To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
Features:
Specs:
This ether fuel injection system offers a hassle-free way to get fast, reliable startups in cold weather. Once activated, a measured shot of ether is vaporized and sent into your intake manifold. This vapor serves as a catalyst for combustion, helping to ensure that your engine starts on the first try, even in cold temperatures. The system is entirely manual and requires no electrical power, making it ideal for tractors, logging equipment, and other vehicles and machinery that can't be parked close to an outlet. Once the system is installed, there's nothing else that you need to do to maintain the system other than change out the fuel canister, which will need to be done after approximately 200 startups. This system is designed to work with an 18-oz canister of ether fast flash fuel (not included).
Just trigger this Ether Start fuel injection system by pulling the knob that installs in the cab of your vehicle as you crank the engine. The cable that the knob is attached to will tug on the lever of the actuating assembly. This releases the ether into a metering chamber that will discharge 5 - 6 cc of liquid ether out through the nozzle. The nozzle's built-in filter vaporizes the ether, which is then injected into the intake manifold as a vapor instead of a stream. For the most effective and smoothest start, install this system so that the nozzle orifice is perpendicular to the manifold length.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, Steven here with etrailer.com. Let's take a look at our Kat's Heaters Ether Start Fluid Injection System made for 3.3 liter all the way up to 8.2 liter engines. Now, folks, this is made to be used with an 18 ounce fuel cylinder of ether. That's not included, so you would have to purchase that separately. Basically, this whole kit's gonna give you a pull cable fluid injection system to give you a quick shot of ether for reliable startups in cold weather by specifically injecting that ether into either the intake manifold. Now, again, it is a manual pull cable application, so you'd have this routed up up to maybe under your dash somewhere to where you could pull this to make a shot of ether go into the manifold.
No electricity, no battery made. You don't have to worry about having another person spray fluid as you turn the key. You're not gonna have to worry about over-injection. The actuating valve meter here is gonna put out only five to six CCs of ether for each pull of the nozzle here or the cable, and that's gonna prevent engine overload. Now, this spray nozzle has a built-in filter vaporizing the ether to make sure that it's gonna give you a nice, clean burn and prevent manifold flashback.
So, pretty much once you get this installed, it's maintenance-free. All you'll have to do is untwist the old can of ether and put a new can in, and then this safety cap here, basically you can mount it right next to it somewhere, that way if you had to put a new can in or something and you wanna keep dirt and debris out while you're getting a new can or something, you got that option. You get the fuel line, everything included here. This cable is a seven-foot-long cable. All the brackets to hold the cans of ether, all the hardware here for installing it.
Well, folks, that's gonna wrap it up. Just a quick look at our Kat's Heaters Ether Start Fluid Injection System. I'm Steven, thanks for watching.
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
Simply pull a knob that installs in your cab to inject ether fuel (not included) into your intake manifold and get fast, reliable startups in cold weather. Manual design means you get to choose when fluid is dispensed, and no electricity is needed.
Fast service quality of item was excell ent
Excellent service
You had the right product & a great price made me & my customer very happy- thanks again
Have not installed yet, but looks well designed and should work as advertised. This will be replacing a factory injection system on an old IH D260 tractor. I have been able to order and receive overnight a bottle of ether from NAPA.
product that I ordered was outstanding... just what I was looking for.... shipping was fast... Thank you very much.... I will order from you again
even though the order was back ordered the company kept me well informed thru out the waiting time ....
Great product. Good quality I can rely on. Needed installation instructions and should’ve came with Teflon.
Do you have a question about this Vehicle Heater?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.