That looks an awful lot like a Penguin or Dometic RV Air Conditioner. We offer the Replacement Cover # AT3308046006 which appears to be very similar, only white in color. The # AT3308046006 cover is 7" tall, 29" wide and 40-1/2' long. I do suggest measuring your cover to confirm fitment. The only other way to confirm fitment would be to cross reference the model number of your air conditioner. Otherwise measuring will have to do. view full answer...
I checked with my contact at Retrax and they ran your serial number. They confirmed that the F09-2027 will be the correct remote receiver kit for your cover. We have this listed under part # RTX89TR, so it looks like you were on the right track in the first place. view full answer...
According to my research we do have a few options that will work as a replacement for your E333645 LED light:
Cool White
- 180 Lumens/5,500 Kelvin # DI56VR
- 165 Lumens/5,500 Kelvin # DI86VR
Warm White
- 180 Lumens/3,500 Kelvin # DI29VR
- 165 Lumens/3,500 Kelvin # DI76VR
The Lumens rating has to do with how bright the light is while the Kelvin rating is the color of the light itself. The higher the number for each the brighter and whiter the light. view full answer...
The bushing on the Rear Hanger with Bushing # 30-20 has a 9/16" diameter and is 1-3/4" long so you'll need to use one of the bushings in the Dexter Bronze Bushings Kit # K71-291-00 as a replacement. view full answer...
The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the # 8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the # LC66WD, or for self-adjusting brakes # K23-478-479. view full answer...
That remote was unfortunately discontinued earlier this year (2023). Since it was this recent I recommend trying to locate one as opposed to finding a whole new system. You can try reaching out to Air Lift directly or look on a type of buy sell trade to see if someone is getting rid of an old controller.
If you aren't able to find a replacement remote then I recommend replacing your whole system with the Air Lift WirelessAIR Compressor System for Air Helper Springs # AL58WQ which is also... view full answer...
If you're looking for just the L-bracket for your HappiJac Electric Truck Camper Jack System # LC736514-ELKIT then you'll need part # LC182492. The flat bracket can be swapped out with part # LC182494 and the swing brackets can be replaced with part # LC182496. view full answer...
I am not 100% sure what you are asking. The newer models of the power centers/converter sections like the Progressive Dynamics 4500 Series RV Converter # PD4590K18LS8 are coming with the switch that you are referencing that allows you to switch between battery types for charging.
Older models do not have that switch and there are some converter sections that do not have the switch still. Since you have the 90 amp version of the 4500 series, we do not have a replacement converter section... view full answer...
I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR and the Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR. You will want to re-use the hex rods, but you will need to replace the entire roller tube assembly to get the "arms" that are broken on your... view full answer...
For your 58 inch Lippert Edge RV awning the correct replacement idler arm is the part # LC62ED and the correct replacement drive arm (one with the motor) is the part # LC22ED. view full answer...
The correct manual override cover for your 3,500lb electric Ram jack is the Replacement Manual Override Cap for etrailer A-Frame Electric Jack # EJ-3520-BCP.
For a cover you can use the Ultra-Fab Protective Cover for Electric A-Frame Jacks # UF38-944026. This 14-1/2" x 17-1/2" weatherproof cover slips easily over your electric tongue jack and secures with a drawstring to helps to protect your jack motor from the elements. view full answer...
I spoke with my contact at Lippert regarding your older Kwikee step assembly with the 909506000 control module. He stated that in order to replace the control unit all you need is the part # LC379606. This is designed for pre-IMGL step units like yours that were manufactured between 1999 and 2005. You do not need to replace any other components. view full answer...
The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BV0554-01 for white, or # BV0554-03 for smoke.
I have attached a couple of videos for you to check out as well. view full answer...
I do have a solution I can offer you, but the Atwood AT82543 is no longer available. It was discontinued back in 2017.
The closest option we have to replace your Atwood 82543 actuator is part # DM72VR. However, it doesn't have the reverse lockout like your Atwood does. You can add a reverse lockout by adding part # T4748800. This is a reverse lockout and requires your vehicles trailer connector to have a reverse circuit. If your vehicle has only a 4 flat trailer connector, you can use... view full answer...
We do have replacement RV Entry Door Handles like the Global Link # 295-000019 as well as deadbolts like the Valterra # L32CS3108 with 1" throw, but these are keyed separately as we don't have an all-in-one kit with both locks keyed. Alike. You aren't the first person trying to find this solution so I'm hoping one of our manufacturers comes out with an entry door and deadbolt kit keyed alike so you won't need to use 2 separate keys to get into your RV.
Attached is a link to our selection... view full answer...
For your AL-KO T44 axles, the brake assemblies you need are the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K # K23-478-479 or the manual adjust # K23-462-463-00 along with spoon adjuster # W80630.
The grease seal you want is AL-KO part 568861 which is the Grease Seal - Double Lip - ID 1.719" / OD 2.565" # RG06-050 for a set of 2 seals. view full answer...
Yes.
Since you know your 2019 Forest River Wolf Pack 325/13 uses an equalizer that is 5-3/4" long you'll be able to use the MORryde Rubber Equalizers # MR87ZR for an upgrade.
It's a good idea to go ahead and upgrade your shackle straps and bolts at the same time for that you'd need # MR46ZR as well.
I included videos of the products mentioned for you to take a look at. view full answer...
We do have many parts available for your older Thule Flat Top 724 ski carrier. Here is what we carry as replacements:
- Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 (will need # THXADAPT7 if your crossbars are over 30mm tall)
- Replacement Rectangular Washer for Thule Ride-On Adapter # 853-2154
- Replacement Square-Bar Clamp-On for Thule Ride-On Adapter # 853-2156
- Replacement M6 x 50 Carriage Bolt for Thule Carriers # 915-0650-54
- Replacement Thule 2-Wing... view full answer...
Since you have a Furrion Camera system with side cameras the only compatible monitors are going to be the 5" # FR97FR or 7" # FR47FR options. view full answer...
Go To Results