bing tracking image
  1. Vehicle Suspension
  2. Timbren
  3. Bump Stops
  4. Towing/Load Leveling
  5. Rear Axle Suspension Enhancement
  6. Standard Duty
THIS ITEM IS NOT A FIT FOR
2004 Coachmen Clipper Camper
Special Savings on Select Timbren Items. See Cart for Savings.
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Timbren

Timbren Rear Suspension Enhancement System

Part Number: TDDR05
In Stock
$269.36
Retail:$316.90
You Save: $47.54
Vehicle Suspension
Not Confirmed to Fit

2004 Coachmen Clipper Camper

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
3,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use. Great Prices for the best vehicle suspension from Timbren. Timbren Rear Suspension Enhancement System part number TDDR05 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (7336)
  • Q & A (0)
  • Videos (2)
  • Photos

Timbren Vehicle Suspension - TDDR05

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • 3,000-lb Load Support: Keeps your vehicle level and stable when towing or hauling heavy gear.
  • Smoother, Safer Ride: Hollow rubber springs absorb road shock and reduce bounce on rough roads.
  • Better Steering Control: Prevents rear sag so traction, braking, and headlight aim stay consistent.
  • Reduces Roll and Sway: Independent left/right action keeps handling steady during turns or off-center loads.
  • No-Maintenance Design: Installs in place of bump stops with no air lines or adjustments needed.

Features to know about

Keep Your Truck Level Under Heavy Loads: 3,000-lb Rear Suspension Support

When the weight piles up in the bed or on the hitch, these hollow rubber springs add up to 3,000 lbs of extra support right over the rear axle. They step in when your factory suspension starts to squat, keeping your ride level so steering, traction, and braking stay steady. Whether you’re moving gear or pulling a trailer, the springs help eliminate sag and keep your truck handling the way it should.

Truck with noticeable rear-end sag under heavy load showing how weight affects suspension before Timbren system installation.

Smooth Out the Rough Stuff: Rubber Springs That Absorb Road Shock

Hauling heavy loads doesn’t have to mean feeling every bump. The Aeon hollow rubber design cushions road shock and keeps your ride comfortable when loaded. By absorbing jolts before they reach the chassis, the springs cut down on bounce and protect your suspension from bottoming out on rough roads. They take the hit so your truck and cargo don’t have to.

Empty truck bouncing on uneven road surface to illustrate road shock absorption benefits provided by Timbren suspension system.

Stay Steady in Crosswinds and Turns: Independent Spring Action

When a crosswind shoves your trailer or a curve leans you hard to one side, each spring reacts independently to keep things level. The setup reduces body roll and sway so the truck feels planted through corners and highway gusts. It also helps when loads are off-center, keeping both sides balanced for better control and less rocking.

Vehicle towing a trailer that is swaying on the road, illustrating how Timbren suspension helps maintain alignment and stability while towing.

Simple Bolt-On Install: No Drilling or Air Lines Required

This system bolts onto existing frame points above the axle using vehicle-specific brackets and included hardware—no drilling needed. There are no air hoses, compressors, or gauges to deal with, just a straightforward install that replaces your factory bump stops. Once mounted, the springs automatically adjust to load changes without any manual setup or air pressure maintenance.

Reliable Performance That Lasts: Progressive Rubber Construction

The convoluted hollow design compresses in stages, staying soft under light loads and firming up as weight increases. That progressive action gives you stability when you need it and comfort when you don’t. Built from durable rubber that flexes rather than cracks, these springs deliver long-term dependability while protecting your suspension from wear over years of towing and hauling.

Specs

Included Components

  • Includes: 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
  • Replaces: Axle bump stops on frame
  • No drilling required

Weight and Capacity

  • Capacity: 3,000 lbs
  • Do not exceed the vehicle's weight-carrying capacity

Compatibility and Installation

  • Designed to work with: A suspension system that is in good working order

Warranty

  • Limited lifetime warranty - satisfaction guarantee

DDR05 - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TDDR05 Installation instructions

This Product Fits The Following Vehicles




Video of Timbren Rear Suspension Enhancement System
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for 2005 Dodge Dakota Timbren Rear Suspension Enhancement System: Complete Installation

Today on our 2005 Dodge Dakota, well be installing the Timbren Suspension Enhancement System, part number TDDR05. Before we begin installing our new Timbrens, well first need to remove the old or manufacturers bump stop. To do this, well remove the fasteners securing it in place, tilting it down away from the frame and unhooking it out of the frame. Well go ahead and set the old bump stop aside as it will not be reinstalled. However, do hang on to the fastener as well use it with the new hardware. Now that we have the manufacturers bump stop out, we need to go ahead and take the weight off the rear suspension.

Since we have ours up on a lift well go ahead and raise the body of the vehicle. Now, well go over to the bench and assemble our new Timbren spring. Well take the upper bracket which has a threaded nut built-in, the Aeon spring with a built-in washer and our bolt running it through the washer up through the Aeon spring and into the upper bracket. Once we have it installed, well can go ahead and tighten it down. Just as we removed the old bump stop, well install our new Timbren.

Putting the hook into the frame and then swinging the bracket up against the frame securing it with the manufacturers fastener we removed previously. Now with that done, we need to assemble and secure the lower fastener. Well take the lower fastener bracket and feed it over the axle and into position. Then we can take the lower bail clamp, slide it up over the lower fastener and secure it with a flat washer and lock nut. And well go ahead and repeat the same process on the drivers side.

We can go ahead and put the weight of the vehicle back down onto the suspension, bring our Timbrens into normal resting position. And that will complete the install of our Timbren Suspension Enhancement System, part number TDDR05 on our 2005 Dodge Dakota.

Ratings & Reviews

4.7

7336 reviews
5 Stars
(5904)
4 Stars
(889)
3 Stars
(208)
2 Stars
(136)
1 Star
(199)
Review Sort Icon
by:
On the positive side, I did get another 2" of lift which I needed for my rear Torklift frame mount tiedowns which hang low. The truck stance is now closer to where it was when unloaded. It sways less in turns when loaded with the truck bed camper. On the minus, the ride is a tad harsher but tolerable. Also the kit came with a spacer and left it to me to decide that I shouldn't use it if I want the 1/2 to 1 1/2 recommended clearance when no load is present in the truck bed.
Lazer S. profile picture
Etrailer Expert

Lazer S.

9/30/2025

Timbren bump stops can be on the harsh side, but they do a great job of getting rid of sag and you are not the first person I have heard say they helped with sway as well. Do you tend to leave you camper in the bed full time, John?

John profile picture

John

10/1/2025

Yes, I do leave the camper in the bed full time except for winter storage. The camper weight is 1,041 lbs. The load carrying capacity of my Dakota is 1,566 lbs.
by:
First of all…I’m a 64 year old woman that is 5’4” tall. I put these on myself in the garage by jacking up the rear bumper to lift the suspension. One or twice a week I hook up a 16’ trailer and put 2 mowers on it that weigh 1100 lbs each. Before I installed these, the chains in the trailer were dragging on the ground even after I wrapped them a couple of times. Now…they are 6-8” off the ground.
This product is wonderful and easy to install. When my truck is not pulling the trailer, it rides much better. I would recommend these to small truck owners if they need a little extra support. By the way, the kit came with 1” spacers that could be installed on each side, but I didn’t see a need for them.
by:
2010 Dodge Dakota
This was my second experience with Timbren. This was for my 2010 Dodge Dakota. Great platform without a lot of aftermarket support. Timbren had a set of these designed just for my truck. I installed and it solved the sagging rear end of the truck and swaying when cornering when carrying my pop up slide in camper. This is a n easy install and completely worth the investment.
by:
2008 Dodge Dakota
Seventeen year old springs were not holding the weight like they use to. Helper springs did little to help. These make it ride (haul and tow) like it use to.
by:
Dodge Dakota
2006 dodge Dakota, didn’t fit like it should. I had to do some grinding to get the bracket to fit. They rest on the axle without a load on the truck. Pretty uncomfortable ride. I’d suggest getting air bags instead.
by:
These worked well on my 2006 Dodge Dakota 4WD Quad cab with the 4.7L V8. I trailered loads back and forth between Florida and Connecticut on my 6.5 x 12 foot trailer and the bed of the truck was loaded at the same time and these rubber suspension pieces worked well. I installed the full system with the cone and disk which means the ride around town when the truck was unloaded was a bit rough but not uncomfortable. I think these are a much better choice than the auxillary metal springs applied over your factory leaf springs.
by:
Stopped rear end sag to less than 1 inch with heavy 22 foot boat was a little harder to install on the right side because of catalict converter and sway bar great shipping and service
by:
Dodge Dakota
Installed on my Dodge Dakota due to my Atv blowing my suspension out of my truck. Once they were installed it immediately fixed the problem and makes a very comfortable ride when the truck is loaded. When the truck is not loaded it is somewhat bumpy of a ride.
by:
2005 Dodge Dakota
Product arrived sooner than expected, yea!!! All components were easily installed thanks to your videos. A test drive today revealed that all is in good working order. Thanks so much for the prompt delivery and very descriptive videos.
by:
2005 Dodge Dakota
They helped in keeping my 2005 Dakota from squatting so much when pulling my boat and made it easier to pull, they did make truck stiffer which lead to a rougher ride when not pulling the boat that’s why I gave it a four star and not a five



by:
100% satisfaction guaranteed
by:
2005 Dodge Dakota
Very happy with this product. Easy to install and performs well
by:
2006 Dodge Dakota
GREAT PRODUCT!!
by:
by:
by:
by:
2022 F250 Super Duty. Super easy to install. I have about 3/4" gap between the spring and the plate. Time will tell how they impact the ride quality and how much sag they mitigate with my 5th wheel hooked up.
Jay S. profile picture

Jay S.

8/14/2026

Now that its been a year Im very impressed with them. Theres no ride detriment without the 5th wheel attached and they do a great job of mitigating squat

by:
It has been almost a year since I installed Timbren Suspension Enhancement Systems (DVF350 and DVR350R) on the front and rear of my 2003 Dodge RAM Van 3500. These bumpers replaced the OEM bump stops that were on my van. I like the Timbren bumpers much better than the OEM bump stops because they provide a progressively cushioned response for suspension compression when traveling over significant humps like speed bumps in a parking lot, or curb ramps into driveways. I did not like the abrupt stop the OEM bump stops provided when traveling over the same objects. I installed the Timbren rear bumpers first, and after a few months of use, I decided to add them to the front. In both cases, the front and rear Timbren bumpers were easy to install once the OEM bump stops were removed. Installation required reuse of the factory hardware. On my van, the Timbren bumpers are not always engaged. Under normal load and travel conditions the bumpers are relaxed and about 1/2” away from the suspension landing points. However, their presence is much appreciated and very noticeable when the van is carrying heavy loads or handling significant humps.
Kate F. profile picture
Etrailer Expert

Kate F.

5/6/2026

Glad to hear the Timbren systems worked out so well for your RAM Van Mitchell! It’s great that you noticed the smoother, more progressive response compared to the factory bump stops, especially under load. Thanks for sharing your experience with both the front and rear installs, that’s really helpful for others considering the upgrade. What kind of loads are you usually hauling with your van?

by:
Absolutely Pleased with the TIMBRENS. They were easy to install, and took less than an hour to install both. I noticed a slight stiffness in the ride as the rear bounced over a bad roadway. Towing is great, with a nice level and smooth ride. I am glad that I did not order the heavier duty Timbrens, than what was recomended for my truck. I believe the ride would have been too stiff. If you look at the photos showing the timbrens, the truck is still lifted in the rear, so what you see is a big gap between the rubber, and the steal plate. When the truck is lowered, there's 1" of space as it should be. BTW, I have been purchasing from etrailer for years now, and I have to say that I have never had any issues with any orders. They are my go to folks for all of my vehicle suppension stuff and trailer stuff. You can't go wrong with buying from them.
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/7/2025

Wow, thank you for sticking with us, Don! That is awesome. I think you made an excellent choice here. Timbrens are tough and the heavy duty are SUPER tough. Glad to hear these were a good fit. Love the photos! Is that your own property?

Don profile picture

Don

5/21/2026

The TIMBRENs work as stated during when I am pulling anything heavy. However, when the truck is not pulling anything, anyone riding in the rear seat gets a very hard jarring jolt when driving over any roadway repairs, bumps, expansion joints on bridges. I wished that I would have went with the Super Springs, or the Road Active Suspension. I may replace the TIMBRENS later.

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

5/21/2026

@Don I'm sorry to hear that the Timbrens didn’t pan out to be as great as you originally hoped. Swapping over to the SuperSprings or the RoadActive Suspension will definitely have less of an impact on your day-to-day driving. Out of the two, the RoadActive Suspension would have the least effect. If you ever have questions about the RoadActive Suspension or the SuperSprings, let me know and I’d be happy to help out.
by:
The timbres bump stop is exactly the right height to meet the axel when the trailer is connected with all its weight onto the hitch. I have an Andersen weight distribution hitch and it levels out perfectly. The day picture is with the coach (Winn 2100bh) with factory equipment. The night picture is after the timbres are in place. Looks good.
Lazer S. profile picture
Etrailer Expert

Lazer S.

6/16/2026

They definitely look like they are helping, Orlando! How are they when you aren't towing? We hear a lot of people say they can be pretty harsh when unloaded.

by:
Installed the Timbren TFR250SDJ on my 2025 F-250 Platinum Plus 4WD Short Bed with 6.7 HO Powerstroke. Fit perfectly. It takes a few minutes to get the bags attached to the base. It seems like the bolt is too long but I used a vise to hold the unit while I tightened it down more and cinched the bag to the base. So if it seems it wont get tight enough and is still loose, find a way to secure the base... there's still a few more turns.

Attaching to the truck takes a few minutes to remove the OEM (2 nuts) and a few minutes to install the Timbren SES. I added about 45 minutes by dropping one of the nuts, which I finally found inside the shock absorber bracket!!

I used a hand socket but would recommend air or power tools, if you can get to the nuts, but it can be done manually. Probably took me a few extra minutes with a socket wrench because of limited space, and I'm old!

I have not tested the SES under load yet, but I was really more concerned with the ride unloaded.I ended up with a gap right at 1" between the peg and bottom of the SES. Some reviews said the unloaded ride worsened. So I drove to the nearest small town with horrible streets, bumps, holes, broken concrete, sewer covers 3" below the asphalt, etc. On the highway, the ride was perfect, completely unaffected. On my bad road obstacle course, I thought the ride improved significantly. So I think the system will give a better ride unloaded. It was a little stiffer, less roll, and smoother. It was not "bouncy" or jarring, like some reviews mention. Very smooth and felt beefier on bad roads.

I'll update after I've driven loaded. I tow a 12,000# 2025 Rockwood TT 36' with a ProPride 3P hitch. We put 7,000 miles on it across 15 states this past year, so I've definitely got a "before" baseline using the OEM bumpers.

The ordering process was great. Naomi D had great product knowledge. At first I thought I was talking to my granddaughter, but after putting her through the paces, It felt like I was getting sage advice from my Grandfather. e-Trailer seems to really invest in their customer service reps knowledge base. Also completely satisfied with the order process and delivery. They were able to mail to our PO Box, which seems to be a problem for most (our physical address is a gate on the side of a highway, with cows on the other side).

100% satisfied so far and would recommend both e-trailer and Timbren to a friend. Will update once I've done some towing, but can say the unloaded ride is unaffected or improved for my application. So far, very happy.
Robin H. profile picture
Etrailer Expert

Robin H.

9/22/2026

Thanks for taking the time to share such a detailed review and all of the pictures! The unloaded ride is a concern we hear fairly often with SES upgrades, so your experience with the 1" gap and rough-road testing will be really helpful to others considering these for their F-250. We appreciate the kind words about Naomi and our team as well. Looking forward to your update once you get some miles on them with the Rockwood!

by:
A very simple and straightforward installation once you get the oem bumper stops off (had a shop do that)
Timbren worked with me as I had a non OEM frame height (vehicle was lower than stock) to recommend the proper kit. Highly recommend contacting timbren if you are unsure of the proper kit to use. Ride is more stable. It does feel stiffer and less bouncy but am looking forward to seeing how it performs with my truck camper. Truck is a 1998 dodge ram 2500. Brake line over left side of axle needed to be secured to prevent damage.
Heather A. profile picture
Etrailer Expert

Heather A.

4/24/2026

Hi there, thanks for reaching out, that’s actually a common issue with this type of trim. The one you tried is a standard flat insert, but some RVs (like your NOBO) use a slightly domed trim to help it sit over the screw heads in the track. If the screws stick up even a little, a flat trim won’t fully snap in place, which sounds like what you’re running into. The best way to find the right replacement is to remove a small piece of your original trim, lay it flat, and measure the full width from edge to edge. Most are either 3/4" or 1", but the shape matters too, not just the width. If yours has that domed profile, you’ll want something similar or a softer vinyl that can flex over the screws. If you’re able to send a quick photo of your track or old trim, I’d be happy to help you find a better match.

by:
2001 toyota Tacoma
Well they are exactly what I thought it would be. Hard for me to say it's what I needed yet.
I installed them on a homemade trailer from a salvaged 2001 base model tacoma. Once I get finished building it out and have some weight in it I'll have a better idea. But from what I've seen so far on a couple test drives they should come into effect when needed.
For reference I building an Tacoma based trailer with an ARE Contractor topper with a Naturnest roof top tent on the very top. So to counter and sway these should be very helpful. At least I hope so. I'm not an engineer but I did stay at an Holliday Inn once.
Mike L. profile picture
Etrailer Expert

Mike L.

4/23/2026

Niiiice, I see what you did there!! That looks like a sweet setup!

Mike L. profile picture
Etrailer Expert

Mike L.

4/23/2026

@Bill That's outstanding, good job!!
by:
2025 Chevrolet Silverado 2500
The Timbren SES is a simple solution for rear squat when towing. When hitched to my 30' Airstream Globetrotter (8800 GVWR) with a tongue weight around 1200 lbs, my Silverado 2500HD had a bit more squat than is ideal. I shopped airbags but didn't want to spend ~$2K for the set up and didn't want the hassle of installation and forever chasing air leaks. The Timbren SES literally installs on the Silverado in about 15 minutes. So simple. No bags, no compressor, no wiring, no air lines, no leaks. And WAY less expensive to boot. Just returned form a 600+ mile trip and it towed flawlessly.
Mike L. profile picture
Etrailer Expert

Mike L.

4/2/2026

Glad to hear they worked well for you Jerrod. Hope you had a good trip!

by:
I've had these on our tow rig for a year now and I added buy them again today if I needed them.these have worked much better than airbags for our coil spring rear suspension to handle the tongue weight of our trailer. The SUV sits level when the trailer is on and it handles bumps and sway better than the airbags did providing much more comfort to us in the vehicle. Unloaded, we don't really notice they are there, unless, we have all the kids and some friends loaded up and you will fell them work when going over bumps.i do all my maintenance on the vehicle's and inspect these regularly and I cant see any wear so far even though we've gone on 6 trips with our trailer with about 5000 miles doing so.
I cant say these are the best for every truck or SUV, but for ours it is the best and I definitely would recommend to others.
Mike L. profile picture
Etrailer Expert

Mike L.

2/26/2026

Thank you Darrell, we're glad to hear your Timbrens are still on the job!

25
7336
true
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • Timbren Rear Suspension Kit that Fits 2006 Dodge Dakota
    Hey Steve, what you would want is the Timbren kit part # TDDR05 that fits your 2006 Dodge Dakota. This will give your truck additional rear suspension support so that it doesn't sag when towing your travel trailer.
    view full answer...
  • Recommendation for Eliminating Sag in the Rear Suspension of a Dodge Dakota when Towing
    The Timbren Suspension System, item # TDDR05, is designed to help with stabilizing and leveling your 2007 Dodge Dakota while providing a more comfortable ride when towing or carrying a heavy load. When towing a trailer that causes the rear of the vehicle to sag you will not be eliminating the problem with the Timbren system, because all of the weight of the trailer tongue will still be on the ball and the hitch. The rear of the vehicle will remain more level but the tongue weight will still...
    view full answer...
  • Suspension Enhancement and Weight Distribution with Sway Control for a 2006 Dodge Dakota Quad Cab
    Adding springs, like the Timbren Rear Suspension Enhancement System, # TDDR05, will help to keep your truck level. This system will work on both 2 wheel drive and 4 wheel drive models of the 2006 Dodge Dakota Quad Cab. I have included a link to the installation details below. For your trailer sway problem, I recommend adding a weight distribution system with built-in sway control. This will also help to level your truck. I recommend the Reese Round Bar Strait-Line Hitch with Shank, # 66086....
    view full answer...
  • Weight Distribution Recommendation for a 2010 Dodge Dakota Towing a 3,000 Pound Trailer
    In cases such as yours where suspension enhancement is not solving the problem you would benefit from using weight distribution. If the tongue weight on your trailer is 500 pounds, loaded and ready to tow, you will want a system with a tongue weight capacity range that encompasses that 500 pound tongue weight. I recommend a system with a range of 400 to 800 pounds. You can use the Pro Series RB2 Round Bar Weight Distribution Kit with Shank, # RP67509. This system has a 400 to 800 pound...
    view full answer...
  • Timbren Suspension Enhancement that Fits 2007 Dodge Dakota with 2 inch Lift
    The Timbren kit part # TDDR05 is a fit for your 2007 Dodge Dakota and the only option since you have a 2 inch lift. You'll need to use the spacers # A25723-90AH00 for each inch of a lift you have. So you'd need a total of 4 of these to take up the space created by the lift kit that you have. The Timbren kit gives you the same support as the air bags but it's a much easier install and easier in the long run as well since you don't have to maintain air pressure or worry about leaks.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Lincoln B
Updated by:
Lincoln B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Installed by:
Robert C

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.