Optronics Strobe Warning Light - SAE Class I - LED - Red - Permanent Mount

Video Transcript for Review of Optronics Emergency Vehicle Lights - Red LED Strobe Warning Light - OPT29AB

Hello neighbors. Steven here with etrailer.com. Let's take a look at our Optronics Strobe Warning Light. It's an LED red permanent mount. Now folks, later on there will be some flashing strobe lights. So I just wanna warn you ahead of time.

I'll let you know once we get to that part. But if you're susceptible to those kind of things, when I'm gonna let you know, you might wanna turn off the video at that time or pause it and fast forward. Now getting into it, this is gonna give you a nice red LED beacon strobe light for your vehicle and provide a warning signal to increase safety. It's gonna be great for emergency use, maybe towing, plowing, transportation, warehouse use, agricultural use, pretty much anything you want. It is SAE class one certified for emergency applications and California Title 13 class B certified as well.

It has an electromagnetic interference shielding so that your lights can't be disrupted or turned off during those kind of things. And the LEDs are highly efficient, bright, durable, and long lasting. The lens here is a nice polycarbonate housing with an aluminum sealed housing, a mix that's gonna be durable and weather-resistant. It has an 18 inch long cord, that's a three wire system. I've got it kind of pre-wired here with my little cheater box.

I can show you here in a second. But basically you'll have a powered ground and then you'll have a yellow wire. That yellow wire, if you tap that onto the power wire, that's how you're going to switch between strobe functions. Now you get three included aluminum screws. That's gonna be a way to permanently mount this.

And they are aluminum again, so you don't have to worry about them rusting out, corroding, that kind of stuff. The housing is four and three quarter inches tall with a base diameter of four and 11 sixteenth inches wide. It runs on 12 to 24 volts. And we're gonna go ahead and get into the stroke functions now, folks. So again, pause the video, stop it, or fast forward if you need to. I'm gonna shut off the overhead lights and we're gonna get into it. All right, so again, we're just gonna simply tap on to change the strobe function and bear with me here. And you just get to hold it for like a second or two and then it swaps to the next one. Now again, once you find one that you like, out of the 10 options, you can obviously hard wire up that way, have it ready to go. Every time you turn it on or off, it would start exactly on the one that you had left off with. All right, and that will wrap it up. I'm gonna go ahead and shut this off and turn my overhead lights back on. And folks, that's gonna wrap it up for our quick look today. This has been our look at the Optronics Strobe Warning Light, LED, red. I'm Steven, thanks for watching.