Product Experts Available Now!
Call 1-800-940-8924
Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
(364 reviews)
Price: $91.44
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
Part Number: CE44VR
In Stock
$91.44
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (364)
- Q & A (0)
- Photos
Command Electronics Trailer Lights - CE44VR
- Tail Lights
- Rectangle
- LED Light
- Red
- White
- Brake/Tail/Turn/Backup
- 14L x 6-7/8W Inch
- Non-Submersible Lights
- Command Electronics
14" x 6-7/8" Rectangle. Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. Pre-wired design.
Features:
- Triple LED trailer light provides stop, turn, tail, and backup light function
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide better light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate base and lens
- Red and clear lens over white LEDs
- Compatible with 12V DC systems
- Mounts on surface of trailer - hardware not included
- Wire functions:
- Red: stop and turn
- White: ground
- Black: tail lights
- Purple: reverse or backup
- DOT and SAE compliant
- Meets FMVSS 108 requirements for automotive lighting
- Assembled in the USA
Specs:
- Overall dimensions: 14" long x 6-7/8" tall x 1" deep
- Quantity: 1
- 1-Year limited warranty
ET003-3000M1 Command Electronics Ultra Modern Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens
Replaces 003-30LEM2
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Defective
Ratings & Reviews
4.8
364 reviews
by:
Patrick L
11/11/2025
Perfect replacement for my 2013 Fleetwood Tioga Montara. Excellent product, excellent customer service. I look forward to purchasing more products from
etrailer.com!
etrailer.com!
by:
Gordon
06/17/2025
2016
Forest River
Forester Motorhome
Exact fit. Seem to be better quality. For the price, the company could’ve included new screws and some wire connectors.
Brooke M.
6/18/2025
That is some fair feedback, Gordon :) Really does look like an exact fit! Have been camping since installing the new light?
by:
Luiza Navarro
04/24/2025
video on product helped me to install in my Vegas 24.1
Original had 8 cables, new one 6 cables.
all 3 whites from bus went together on white from light.
each black from bus in each black from light.
each green from bus in each red from light.
red from bus on purple from light.
Original had 8 cables, new one 6 cables.
all 3 whites from bus went together on white from light.
each black from bus in each black from light.
each green from bus in each red from light.
red from bus on purple from light.
Brooke M.
4/27/2025
Thanks for sharing all that detail with the wires, Luiza! You'll be saving someone out there a ton of time :)
by:
Glen
07/14/2026
2018
Forest River
FR3 Motorhome
Loved the fact that they were a direct replacement for the tail lights that were on my motorhome. They are brighter than the original lights.
by:
Jenette
09/22/2026
2016
Coachmen
Freelander Motorhome
Perfect fit. I thought it was strange it didn’t come with the mounting screws!
by:
Gary
03/15/2024
2017
Coachmen
Freelander Motorhome
Quite easy to install and fit my Coachman Freelander perfectly. The prior ones were not sealed, filled with water, and blew the fuse fuse. Beware of the cheaper version on Amazon as they have the same poor seal problem as the original lights which died after <5 years.
Gary
3/17/2025
We have a 2019 Coachman Freelander 26DS. The prior lights were LED, but not sealed well so water got in and corroded the connections blowing the fuse when they shorted out. These lights have been on for the last year and are working out great. Easy to install and they are completely sealed to prevent what destroyed the original lights.
Jameson C.
3/17/2025
@Gary Glad these are working better than what you had before!
by:
Mary
09/02/2026
Great directions and fit perfectly on our Winnebago Sunstar Motorhome.
by:
Tim H
08/09/2024
Command Triple LED Tail Light Review
They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system.
This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow.
Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.
They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system.
This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow.
Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.
Brooke M.
8/20/2024
Thats a super informative review, Tim. Thanks for taking the time to explain all that - I am sure others will find this helpful, too!
by:
Girard
11/14/2020
Great product. Very bright compared to the OEM lights. One star taken away for no fasteners.
Does require a 30mm hole at the mounting point to clear a protrusion at the mounting surface of the light.
Wiring label on back of the light.
#6 zinc, fasteners required.
Does require a 30mm hole at the mounting point to clear a protrusion at the mounting surface of the light.
Wiring label on back of the light.
#6 zinc, fasteners required.
Girard L.
11/15/2021
Lights are holding up great. Love the bright backup Lights.
by:
James
08/09/2023
The light assemblys ordered were back ordered but shipped to me as soon as they were available. The fit was perfect. Had some problems with the wiring,the coach had 8 wires and the assy had 6. Once figured out the install went quickly. Perfect match.
James
8/13/2024
Best light system I have found and perfect fit to the existing opening in my RV.
by:
Tommy
07/03/2026
Great customer service when ordering what you need/want. Delivery was quick and these days that’s something to be proud of. Have not tried to install yet.
by:
Bobby Logan
05/08/2021
2014
Winnebago
Vista Motorhome
The tail lights are great! Customer service and quick response is excellent. The only criticism is there were no screws included and it took considerable time too find them. Otherwise five stars hands down.
Bobby L.
5/9/2022
Great! Love the tail lites!
by:
Francis
10/13/2025
These were the exact replacement for the incandescent original taillights that came on the 2012 Class C. They are bright and expense. BUT, they cracked less than a month into our trip South in the 1st qtr 2025. Called e trailer and was referred to the manufacturer. After talking to them & sending pictures, they determined that it was faulty installation would not warranty them. My response was disappointment and suggested that the manufacturer should include an installation instruction sheet (including the wiring color code- which it is printed on the plastic back of the lights) and stainless steel mounting hardware considering the higher price. Buyer beware!
by:
Tiffany
05/01/2026
Quick, Easy, reliable, priced accordingly, and all around great experience shopping at e-trailer.
by:
John
02/07/2022
This was a much needed replacement for the dated lights on our RV. Easy install, sealed well and have had no issues. I cant say how they will hold up to sunlight as I keep my RV covered when not in use but hopefully time will be in their favor.
by:
Tom
10/17/2026
2021
Thor
ACE Motorhome
Quick delivery, works great...
by:
Nelson
05/27/2022
These taillights worked out great. They are much brighter and cleaner than the original bulb light system.
by:
Paul
02/26/2026
The customer service you provide and the follow through is very refreshing!
Thank you for a job well done!
Thank you for a job well done!
by:
Patrick
11/18/2025
Old lights got water on the bulbs. These LEDs are sealed and are the exact same size. Work great and are brighter. Highly recommend.
by:
Donald
04/21/2021
Easy to install. Fished the wires up to the new trailer light
by:
John
08/04/2026
Fit and function was perfect. Shipped overnight as requested.
by:
Steve
07/11/2021
2014
Thor
Four Winds Motorhome
Awesome product easy install no drilling perfect fit. Wiring these light up very nice easy to do. The clarity of these lights are awesome in the night people can see the back of the coach lit up nicely. Great product.
by:
Dennis
09/27/2024
Great product! Well made, easy to install and looks fantastic. Fast shipping and responsive service. Highly recommend!
by:
Karen
03/27/2025
This is a little more delicate that I thought, but looks and works great. We viewed the video on the wiring, so thank you for that as well as the light. We have it mounted on the rear of our bike rack, for our e-bikes. The bikes partially obstruct the trucks rear lights, so works great.
Brooke M.
3/27/2025
You're very welcome -- so glad to know the videos actually help our neighbors :) Sounds like this light was right on the money for your needs. Thanks, Karen!
by:
Stan
10/09/2025
Joshua was extremely helpful & knowledgeable in assisting my Husband with the proper light needed for our motorhome.
Thank you, Joshua, it was a real pleasure talking with you. Have a great day!
Thank you, Joshua, it was a real pleasure talking with you. Have a great day!
25
364
true
Show More Reviews
See what our Experts say about this Command Electronics Trailer Lights
- Possible Light Replacement For Monarch 5129 On 1977 Great Divide TrailerThanks for the picture! The closest replacement we have for your Monarch 5129 Lights on your trailer is the Triple LED # CE44VR. This light measures 14" x 6-7/8" so it should completely cover your old mounting holes, though it's going to take some work and DIYing to get this fit. I'd make sure to seal all the way around the light with some non-sag sealant # AL63KV that way you don't get any water inside of your trailer.
view full answer...
- Is There Clear Lens Version of the Triple LED Trailer Tail Light # CE44VRHey Celia, we only have the version of the part # CE44VR that you found that has the lens red. Trailer lighting doesn't get quite as creative as vehicle lighting where you will see the clear lenses and red bulbs underneath. Is it just an aesthetic thing?
view full answer... - Replacement 14 x 7 Triple Tail Light Recommendation for RVHey Bryant, thanks for reaching out! The closest tail light we have to what you're looking for is the Triple LED Trailer Tail Light # CE44VR. This has roughly the same dimensions, but the screw holes are spaced out differently (about 6-1/2" on center) so you'll need to take that into account.
view full answer... - Are Load Resistors Needed with the Triple LED Trailer Tail Light # CE44VRHey Lyall, so the triple LED trailer taillight part # CE44VR is a great choice for your motorhome but it would cause hyperflashing since it's LED and what you have isn't. So what that means is you will need a load resistor setup like you mentioned. The best way to figure out what you'll need is by using the bulb type of the turn signal circuits that are on your vehicle. It turns out that not all load resistors work for all applications and if you search for "load resistor harness" plus...
view full answer... - Replacement Taillight Lens for 2015 Thor VegasHey Michael, I looked up pictures of your 2015 Thor Vegas and it looks like it has the Command Electronics trailer taillights like the part # CE44VR so for replacement lenses you'd need the part # 328-89-230L and the part # 328-89-231CL. If you have different taillights you'd need to send me a picture so I could ID them.
view full answer... - Replacement LED Light for the Command 003-30Yes, it will and hello! The Triple LED Trailer Tail Light item # CE44VR is the direct replacement for the older Command 003-30. It's got the upgrade LED's along with a better seal.
view full answer... - Replacement Tail Lights for 2016 Forest River FR3 Class AI don't believe they're considered true OEM replacement tail lights for your Class A, but I do know that some of our neighbors have successfully used the Triple LED Trailer Tail Light # CE44VR on their RVs. You'll want to confirm that the hole size from your old lights is smaller than the new lights so there's room to mount the new lights. Since these are LED lights, if you're replacing incandescent lights, then you'll also need some load resistors like the # DI34ZR. The other light we've...
view full answer...
- Wiring Installation on Command Electronics Triple LED Trailer Tail LightThe Command Electronics Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1 # CE44VR does not come with any instructions but the wiring diagram can be found on the rear of the lens housing if you pull back the foam pad. We've also covered this in detail in our review video, which I've attached to this answer and outlined below. Red- stop and turn White- Ground Black- Tail Lights Purple- Reverse/Backup
view full answer... - How To Find Correct Replacement Taillight for Winnebago Minnie WinnieThe Triple LED Trailer Tail Light part # CE44VR is a pretty common OEM taillight used on motorhomes so as long as the style is the same as the one you have and the dimensions of 14" long x 6-7/8" tall x 1" deep are the same it should work great as a replacement. Unfortunately, we can't cross-reference Winnebago part numbers but they may be able to give you the taillight manufacturer part number and in which case we could then likely confirm.
view full answer... - Replacement Tail Light for a 2019 Coachmen Freelander 21QB MotorhomeThanks for reaching out, Wendell! According to my research the Triple LED Trailer Tail Light # CE44VR looks very similar to what comes on your 2019 Coachmen Freelander 21QB. As long as the 14" long x 6-7/8" tall x 1" deep dimensions match what you have then you'll be able to use this on your motorhome!
view full answer...
- Replacement 003-30 Tail Light For A 2019 Coachmen Freelander The four corner mounting screws of the Triple LED Trailer Tail Light # CE44VR are spaced 13" x 5-7/8" apart. From what I can see the 003-30 mounting holes look to be spaced the same so you shouldn't have to drill new holes to mount the light. If you wanted to confirm for sure you can measure the mounting holes on your light and if you find a different spacing then let me know and I can see if there might be a option that would be a direct match.
view full answer... - Replacement Taillight For 2018 Thor Chateau 31W MotorhomeThe Triple LED Trailer Tail Light # CE44VR does appear to be the same one that came on your 2018 Thor Chateau 31W. I do always recommend verifying replacement parts with your originals as I have personally seen identical campers have different parts installed from the factory due to shortages. This light is 14" long, 6-7/8" tall, and 1" deep. The mounting holes are in a 13" by 5-7/8" rectangle. I have linked an image with these dimensions marked. Hardware is not included as different...
view full answer... - Finding Replacement Taillight for Winnebago 183787-01-CHTWe have had other customers in the past replace their Winnebago lights with the # CE44VR. However, I'm unable to cross-reference that part number to be able to make a direct comparison. The only information I could find is that the 183787-01-CHT is also a triple tail light. I recommend comparing the dimensions which are 14" long x 6-7/8" tall x 1" deep. If this matches what you have these would be a good replacement.
view full answer... - Replacement Taillight for 2016 Winnebago Winnie Mini Class CI pulled up pictures of your 2016 Winnebago Mini Winnie Class C and the taillights it has are the exact same as the Triple LED Trailer Tail Light # CE44VR so it would work great for you.
view full answer... - Wiring Functions of Command Electronics Triple LED Tail Light for 2017 Winnebago Vista LX 27NSince they are on the same circuit, you will want to switch the running lights to LED as well when installing the # CE44VR. Mixing the two has a tendency to cause problems with the lights functioning, and it is definitely important to have working lights on your motorhome. As far as the wires go, this light has 6 wires coming out of the back. The red wires are stop and turn signals, the black are the running light/tail light, the purple is the reverse light, and the white is the ground....
view full answer... - Option For Replacing A Bargman 34-84-527 #84 Double Red Tail Light With Black BaseI do have a potential option for replacing your Bargman 34-84-527 taillights, although we do not carry a direct replacement, as they are no longer available. What we have is the Bargman # 30-84-008 tail light. This is a very similar #84 double red incandescent light with a black base. It will be identical in size to your current lights at 9-13/16" long x 6-15/16" wide. The only noteworthy difference is that on the Bargman # 30-84-008, one of the lenses has a small clear section in the middle,...
view full answer...
- LED Still Flashes With Turn Signals While Using Pacer Performance 3rd Brake Light Logic ModuleThe Pacer Performance 3rd Brake Light Logic Module part # PP20-702 is your best option to isolate the brake signal from the turn signal for a third brake light. However, the issue that you are experiencing is that some LEDs simply don't draw enough power for the logic module to recognize a light is on therefore does not function correctly. The Curt 2-To-3-Wire Tail Light Converter part # C56196 is not a good option either because according to Curt you must hook up both sides in order for...
view full answer... - Wire Functions of Triple LED Trailer Tail Light CE44VRWhile we wouldn't have any way of knowing what the 8 wires are for with your current light, I can tell you the functions of each wire for the Triple LED Trailer Tail Light # CE44VR. Then what you would need to do is match those wires with the correct ones on your RV, and you can find out what wires are for what function on your RV by using a circuit tester like the Cordless Circuit Tester # PTW2979. After that it would just be a matter of matching the wires by function (and not color),...
view full answer... - Dimensions of Command CE44VR Trailer LampI've linked to a diagram showing the dimensions of the Command # CE44VR trailer lamp. We don't have a video completed as of yet, but when we do, it'll appear on the website.
view full answer... - Does Triple LED Command Electronics Tail Light Require Load Resistors on RV Since your RV currently has incandescent lights and you're going to be replacing them with Triple LED # CE44VR you will need to add resistors like the Putco LED Light Bulb Load-Resistors - Aluminum - Qty 2 Item # P230004A-2 to the turn signal circuits. This will keep your blinker from hyper-flashing and allow them to function normally.
view full answer... - Which is Brighter RV Taillight Command or Diamond Trailer TaillightsHey Tom, all of the lights you mentioned are bright and will easily be visible but the Command # CE44VR is the brightest compared to the part # DG52721PB and # DG52720PB.
view full answer... - Replacement Tail Light for a 2011 Thor Freedom-EliteLooking at the lights for the 2011 Thor Freedom-Elite, we don't have a replacement lens that matches the design. The closest thing we have is a replacement light that features the 3-function lenses that looks very similar to yours. It's the Triple LED Trailer Tail Light, part # CE44VR. It's a rectangular light with 3 circles inside (two red on the ends and one clear in the middle). The light measures 14" x 6-7/8", so you will want to ensure that these dimensions match yours. I've linked...
view full answer... - How To Install Triple LED Trailer Tail Light on 2018 Coachmen Highlander With 8 WiresSince you already watched the video I'm sure you know the functions of each wire on the # CE44VR but I will go ahead and cover them again. The red wires are stop and turn signals, the black is the running light/tail light, the purple is the reverse light and the white is for ground. Since we have no way of knowing the functions of the 8 wires on your 2018 Coachmen Highlander you will have to test to find out. You can use a circuit tester like the # PTW2979. Once you finish testing you...
view full answer... - Gasket Availability For Command Electronics LED Triple Tail LightUnfortunately we do not carry the gasket for the Replacement Red Lens for Command Electronics LED Triple Tail Light # 328-89-230L. If your lights are not working or have been damaged, another option is to replace the light assembly. The Triple LED Trailer Tail Light # CE44VR is the same design but uses leds rather than incandescent bulbs. So it will last much longer, and there are no bulbs to replace. They do come as a single unit, so if you need one for both sides of your trailer you...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Kathleen M
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Amanda K
Edited by:
Daron K
Written by:
Brian T
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
11/18/2025
Glad to hear it fit so well, Patrick! And thanks for the kind words! We do our best to take care of people and it's always to hear we are doing a good job. ^___^ Did the original get damaged or just quit working?