4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Built-in reflector. Durable black ABS base. Twist-in bulb socket. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics trailer clearance or side marker light. This rectangular trailer light serves as either a side marker light or a clearance light for your trailer. Features a really nice red acrylic lens with the reflex reflector built in. The lens is replaceable if ever needed. And then on the bottom we have a black ABS plastic base. Internally it has one incandescent bulb.
Uses bulb number 194, which is included. It mounts directly on the surface of the trailer, so what you'll need to do is remove the lensing to gain access to the two mount holes, and then use mounting hardware to get it installed. Hardware not included. It does have that twist in bolt socket with the power lead and ground wires. It's Department of Transportation compliant.
It is a P2 rated light.When it comes to the overall dimensions, starting with the overall length going edge to edge, looking at about four inches by two inches, and the overall depth is about one inch deep. The mount holes are separated on center by three inches and they have a diameter measurement of a quarter inch. We're gonna go ahead and hook it up to power; that way you can see what it looks like with power running to it, and we'll also turn off our overhead lights so you can see it in a lower light setting. Now this unit contains one incandescent bulb. Sends out a nice consistent signal, and here you can see that reflex material is built in to the lens.
Increases safety and visibility. It's a really nice design, plenty of light output, and again that bulb number, if you ever need to replace it, it uses bulb number 194.That's gonna do it for today's look at the Optronics trailer clearance or side marker light.
This is a great value for the price!!!
PERFECT!
PERFECT!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.