See what our Experts say about this Bulldog Winch Jump Starters and Jumper Cables

• Can I Mount a Winch On Top of a Dual Hitch Receiver?
  Yes, you will be able to use the top receiver opening on item # RM-077-2 for a hitch mounted winch to pull logs onto your trailer. I recommend going with the ComeUp Cub ATV Winch item # CU123933 with Mounting Plate for 2" Hitches. This winch comes with a 50 foot synthetic cable. I also recommend getting a winch power cable extension. Item # BDW20219 is 15 feet long extension with quick connectors on both ends.
  view full answer...
• How to Make 20 foot Long 2 Gauge Quick Disconnects for Winch
  I have a solution for you, but there isn't a 20 foot long version of the part # BDW20219 that you referenced. Instead you would need to provide 20 feet of 2 gauge wire and then use the # BDW20133 for quick connects on either end. These connectors are the same as what comes with the 24 foot # BDW20207.
  view full answer...
• Compatibility of Smittybuilt and Bulldog Winch Quick Disconnects
  According to my Bulldog Winch representative, the quick disconnect provided by their # BDW20197 and # BDW20219 would indeed be compatible with quick disconnects from Smittybuilt or Superwinch.
  view full answer...
• What Amperage Can 2 Gauge Wire Carry
  2 gauge wire can carry quite a bit of amperage but it depends on length. At around 20 feet it can handle 105-125 amps and then at less than 7 feet 250-300 amps. The part # BDW20219 is 15 feet long so it would be rated at around 125-200. You'd have to compare that to the amperage draw of the pump you have.
  view full answer...
• Will the Bulldog Cable Extension Work with the Replacement Bulldog Quick Connect Connectors
  Yes the Bulldog Winch Jumper Cable Extension Set part # BDW20219 and the Replacement Bulldog Winch Quick-Connect Set w/Dust Cover part # BDW20018 will work together. They are the same size and type Anderson connectors. The cable is heavy duty and does stay reasonably flexible when it gets really cold outside like most everything it gets harder to work with but overall it does lay out well.
  view full answer...
• Can Hopkins 2-Pole Flat Wiring Extension # HM47965 Be Used on 6 Volt Battery
  I have an option for you, but the Hopkins 2-Pole Flat Wiring Extension # HM47965 is made of 16-gauge copper wire, making it inadequate for use on a 6 Volt battery. You'll want to use wire that's 2-gauge or thicker in general for all components 6v or 12v, like the Bulldog Winch Jumper Cable Extension Set - Quick Connect to Quick Connect - 2 Gauge - 15' Long # BDW20219.
  view full answer...

Do you have a question about this Jump Starters and Jumper Cable?