offer replacement hinges for their Space Booster line of cargo boxes anymore. This line has been discontinued and you may be able to find used parts on classified ads or personal listings, but they are no longer on the market as replacement parts.
I know this isn't ideal, but the best solution we can provide is a different cargo box entirely. Yakima's new cargo box line is called the SkyBox and they offer a 12 cu ft version, part # Y07334.... view full answer...
The current hub for your Torflex #9 axle uses the inner and outer bearings # L44649 with a grease seal that has a 1.500" inner diameter. You can find the bearing kit as part # BK1-150 on our site.
For a replacement hub we have the part # 8-91-05UC1 for a standard spindle or part # 8-91-05UC1-EZ for E-Z Lube spindles. If you have brakes then you would want part # 8-173-16UC3 for a standard spindle or part # 8-173-16UC3-EZ for E-Z Lube spindles. All of these hub kits come with bearings and... view full answer...
The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 do not come with a new seal. I've attached photos of these mounts as they are often used for replacements or upgrades. The seal or molding is not available as a replacement part according to the manufacturer. view full answer...
You can replace the flange bolts for your Dometic 320 Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic # DOM87FR with the Valterra RV Toilet Floor Gasket with Hold Down Bolts # Q23653VP. This kit will include a new gasket which you can replace your old one with to see if the manufacturer gasket was causing the leaking issue and two new flange bolts to tighten down your toilet and compress the gasket for a tight seal. If you broke the flange then you can replace it... view full answer...
We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you.
You could assemble a solution of parts we offer that would consist of:
• JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D
• Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues
• Bow Roller Bracket, part # CE31005PG
• 3 Inch Bow Roller, part # YR300B-325B view full answer...
It appears you have the Buyers Electric Trailer Jack # 3370093500 based on the design and shape of the override crank. It appears you will need to find one of these used as Buyers does list them available separately. You may be able to use the Crank Assembly # TV0006 with a bit of modification if you are unable to find a replacement. view full answer...
If you have the Aries Grille Guard part # AA1044 then you'll use the Replacement Installation Hardware Kit part # AABRKT-1044 but if you have the Westin Sportsman Grille Guard part # 40-0125 then you'll use the Replacement Hardware Kit part # 40-012PK. view full answer...
If you're referring to the Lippert Quick Drop Tongue Jack part # LC733926, we don't have a replacement set screw or drive for this jack as they are not offered from Lippert as replacement parts. I would suggest you try your luck at a local hardware store as the only option we'd have for you is a new jack. In which case, I recommend switching to the Trailer Valet JXC Trailer Jack part # TV54FR which has the same drill powered option as the other jack but with a better finish and larger footpad. view full answer...
Yes, the 600-800 lb spring bars (Replacement Spring Bar for Husky Center Line Weight Distribution System part # HT32330) will work with the Husky Center Line Weight Distribution System part # HT32218 and they will be much better suited for the weight of your trailer. If you were to use the 800-1,200 lb spring bars you have now you would likely experience a very harsh ride which could then result in more wear on the vehicle/trailer.
The great news is that the other set of spring bars... view full answer...
Trailer breakaway kits are not trailer-specific but a replacement part like the pin and cable does need to match your current breakaway setup.
We have such items for Hopkins, Tekonsha, Curt and others and you'll see them all on the linked page. Just match the pin and cable by brand. Here are popular examples of this replacement part:
Hopkins # HM20051
Tekonsha # 2010-A
Bright Way # 3802350
Curt # C52020
You can also just replace the entire switch with # 3802348 if you prefer. The switches... view full answer...
While we do not offer a square axle we do have the Round Axle # e65GR which will fit your trailer. This has the 89" hub face to hub face and idler hub with 5 on 4-1/2" pattern you are needing. The spring center to spring center is 74" or you can have 2 new Spring Seats # TRSS238 welded on at the correct mounting width for your springs. You will need the U-Bolt Kit # CE23002 to install these axles since they are 2-3/8" round. view full answer...
To adapt the ButtonDown 4 to newer Aero style crossbars like the Jetstreams, you'll need the Universal MightyMounts, part # Y03590. This will replace your ButtonDown's existing snap arounds with a new set of universal clamps that are sized to fit most crossbars.
You'll use your current screw and wing bolt from your ButtonDown 4 to use these clamps. view full answer...
If your vent cover measures 23-3/4" x 6-3/4" then I recommend the RV Refrigerator Roof Vent Cap and Base Black # DMC97FR ( # DMC37FR for white) which is used for multiple Dometic RV refrigerators.
If you have a larger vent cover at 26" long x 7-1/2" wide then I recommend the Camco RV Refrigerator Vent Cover - Top Only # CAM42160 or Camco RV Refrigerator Vent Cover - Black # CAM42163. view full answer...
I'll start this off by saying that grille guards are going to be vehicle specific, so you won't be able to transfer a grille guard from a vehicle that wasn't a 1999 - 2004 Jeep Grand Cherokee. If you've got one off of one of those years, you'll then need to determine which brand of grille guard you've got. It's tough to tell what you've got just by looking at the bracket at the bottom, but if you know it came off of that generation of Grand Cherokee, we've got a couple options for you.... view full answer...
The Curt Trailer Hitch Receiver # 13051 includes the following parts in its hardware kit.
2-.250 x 1.38 x 1.50" ROUND HOLE SPACER
6-M12x1.75,45,CL10.9
6-WASHER,S-CON,1/2,YZ
You can order a Replacement Hardware Kit for Trailer Hitches # RHK for this receiver. You will just need to insert the hitch manufacturer and receiver number in the appropriate fields to ensure you get the exact hardware for your 2001 Jeep Grand Cherokee. view full answer...
To determine if the grill guard you have will fit your 2004 Jeep Grand Cherokee I would have to have the manufacturer information and model number for the guard. It does look similar to the Aries Grille Guard # AA1044 which uses the Replacement Installation Hardware Kit # AABRKT-1044. view full answer...
Go To Results