9012 LED Headlight Bulbs with Anti-Flicker Harness - Single Beam - 1,995 Lumens - Cool White - Qty 2

Video Transcript for Review of ARC Vehicle Lights - 9012 LED Bulbs with Anti-Flicker Harness - ARC39VR

Ellen: Hey everyone. I'm Ellen here at etrailer.com. And today, we're going to be taking a look at the Replacement LED Bulbs and also the Anti-flicker Harness. Now, this is going to come as a kit so you can get everything installed all at once and it allows you to replace your headlight bulbs with an LED bulb. That's going to be the 9012 or 9012 style bulbs, and it also comes with the harness to go with that. If your vehicle is CAN bus or PWM equipped, you'll need this harness to prevent any kind of flickering or that kind of shuddery effect that can sometimes happen with LEDs going into those vehicles.This is going to be a custom fit.

We can just plug and play with this. You don't have to worry about any kind of cutting or splicing, so really easy install. The lights are also made with a precise output. It's not just going to make the light go out everywhere. It's going to have a pretty precise pattern, so that's going to help to prevent us blinding other drivers on the road.

I'm going to hook this up to power and ground. You want to be sure to note the polarity here. They are polarity sensitive. Whenever you're plugging it into your wiring, just keep that in mind. Typically, the black wire is going to be ground.

The red wire is going to be power for your harness. It is actually marked on the bulbs themselves so it makes it a little bit easier to see which one is which.I'm going to turn that on. See our bright light comes on there and it kind of has that pattern. You can see, on the one side, it's only puts it out so far. It helps us to get that dialed in and you can rotate this housing around to match up with the housing in your vehicle so you can get that lined up where it needs to be.

It's also a nice, cool white color so that's definitely going to promote better visibility while we're out on the road. Whoops, and make it easier to see what's going on at night.As far as the more technical information with these, they are going to be a IP67 rated. That means that they're impervious to dust and weatherproofed so no worries about any water or dust getting in there causing any issues. We get the two bulbs, the two harnesses, some stuff to help us mount up that harness. We got two zip ties and two pieces of double-sided adhesive, instructions, sticker. The light output for each of our bulbs is 3000 lumens for the raw output. The effective lumen output is 1,995 lumens. That's going to be more the number to pay attention to since that's more the real-world application for the lights. After about 30 minutes though, that does drop down to 1,550 lumens. Still a bright light, but it does drop down a little bit after about that 30 minutes of continued usage.Our wattage is 16.5 Watts per bulb. The power draw at 13 volts is 1.3 amps per bulb. Our operating voltage goes between 7.5 volts and 16 volts DC, and it does have a two year limited warranty.That's about all there is for me to talk about with you guys for these lights. I hope this video has been helpful in deciding if they're the right ones for you. Again, I'm Ellen here at etrailer.com. Thanks for watching.