I have a solution for you, but the # e99052 is not designed to be used as a standalone carrier; it would need to be used with the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e99049 in order to carry any real weight. This carrier has a capacity of 500-lbs, so it would do well for carrying a generator.
With that said, you may want to instead look at the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs # MNT54FR, which has over... view full answer...
Based on my research, it looks like your 2004 Chrysler Sebring has a towing capacity of 1,000 pounds. I strongly recommend verifying this information by locating the towing section in your copy of the vehicle owner's manual.
If you decide to tow a small motorcycle trailer, I recommend looking at the Curt Class I Receiver Hitch # C11190. This trailer hitch is confirmed to fit your vehicle and will provide a 1-1/4 inch receiver opening. I have included the installation details for you to... view full answer...
To lock the Swagman Trailhead bike rack # S63365 to the trailer hitch you can add lock # S64029. You can also use hitch lock and cable lock combo # S64031 to lock the rack to the hitch and the bikes to the rack. I have linked videos on both locks for you. view full answer...
The Camco Wrench for Screw-In Water Heater Element # CAM09883 is a socket for the 1-1/2 inch nut on water heater elements. You can however use a box end wrench, channel locks, or a plumbers wrench if needed. Often sediment and corrosion can make it difficult to remove an old element so a good connection is important. view full answer...
The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's... view full answer...
We have 2 trailer hitch options available for the 2004 Chrysler Sebring Sedan- a Draw-Tite and a Curt; I recommend using the Curt # C12186 since the powder coating on the Curt hitches is a little bit more durable, so you'll have a hitch that stands up a bit better to some of the rigors of towing. If you're going to be towing with this hitch you'll also need a ball mount, hitch ball and wiring harness to power the trailer lights.
For the wiring harness I recommend using the Tekonsha # 119178KIT... view full answer...
Yes, Thule does list the OutWay 2, # TH45JV, as a fit for your 2004 Chrysler Sebring sedan. I had a chance to use the OutWay series of racks and they are probably the easiest racks to put on/take off. What makes it so easy is because it uses retractable cables instead of straps to secure to the vehicle.
If you will be carrying women's, children's, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, in order to hold the bikes more level. I have included links... view full answer...
We do offer two light-duty Class I trailer hitch receivers for the 2008 Sebring hard-top convertible and both can be seen on the link provided. The hitch # 36448 that you referenced is not a fit for your convertible, only for the sedan version of the Sebring.
The correct Draw-Tite hitch is # 24871. I have linked an installation video for your reference as well as the written instructions.
Please note that according to a Chrysler Corporation document I located online not all versions... view full answer...
There is an option for you, but according to the owners manual for your 2005 Chrysler Sebring you will not be able to flat tow your Sebring. The owners manual states:
"Your vehicle may be towed under the following conditions: The gear selector must be in NEUTRAL, the distance to be towed must not exceed 15 miles (25 km), and the towing speed must not exceed 25 mph (40km/h). If the transaxle is not operative, or if the vehicle is to be towed more than 15 miles (25 km), the vehicle
must... view full answer...
First let's start with a hitch. For that I would recommend the Draw-Tite part # 24871. You will need the recommended ball mount, part # 3594.
For trailer wiring you would want the # 118444, and then for a hitch ball you would want either the # 19256 or # 19258. view full answer...
For a hitch for your 2002 Chrysler Sebring the Draw Tite hitch part # 36301 would work well for you as it has a 300 lb tongue weight capacity. This is a 1-1/4 inch hitch though.
The Curt Cargo Carrier part # C18110 also has a 300 lb tongue weight rating and should work well for you as well. This carrier only weighs 30 lbs as well. I attached videos for both products I mentioned. view full answer...
Yes, I have a few hitch bike racks that will fit your 2000 Chrysler Sebring Convertible. They will attach to a trailer hitch on your vehicle and be able to carry 2 bikes. The maximum number of bikes that your Sebring Convertible can carry will be 2 bikes. I am including a link to a page that will list the choices of hitch bike racks that will work on your vehicle.
If you need a hitch for your vehicle I would have the Curt Class I 1-1/4 Inch Hitch, part # C11187. This hitch is an easy bolt-on... view full answer...
We do offer a light-duty 1-1/4-inch Class I trailer hitch for your 2008 Chrysler Sebring V6 Convertible, part # 24871. Please note that the part you referenced, Draw-Tite Class II hitch # 36448, is a fit only for the sedan, not your convertible.
If a bike rack or cargo carrier are in your plans please note that you must use a Class I-rated bike rack or cargo carrier. A Class I hitch is limited to carrying two bikes only - even if the rack holds more. Links are provided for both Class I... view full answer...
The trunk-mount rack I suggest for your 2008 Chrysler Sebring convertible is the Hollywood Racks Express 3 # HRE3. This rack's design allows it to clear your trunk-mounted antenna.
If you are willing to install a light-duty Class I hitch on the car, such as # 24871 from Draw-Tite, then you can avoid placing any extra stress on your trunk (and your antenna) by using a hitch-mount rack like the Swagman XC # S64650. Hitch racks put the entire weight load of the rack and bike on the car's... view full answer...
I found an owners manual online for the 2009 Chrysler Sebring and found that the vehicles with the 2.4 liter engine can tow up to 1,000 pounds gross trailer weight and 100 pounds tongue weight. The towing section starts on page 338 in the manual.
This does limit what you can tow quite a bit so I do recommend a different towing vehicle since you will not get much of a camper under 1,000 pounds.
If you do plan on towing with this vehicle then you can use hitch # 24871. The recommended... view full answer...
I would recommend going with the Draw-Tite Trailer Hitch, # 24871, for your 2008 Sebring Convertible, see included instructions.
For a cargo carrier I would recommend the Curt Cargo Carrier, item # C18145, which is a 17 by 46 inch carrier that fits a 1-1/4 inch hitch receiver. I've attached a video of this carrier for you.
If you would like to complete a towing setup you can use the T-One Wiring Harness, item # 118444, and a properly sized ball mount and hitch ball. If your trailer... view full answer...
If your 2007 Bayliner 245 cruiser is on the lower end of the length range for cover # 052963889680 then the additional slack in the cover will help it fit over the bow and side rails. This cover fits boats that are 22' to 24' (beam width 116").
This is the largest size we offer at this time. view full answer...
The Derale Transmission Line Compression Fitting Kit is designed to allow for you to connect a rubber hose to a steel line. The lines coming from the transmission are generally steel and the aftermarket transmission coolers will almost always use rubber hoses therefore, a fitting to connect the factory steel transmission cooler lines to the rubber hoses on an aftermarket transmission cooler is needed.
The factory steel transmission lines on your 2006 Chrysler Sebring are most likely a... view full answer...
Draw-Tite trailer hitch # 24871 will fit your 2008 Chrysler Sebring convertible with dual exhaust. It can be used to tow a rental trailer. The hitch has a 2,000 pound gross trailer weight capacity but check the vehicle owners manual to the Sebring's capacity and go by whichever is lower.
You will need the proper ball mount, part # 3594. To add a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118444 to add a 4-Way flat connector. I have... view full answer...
I have a solution for you, but the Curt # C11190 will not also fit on the 2006 Chrysler Sebring Sedan; it's only going to fit on the 2d convertible versions. Instead you'll want to use the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12186, which will fit on the 4d Sedan versions of the Sebring and also has a 1-1/4" that's great for carrying bike racks or towing a small trailer. This is a durable Curt trailer hitch that installs without any drilling required, so it's... view full answer...
Go To Results