Arrives before Christmas 
You're loaded down with bikes, lumber, or a side-by-side caked in last weekend's mud. Doesn't matter. You've got the right hitch and no reason to second-guess it. Swapping trailers tomorrow? Flip the ball over and get back to work.
This hitch doesn't mess around. With a 14,000 lb rating on the 2-5/16" ball and 10,000 lbs on the 2", it handles most big trailer jobs with ease. And because it's made from lightweight aluminum with stainless steel balls, you get the strength without the bulk. Easier to handle. Built to pull hard and stay looking sharp.
This version gives you 4" of drop or rise, which hits the sweet spot for many lifted trucks or taller trailers. No setup headaches. Just the right height to keep your trailer level and your rig stable.
Flip the stainless-steel ball platform and you're ready to switch trailers. Secure pins keep it locked in, and the adjustment holes are clean and tight. No slop. No extra hardware. Just set it and go.
Forget flaky paint or corrosion creeping in. The aluminum shank resists rust, and the stainless balls don't rust out or gum up no matter how nasty the road gets. Even the pins are stainless, so you're not hunting replacements after one salty winter.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer.com. Let's take a look at our Bulletproof hitches stainless adjustable two ball ball mount. It's a two and a half inch shank and it's got a four inch riser drop available, rated at 14,000 pounds capacity. So folks, this is an aluminum ball mount with dual stainless steel balls that lets you hook up your trailer to your tow vehicle. You have a two and five sixteenths and a two inch.
The two and five sixteenths is rated at 14,000 pounds capacity, while the two is only rated at 10,000 pounds capacity. And again, folks, the nice stainless steel with the loon just looks really good, but it's also gonna last for years and years to come. It's a polished aluminum. You don't have to worry about rust, corrosion on any of these two metals, and they're gonna work great together. the way they've designed it.
As you can see, you've got two pin and clips and two pins here with nice ergonomic holds. And that's how you would simply pull the pin, remove the two main pins, and then you'll be able to change that ball number one. So I can slide this up and off and flip it over and then go with maybe a two inch ball instead. Or if I want to invert the whole thing, then I can change it over and do a rise position if I so choose as well. But I'm gonna go ahead and put it back in the drop here just for demonstration and just to help it balance on the table here today.
(metal clanking) And then again, your two clips are, go right back into those two pins. And as we all know, these are hard to get in, especially when they're brand new. So you just kind of have to wiggle 'em, work with 'em, and get 'em back into place. There we go, there's the first one. Now as you can see, there is no hitch pin included that's sold separately.
I recommend you invest in a lockable hitch pin. Both of these holes are your standard five eighth inch holes for the hitch pin. Again, not included, sold separately. And again folks, this is just a great option if you have a two and a half inch hitch, this two and a half by two and a half inch shank, will slide right in there. Bulletproof, as you know is made here in the US, great American product, great quality, you're not gonna be disappointed. Well folks, I think that will wrap it up for our quick look together. I'm Steven, as always, if you have questions about this or any of our great products here at etrailer.com, reach out to us. We'll be happy to assist you, have a good one.
Beautiful
high quality - great service
Very nicely built hitch. Highly recommend these!
Great and lightweight
Top notch product and Lauren made sure I was well taken care of !….Highly recommend !
product seems well made lighter then the one made from steel i had it was very heavy thats why i bought it good product
Incredible quality. It’s so beautifully made I hate to use it for towing!
This thing is a TANK. Look forward to putting it on the Sprinter Van for some adventures.
The hitch is well made. The 6” drop works great for hooking up trailers.
Beautiful hitch!!! My Boyfriend loves i t!!!
Definitely high quality a little pricey but you get what you payed for
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.