bing tracking image
  1. Accessories and Parts
  2. Dutton-Lainson
  3. Electric Winch
  4. Trailer Winch
  5. Wiring
  6. Quick Connects
Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches
Dutton-Lainson

Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches

Part Number: DL24086
In Stock
$23.43
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Add a quick connect/disconnect feature for your Dutton-Lainson winch. Add plugs to power wires to make each hookup quick and easy. 1-800-940-8924 to order Dutton-Lainson accessories and parts part number DL24086 or order online at etrailer.com. Free expert support on all Dutton-Lainson products. Great prices and Fastest Shipping for Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (8)
  • Q & A (0)
  • Videos (1)
  • Photos

Dutton-Lainson Accessories and Parts - DL24086

  • Electric Winch
  • Trailer Winch
  • Wiring
  • Quick Connects
  • Dutton-Lainson

Add a quick connect/disconnect feature for your Dutton-Lainson winch. Add plugs to power wires to make each hookup quick and easy.


Features:

  • Handy connector for wiring your DC-powered electric winch
  • Tips and wires and are fed into plastic connector
  • Made in the USA


Specs:

  • Application: TW4000 electric winches


24086 Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winch





Video of Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Let’s Check Out the Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches

Today we're going to review part number DL24086. This is the Dutton Lainson Electrical Quick Connectors for the Dutton Lainson TW4000 Electric Winch. Now this part will allow you to add a quick connect and disconnect feature to your Dutton Lainson Winch. Basically you add these connectors onto your power wires that will go from your power supply to the winch, put these in between there to allow you to disconnect the winch from your power wires, makes installing your winch very quick and easy. The wires are connected to these terminals right here and then these terminals with the wires attached would be fed into these connectors and then your connectors are just used, will be pushed together for connecting and pull it apart for disconnecting. The terminals themselves, they are designed to accept a 10 to 12 gauge wire size and it is recommended when you attach the wires to these, to solder them for the good connection. This part is made in the USA and again, the application is for Dutton Lainson TW4000 Electric Winches and it does come with a nice set of instructions that explain how to make your connections. Basically how you would do that is, we'll take one of these connectors and then two of the terminals and what you'll do is cut your wire and then you'll connect your wire, the positive side to one, the negative wire to the other.

Then what you'll do is look at your connector, and on your connector it will have a plus on one opening and a minus on the other. Plus would be for your positive wire, minus would be for your negative. If you connect your positive wire to this, you're going to insert this in here. What you want to do is, with the hook down, you'll just insert it in there and then push all the way and it will snap or lock into place. Take your negative one with the hook down, put the terminal in there and, same way, just push it all the way in and then they're connected. You'll see you have your terminals on this side.

Then what you'll do is go to the wire, the other part of the wire after you've cut it. Take the positive to one terminal, negative to the other and you'll do the same thing on this one. With the hook down, make sure you put it in positive to positive, push it all the way in. Take the negative, again with the hook down, push it all the way in. Now with your wires going and connected to your terminals in there, this will give you your connection points. All you'll have to do is push it together just like that and you've made your complete connection.

If you want to remove your winch from your vehicle, just pull it apart, just like that. The other thing I wanted to show you is, if you're thinking once you put these in if you made a mistake and put the positive in the wrong position, to get it out, all you have to do is take a small screwdriver and just push on the clip that it clips onto and the terminal will fall, un-clip and then just push the terminal all the way out. You can do that for either one if you put them in the wrong way. That should do it for the review on part number DL24086, the Dutton Lainson Electrical Quick Connectors for the Dutton Lainson TW4000 Electric Winch. .

Customer Satisfaction Score:


Customer Reviews

Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches - DL24086

Average Customer Rating:  4.6 out of 5 stars   (8 Customer Reviews)

Add a quick connect/disconnect feature for your Dutton-Lainson winch. Add plugs to power wires to make each hookup quick and easy.

by:

I used the as a disconnect for a diesel tank. Very durable and work great. I ordered more for some other projects as well.



by:

You need to soldier the parts to the wire, not convenient

Mike L. profile picture
Etrailer Expert

Mike L.

7/19/2019

We do mention that the connectors need to be soldered into place in the product description video.

James profile picture

James

7/18/2020

Great use it to connect the winch on my boat trailet



by:

Quick delivery, easy hook up, works as promised



by:



by:



by:



by:

Awesomw



by:


8
8

See what our Experts say about this Dutton-Lainson Accessories and Parts

  • How Does the Dutton-Lainson Electrical Quick Connect # DL24086 Wire Up
    I attached a picture of the installation instruction page from the Dutton-Lainson Electrical Quick Connect # DL24086 that you referenced. It looks like you will need to cut the wires and strip the wires back 1/2 of an inch. Next you will need to put the wires into the contacts and then solder the wires into the contacts. Do not crimp the wires, these connectors are for soldering. Once the solder joints have cooled push the wire and contact assemblies into the housings with the lips of...
    view full answer...
    Image 1 for
  • How to Power Dutton-Lainson Winch # DL25200 with 2008 Chevy TrailBlazer
    Would you be able to send me some pictures of your setup? Typically winches like the Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200 are installed on the boat trailer and they draw power from either the tow vehicle battery via the 12V Power pin on the 7-Way connector, or from a separate battery. If you can give me some more details about how your winch is configured and what you have on your pickup and your Trailblazer I would be happy to help you get it switched over!
    view full answer...
  • What Size Wire is Compatible with Electrical Quick Connect for TW4000 Electric Winches, # DL24086
    The Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches, # DL24086, accepts up to 10 gauge wire. To secure the wire, you will need to solder it into place as it cannot be crimped. This product is designed for use with TW4000 electric winches. We also carry the Dutton-Lainson Electrical Quick Connect for DC StrongArm SA Series and TW9000 Electric Winches, # DL24085, which accepts 6 to 16 gauge wire. It is designed for use with DC StrongArm SA Series and TW9000 Electric Winches.
    view full answer...
  • Recommended Vehicle To Trailer DC to DC Charger for Multiple Trailer Batteries
    Your auxiliary power wire gauge at your 7-way along with the discontinued CTEK40186 will be sufficient to charge your trailer batteries. The CTEK D250S will amplify the signal from your auxiliary power to boost it to 20 amps versus the 2-3 amps of a system without the CTEK unit. Changing your gauge of wire to 8 and adding the # DL24086 connections will help slightly but if you are wanting to charge multiple batteries well and more quickly/efficiently, you really will want the discontinued...
    view full answer...
  • EZ Connector Magnetic 7-Way Trailer Connector For 7-Way in 2023 F-250 Truck Bed
    The EZ Connector Magnetic 7-Way Trailer Connector with Watertight Seal # 319-S7-05 is the correct part to replace the 7-way connector in your truck bed. This will make it compatible with the EZ Connector on your horse trailer. I imagine what you had to charge the battery was a quick connect like the # DL24086. If you can send me that picture I'll see if we have something that matches, or you could replace the connector on the trailer and the vehicle with a new style.
    view full answer...
  • Mounting Bracket for Winch Quick-Connect Wiring
    We do offer quick-connect winch wiring kits like # DL24085 and # DL24086 from Dutton-Lainson which are intended for specific winch products (based on their power requirements). Although we do not have a water-proof mount for these (or the Anderson SB50) we do offer a no drill bracket # C57202 which you could use as a mounting point for one of the connectors. These connectors have holes in them to allow for either securing one half of the connector to a trailer surface (the mounting bracket...
    view full answer...
  • Dutton-Lainson Quick Connect Electrical Terminals For StrongArm Trailer Winch When Launching Boat
    If the Dutton-Lainson Electrical Quick Connect # DL24086 for your Dutton-Lainson StrongArm Electric Trailer Winch # TW4015 gets wet when launching and loading your boat you should disconnect the circuits to protect them from damage in the water. Since they are not waterproof you can risk damaging the winch and wiring if they are submerged in water. I recommend mounting the connectors where they will stay dry and you do not have to worry about water getting into the connectors. Some Dielectric...
    view full answer...
  • What Quick Connects Do I Need to Install Quick Connect On My Bulldog Winch
    It sounds like you're looking for the quick disconnect that goes on the cables of your winch. If you've got a Bulldog winch you can use the Bulldog Winch Quick-Connect Set for Powersports w/Dust Cover - 6 AWG # BDW20047 if your winch has 6 gauge wires; if your winch has 1/0 gauge wires you'll want to use # BDW20172. Using one of these two parts will allow you to put the quick disconnect ends on your Bulldog winch. Once you've installed these on your winch, you'll be able to use the Bulldog...
    view full answer...
  • Is Dutton Lainson Quick Connect for Winches # DL24086 SY50 50 Amp Compatible
    Yes, the Dutton Lainson Quick Connect for Winches # DL24086 is SY50 50 amp compatible.
    view full answer...
  • Can Wiring Harness for StrongArm Electric Winch TW4000 Manufactured Before 2014 Wire to 7-Way
    So, just to make sure we're on the same page, the correct wiring harness for your Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200 manufactured before 2014 is the Dutton-Lainson Wiring Harness for StrongArm Electric Winch Model TW4000 Manufactured before 2014 # DL24150. As for wiring it to your 7-way, it is designed to go directly to your vehicle battery but you can wire it to your 7-way if you like, though there isn't an adapter for this. Keep in mind you will also want the Dutton-Lainson...
    view full answer...
  • Can Dutton-Lainson Wiring Harness For StrongArm TW4000 DL24152 Be Installed Under Bumper Of Truck?
    You can mount the Dutton-Lainson Wiring Harness for StrongArm Electric Winch Model TW4000 Manufactured after 2014 # DL24152 you were looking at underneath the bumper of your 2021 Ford F-150 to plug your Dutton-Lainson TW4000 StrongArm Electric Winch - Marine # DL25200 into without a problem. You would need to use the quick connects # DL24086 and # 10-1-1 to go from the winch to the plug underneath your bumper, or if the # DL24152 has enough length to go directly to the winch you can cut...
    view full answer...
  • Tips for Installing Dutton-Lainson Electrical Quick Connect # DL24086
    The install of the terminals into the housing of the Dutton-Lainson Electrical Quick Connect # DL24086 can be a bit more difficult than you'd think so I am glad you were able to figure it out! I've had to install similar connectors to this for an electric forklift so I know what you mean. I am glad you got it figured out and I am posting this so it hopefully will help future customers!
    view full answer...
  • Power Source Options For Electric Trailer Jack # UF38-944017
    The Ultra-Fab Electric A-Frame Jack, part # UF38-944017, requires a 12V power source. You have a couple of options for getting power to the power jack. You can use a quick connect like part # DL24086, and run a wire from the towing vehicle battery, which would enable you to unplug the connector when you are not towing the trailer. The other option for wiring is to attach the power jack wiring to the trailer mounted battery. The power trailer jack has an internal ground, so you will only...
    view full answer...
  • Quick Connects for Power a Trailer Winch from a Vehicle Battery
    There are some quick connect options for winches. We have # BDW20133 for 2 gauge wire, # BDW20047 for 6 gauge wire. We also have # DL24085 for 6 to 16 gauge wire and # DL24086 that accepts up to 10 gauge wire. I have included a link to our FAQ article on wiring an electric winch that should be helpful.
    view full answer...
  • Tips for Soldering the Dutton-Lainson Electrical Quick Connect # DL24086
    Soldering can be tricky. I've found when the solder isn't grabbing to a surface it's because it's not heated up enough. If it's attaching to one surface but not the other that means one surface is hot enough but the other is not. So since you are having a hard time getting it to attach to the socket that would be where you'd need to apply more heat. If all else fails you might contact an electrician. Try this with the # DL24086.
    view full answer...
  • How to Charge A Slide-In Camper Battery with The Vehicle Battery
    What you will need is a thick gauge wire, an isolation solenoid like part # PK5231201 and a set of quick disconnects like part # DL24086. You will run the wire from the output post of your Dodge Dakota alternator to the positive side of the battery in your camper using the isolation solenoid to prevent the battery from charging unless your truck is on and the quick disconnects for when you remove the camper shell from your truck and need an easy way to connect and disconnect the wiring.
    view full answer...
  • Recommended Wiring and Installation Instructions for Winch
    Single-Pole, Round Pin Trailer Wiring Connector, # PK11852, which you reference, uses #OO gauge wire, which we do not carry at this time. The best solution would be to use a winch wiring kit like the Winch Trailer Wiring Kit, item # BDW20043. This kit includes everything needed to install a connector at the rear of the vehicle and at the front of the trailer, for powering a winch. If you already have heavy enough gauge wire you can order the Electrical Quick Connectors, item # DL24086. For...
    view full answer...
  • Using a 7-blade RV Connection To Power a Trailer Mounted Winch
    I would not try wiring a winch through a standard 7-way connector. Winches draw much more amperage than the wiring that can be installed in a 7-way trailer connector can handle. The best solution would be to use a winch wiring kit like the Winch Trailer Wiring Kit, item # BDW20043. This kit includes everything needed to install a connector at the rear of the vehicle and at the front of the trailer, for powering a winch. If you already have heavy enough gauge wire you can order the Electrical...
    view full answer...
  • Recommended Wiring for Trolling Motor and Battery for Kayak
    For your trolling motor and battery, the RoadMaster 6-Wire Connectors - Trailer and Vehicle Ends # RM-910030-6 isn't the best option. Instead I recommend using the Dutton-Lainson Electrical Quick Connect for TW4000 Electric Winches # DL24086 and the # 10-2-1 wire sold by the foot. The Ring Terminal - 12-10 Gauge Wire - 3/8" Ring ID # DW05705-1 are great for the battery end. Putting the connections in the battery box is wise and will help.
    view full answer...
  • How to Release Quick Connect Electrical Connections
    Quick connects like the Dutton-Lainson Electrical Quick Connects # DL24086 that you referenced do not have a release latch built into them. Basically you just slide them apart. They can sometimes be difficult to get apart, but if you wiggle them while pulling on them they will release.
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924