Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual tire, such as # AM10002. This is a load range B tire rated for 590 pounds at 60 psi. I have linked a video review of this tire for you. view full answer...
Your 2016 Isuzu NPR will need a weld-on trailer hitch, and there are a couple of options from Draw-Tite, which is the same manufacturer as Reese hitches. Based on my research, a '16 NPR has a 33-1/2 inch chassis width, so you can choose from either of the following options, with the difference being their bracket height, depending on how much drop you need.
- 7" Tall Brackets: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07
- 16" Tall Brackets: Draw-Tite Ultra Frame... view full answer...
The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver # 3371809055 you were looking at measures 34-1/2" between the sides of the hitch which you can see in the included diagram.
This hitch may fit with your Tommy Lift, but you will need to compare the measurements shown in the diagram to your vehicle with the Timmy Lift to see if you will have enough clearance.
I included a video of the # 3371809055 for you to take a look at. view full answer...
For your 2002 Isuzu NPR HD you're going to need to install a universal trailer hitch like the weld-on Draw-Tite # 41990-07 or perhaps the Buyer's Products # 3371801051 which is also a weld-on application but it has a 62" crossbeam as opposed to the 44" crossbeam for the Draw-Tite.
So basically we don't have a custom fit for your box truck but we do have some universal options available that you can check out. If you still aren't sure then I recommend speaking with whoever you plan on having... view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver, part # 65004, is a front-mount hitch receiver for the Isuzu Hombre. It is not suitable for use on your 2001 Trooper. The required installation hardware and instructions are included with this product when it ships new, but we do offer a replacement hardware kit, part # RHK.
I spoke to my technical contacts at Draw-Tite, Reese and HiddenHitch and confirmed that only rear-mount hitch receivers are available for your vehicle. No front-mount... view full answer...
There are a few options that may fit your 2009 Isuzu NPR with a dump bed, but there are no options that are confirmed to fit.
The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver # 3371809055 is designed to fit trucks with a 34" wide frame and will need to welded and bolted to the frame. This hitch plate has a 17000lb trailer weight rating, and the 2" receiver tube you were looking for.
Another possible option is the # 41990-16 as it has 16" tall brackets, fits... view full answer...
The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It will not fit if the spare tire is located under the vehicle. I have included a link to the installation instructions for you to view.
If you plan on doing some towing I also recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage... view full answer...
Thank you for reaching out!
The suspension enhancement I recommend for your 2021 Isuzu N-Series truck is the SumoSprings Helper Springs which are available as part # SS58DR for the front axle and part # SS38DR for the rear axle.
I really like these because once they are installed you can literally forget about them as they require zero maintenance. These work to not only help level your vehicle, but they are help stabilize it when you're turning.
Attached is a review video for you to... view full answer...
Yes, the Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness item # HS381-9065 will work with the Redarc Tow-Pro Elite Trailer Brake Controller item # RED44FR. The Tow-Pro Elite works with electric over hydraulic brakes. view full answer...
The correct trailer hitch receiver to fit your 2002 Isuzu Trooper is the Curt Trailer Hitch Receiver # C13098. It's a custom hitch designed specifically for your vehicle. The # 75278 you asked about does not fit your Trooper because it's designed for GM mini vans, like the Chevy Uplander, from 1997 to 2009. view full answer...
Flat towing a vehicle requires a few components including a tow bar, safety cables, base plates, a wiring/lighting solution and a braking system for the toad. Often a wiring extension and high/low hitch adapter are also needed. The linked article covers each of these items in detail.
We do offer a base plate for your Trooper, part # 607-16 from Roadmaster. With this I suggest the Tow Ready Adjustable Tow Bar # 63180. Note the bar speed rating is 45-mph and that the Trooper cannot weigh... view full answer...
Yes, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will work with your 1998 Isuzu Trooper. This roof rack is designed for vehicles with a naked roof like what you have. The semi-custom fit may be a little annoying to deal with though and the rack is only rated for 130 lbs so if you want something designed specifically for your vehicle and has a 165 lb weight rating I recommend using the Inno square crossbars roof rack kit:
50" Square Crossbars - # INB127
Feet - # INSUT
Fit... view full answer...
The Class IV Weld-On Ultra Frame Trailer Hitch Receiver by Draw-Tite, Hidden Hitch and Reese, item # 41990, is a weld on application and it is possible that the hitch could work on your vehicle. You would need to measure the width of your vehicle frame and consult a qualified Weldor to determine if the frame on your vehicle is strong enough to weld the hitch to. He will also need to determine if the frame configuration will accept the hitch in the proper orientation for towing.
Along with... view full answer...
The Curt Trailer Hitch Receiver # C13098 is designed to fit a frame 40-7/8" wide. This is the receiver confirmed to fit the 1992-2002 Isuzu Trooper. For your 1991 Isuzu Trooper the Curt Trailer Hitch Receiver # C12181 is the only receiver we have confirmed to fit. view full answer...
If your 2001 Isuzu Rodeo Sport has a factory roof rack then all you'll need to carry a kayak is the Thule Top Deck # TH881. This will carry one kayak and is confirmed to fit the Rodeo's factory rack. If you need to carry more than one kayak use the Thule Stacker # TH830. view full answer...
Yes, the Curt Trailer Hitch Receiver part # C13235 is a confirmed fit for your 2002 Isuzu Rodeo with the door mounted spare tire. This is a Class III trailer hitch with a 2" receiver tube opening.
If you will be towing a trailer you will also need a trailer wiring harness and ball mount/hitch ball if you do not already have them. For a trailer wiring harness I recommend taking a look at the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118360 and for a ball mount... view full answer...
All vehicles built after 1996 should have OBD II instead of the OBD ports, so your 2003 Isuzu N-Series will should almost certainly have an OBD II port. You'll be able to tell the difference because the OBD II has 16 pin holes where the OBD has 12. Your vehicle's owner's manual should also tell you whether or not your vehicle is OBD II compatible, if that is still available.
When it comes to choosing between the two, I really prefer the Edge CTS2 # EP84130 to the Edge CS # EP84030 because... view full answer...
The Draw-Tite Trailer Hitch Receiver, part # 75093, will fit the 1998 to 2004 Isuzu Rodeo that has the under vehicle spare tire, the 2002 to 2003 Isuzu Axiom and the 1998 to 2002 Honda Passport with under vehicle spare tire.
I have linked instructions for the hitch, as well as to an FAQ Article on tips when installing a trailer hitch. view full answer...
You are correct, the URMDH - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren is the same as the # TURMDH Timbren Suspension Enhancement System - Rear Axle.
According to Timbren, this suspension enhancement system is a confirmed fit for all 2021 Isuzu NPR-HD models. view full answer...
Go To Results