Arrives before Christmas 
3/4" Round. Waterproof mini trailer light functions as both a clearance light and a side marker light when properly mounted. GloLight lens creates a smooth, bright circle of light. Recessed mount with included grommet. 2-Wire pigtail. PC rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
Recessed-mount trailer lights install underneath with included grommet. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Optronics glow light LED red clearance and side marker light. This small round trailer light can function as both a clearance light and side marker light when properly mounted. It's got a nice sealed, water-proof housing that's submersible. It is an LED system. LED's are going to make great replacements for incandescent lights. They're going to last longer, burn brighter and they're much more efficient.
You don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. We're looking at a red poly-carbonate lens. It's designed to be a recessed mount. It does include the black PVC grommet that you see here. When mounting this it is going to require a three quarter inch diameter hole at the desired mounting location. We're looking at a two wire design, white wire is for ground, black wire is for power.
The unit is department of transportation compliant. This is a PC rated light. It's going to measure three quarters of an inch in diameter, it's going t to contain two diodes, two LEDs. The power drawl is going to be 0.052 amps at 12.8 volts and Optronics is going to put a lifetime warranty on the LEDs. Let's go ahead and hook it up to an external power supply so you can see what it look likes in a low light setting and with power running to it.
You can see here that the light puts out a nice consistent signal. Plenty of light out put. Again, this light is designed to function as your clearance and side marker light. That's going to do it for today's look at the Optronics glow light, red clearance and side marker light.
nice lights, great service!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.