The plug you found at the back of your 2024 Cadillac XT4 should match up with the Curt T-Connector # C44FR and will only show power when the running lights are on, the turn signals are used, or you are pressing the brake pedal. If you're testing it without using any of those functions on your vehicle then that would explain why you aren't seeing power at that connector.
If you did use those functions and you didn't see power then the next thing to check are the fuses related to the trailer... view full answer...
Hello Steve, thanks for reaching out. I double checked with WeatherTech and unfortunately they do not make a bug deflector for the 2025 Cadillac XT4. The most recent model year they make one for is the 2023. So there is nothing for the 2024 or 2025 models at this time. Looks like our listing needs to be edited. Thanks for bringing this to my attention, and sorry I don't have better news for you. view full answer...
The only hitch that we have, as of June 2023, that fits your 2019 Cadillac XT4 is the Curt part # C39FR. The etrailer hitch that you asked about, # e62AR, actually fits the XT5 models so it would not work for you.
If you were looking for trailer wiring too the Tekonsha kit part # 118795 is what I recommend as it installs very easily without requiring any splicing. view full answer...
We do have an updated installation video for the Draw-Tite Hitch item # 76266. We recently installed this hitch on a 2025 Cadillac XT4. I have linked the video below.
I can also get you connected to our installer network. If you go to the product page of the Draw-Tite Hitch item # 76266 and scroll down below the pics on the left side you'll see a box that says, SCHEDULE AN INSTALLATION. Go ahead and click on it and it will take you to a page where you'll be able to enter your zip code.... view full answer...
Your Jensen VR1825VWIN was specifically manufactured for Winnebago by Jensen. This is obsolete and you will need to replace it with one like the Jensen RV Stereo # JWM45. The VR1825VWIN has a cutout opening requirement of 7.2" wide by 3.7" tall. The # JWM45 has a cutout requirement of 7.06" wide by 3.375" so you will not have to enlarge the opening. view full answer...
Congrats on the new vehicle! The best hitch for a 2024 Cadillac XT4 is the Curt item # C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 400 lbs maximum tongue weight.
The reason the Curt hitch item # C39FR is the best option is because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures... view full answer...
You'll be pleased to hear the base of the:
-Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 measures 32" before the bar starts to curve upwards.
I have also attached an image showing this measurement for you to check out. view full answer...
Yes, the Curt Hitch item # C39FR will be concealed by the rear panel when you are not using the hitch on your 2023 Cadillac XT4. This hitch is custom fit and bolts directly to your XT4 with included hardware.
I have attached an installation video and some photos of the hitch with and without the cover for you to check out.
If you are planning on towing you will also need a wiring harness item # 118795 and a ball mount kit item # C45534. view full answer...
Yes, it is! To add a 2" hitch to your 2024 Cadillac XT4, I recommend the Curt Trailer Hitch item # C39FR. This hitch is custom fit and bolts to your Caddy with included hardware. I really like this hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need... view full answer...
The Curt trailer hitch for your 2019 Cadillac XT4, part # C39FR, actually installs on the same existing studs and with the same hardware that the factory bumper beam uses. During the installation the bumper beam is removed and the hitch fits over the studs. Then you reinstall the bumper beam over the hitch and fasten them both with the same M10 nuts that you would have removed to take off the bumper beam. So, there are no holes to drill into the Cadillac's frame.
The install details... view full answer...
To install a 7-Way harness on your 2024 Cadillac XT4 you will need two separate wiring harnesses because they don't make just one that'll do the job.
The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C44FR. This custom-fit T-connector plugs into your Cadillac's wiring harness, which is located behind the center of the rear bumper. This will provide you with a 4-flat connector.
The second harness you will need is the Universal Installation Kit for Trailer... view full answer...
The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs # BWRVK3500 has a binding issue with your king pin. The cam action latching handle sounds like it isn't functioning correctly. If the head has been damaged, I recommend replacing it. If it isn't damaged and yet isn't functioning correctly, I recommend contacting the manufacturer about coverage under the limited lifetime warranty.
If you need to replace the head unit, the Replacement Head Assembly... view full answer...
Yes, once the Draw-Tite Max-Frame Trailer Hitch Receiver # 76266 is installed on your 2022 Cadillac XT4 you'll be able to place that rear bumper fascia cover back over it for an OEM look.
I'm attaching an installation video and some photos for you to check out about this.
If you're planning on doing some towing with this hitch then I also recommend picking up the T-One Wiring # 118795, the Mount Bracket # 18144, and the Ball Mount Kit # C45154.
Attached are some additional videos for... view full answer...
By cross rails I believe you are referring to a roof rack, and we do have a fit for a roof rack on your 2023 Cadillac XT4, from Yakima. The rack consists of the following parts:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- SkyLine Towers for Yakima Crossbars # Y53TR
- Landing Pad 19 # Y00245
This rack will not only fit your '23 XT4, it will provide it with a quietest, durable, easy-to-use roof rack that also looks great. The rack is quiet because it has "WindRidges"... view full answer...
Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
I recommend adding the Yakima Same Key System item # Y07204 to help prevent... view full answer...
We do have a hitch confirmed to fit your 2024 Cadillac XT4! You want the Curt Trailer Hitch Receiver # C39FR.
This hitch has a bolt-on, no-drill installation and a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can round out a tow package by adding the Curt T-Connector Vehicle Wiring Harness # C44FR and the etrailer Ball Mount Kit # 989900. view full answer...
For your 2019 Cadillac XT4 the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C39FR is the correct fit. The installation details state the following for removing the fascia:
a. Open the lift gate.
b. Remove the plastic cover next to the tail light (each side) by pulling upward to release the clips.
c. Using a T20 torx remove the screws connecting the fascia to the vehicle (each side).
d. Remove the wheel well trim using plastic fascia removal tools. Carefully pull the trim... view full answer...
Yes, the Saris Bones EX 2 Bike Rack # SAR83FR is confirmed to fit your 2019 Cadillac XT4.
The Saris Bones EX 2 Bike Rack # SAR83FR does not come with any integrated locks. So if you want to lock your bikes to your rack, you would want to pick up a cable lock like the 8' Cable Lock and Lock Loop for Saris Trunk Mounted Bike Racks # SAR52FR. view full answer...
Hello Harrison, thanks for reaching out. I can definitely point you in the right direction, but I do not have a way to look up a dexter axle part number in order to know exactly what parts you will need. It sounds like you are looking for a disc brake kit or calipers for your axle. If you are needing a whole disc brake kit, I will need you to confirm the axle capacity, bearing sizes, and bolt pattern for the current setup.
If you are needing just calipers, we do offer Dexter calipers... view full answer...
I went ahead and checked out the:
-Draw-Tite Max-Frame Trailer Hitch Receiver # 76266, and was able to find a hitch height of 18".
Additionally, if you need help finding the correct rise/drop for your application, I'd be happy to assist.
All you're going to need to do is measure the distance from the ground to the top of the receiver, then from the ground the bottom of the trailer coupler, and subtract the two measurements. The difference is the rise/drop you need.
For instance, if... view full answer...
Go To Results