Features to know about

Stay Level and Confident Under Heavy Loads: Up to 5,000 lbs of Load-Leveling Support

When heavy trailers or bed loads make your rear end sag, steering and braking can get sketchy. The LoadLifter 5000 Ultimate air springs add up to 5,000 lbs of load-leveling capacity to keep your truck sitting level and handling steady. Whether you’re towing a camper or hauling gear, these bags share the weight across all four wheels so your suspension doesn’t bottom out and your headlights stay aimed where they should.

Ride Smooth Even When the Air Pressure Drops: Built-In Urethane Jounce Springs

Air Lift’s internal urethane jounce springs act as a safety net and comfort boost inside each air bag. If air pressure is low, the jounce springs step in to absorb bumps and shocks, keeping you from bottoming out until the system’s re-inflated. They engage progressively—the heavier the load, the stiffer they get—so your ride stays smooth and controlled even on rough roads or uneven loads.

Fine-Tune Your Ride for Every Haul: Adjustable 5 psi–100 psi Air Pressure

Every trip is different, so having control matters. With manual inflation valves and air lines included, you can dial in the pressure from 5 psi to 100 psi depending on how much weight you’re carrying. Equal pressure levels your truck front to back, while independent pressure tuning handles side-to-side balance when loads are off-center. Add an optional compressor kit later if you want in-cab or wireless pressure control.

Built for Heavy-Duty Work: Reinforced Rubber Air Bags and Corrosion-Resistant Endcaps

These 2-ply, fabric-reinforced rubber air springs are made for real hauling duty. Zytel nylon endcaps are lighter than steel yet stronger and more corrosion resistant, preventing leaks that weaken other systems over time. Exclusive roll plates guard the bags against contact with moving parts under the vehicle and boost load capacity by spreading out the surface area for a steadier ride at lower pressures.

Straightforward Installation for DIYers: Mounting Brackets and Hardware Included

Installing true suspension support doesn’t need to be complicated. The LoadLifter 5000 Ultimate system comes with all brackets, hardware, and inflation lines needed for a bolt-on setup using basic tools. Once mounted, just inflate through the included valves—most people put them on the bumper for easy access—and you’re ready to tow with confidence backed by a lifetime warranty and 60-day satisfaction guarantee.