We'll connect you with nearby partnered installers who know this exact setup.

Roadmaster

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

Part Number: 1018-1

2218 Reviews | 3 Questions

In Stock

$670.00

Retail:$742.50

You Save: $72.50

Not Confirmed to Fit

2006 Smart Fortwo

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Partially Hidden 1018-1

Tow Bar Base Plate 1018-1 - Partially Hidden - Roadmaster

1018-1 - Partially Hidden Roadmaster Removable Draw Bars

Show All (6) Product Images

Show Fewer Product Images

In Use/Installed

Tow Bar Base Plate 1018-1 - Hitch Pin Attachment - Roadmaster

1018-1 - Partially Hidden Roadmaster Tow Bar Base Plate

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Hitch Pin Attachment 1018-1

Roadmaster Hitch Pin Attachment Tow Bar Base Plate - 1018-1

Show All (6) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms customer photo

Show All (3) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing. Great Prices for the best tow bar base plate from Roadmaster. Roadmaster Crossbar-Style Base Plate Kit - Removable Arms part number 1018-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (2218)
Q & A (0)
Related Parts
Photos

Roadmaster Tow Bar Base Plate - 1018-1

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Ready for Flat Towing: Provides secure connection points so you can safely tow behind your RV.
Blends In When Not Towing: Removable drawbars leave hidden brackets for a clean, factory look.
Built to Last: Computer-cut, all-steel construction with black powder coat resists corrosion.
Simple to Set Up: Drawbars attach and remove easily with hitch pins—no welding required.
Reliable Fitment: Custom base plates match your vehicle’s frame for consistent alignment.

Features to know about

Made for a Clean Front End: Hidden Brackets with Removable Arms

When you’re not towing, you still want your vehicle to look sharp. This base plate’s hidden bracket design keeps things clean and out of sight, with drawbars that remove easily using two hitch pins. Once the square drawbars are off, the remaining brackets are virtually invisible and tucked inside the grille—protected from scrapes and scuffs so the front end keeps its factory look.

Built Strong for the Long Haul: All-Steel, Computer-Cut Construction

Towing puts a lot of stress on your setup, but this kit is built to take it. The base plate uses computer-cut, all-steel construction for exceptional strength and precise fitment. A black powder coat finish adds durability and corrosion resistance, so you can trust it to handle miles of road time without worry.

Simple, No-Weld Setup: Bolt-On Fit with Included Hardware

You don’t need a welder or fabrication tools to get this mounted. The base plates are custom-fit for a perfect alignment to your frame and bolt on cleanly with the included hardware. Clear instructions make it straightforward for anyone setting up their own flat-towing system at home or in the shop.

Ready for Your Existing Tow Rig: Compatible with Roadmaster Crossbar Systems

If you already have a Roadmaster tow bar, this kit fits right in. It’s compatible when used with the quick-disconnect crossbar (910021-00 – sold separately). That connection keeps your towing gear consistent across setups while giving you confidence in a matched system that’s proven to work together.

Solid Value That Lasts: Reliable Performance Over Time

Once installed, you can count on this setup to stay put and perform trip after trip. Its sturdy build spreads towing forces evenly across the chassis and reduces wear over time. Whether you’re towing occasionally or logging thousands of miles, the consistent performance makes it one less component to worry about on the road.

Specs

Weight

Shipping weight: 44 lbs

Construction and Design

Bracket design: Hidden
Drawbars: Easily removable via 2 pins
Construction: Computer-cut, all-steel
Finish: Black powder coat finish is durable and corrosion resistant
Attachment features: Removable Draw Bars, Hitch Pin Attachment
Visibility: Partially Hidden when installed
Fitment: Custom base plates ensure a perfect fit for your vehicle

Compatibility

Tow bar compatibility: Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 - sold separately)
Vehicle fit: 2006 - 2008 Suzuki Grand Vitara

Installation and Included Components

Installation type: Simple installation - no welding required
Included components: Instructions and mounting hardware included

Origin and Warranty

Manufactured in: USA
Warranty: Limited Lifetime Warranty

1018-1 Road Master XL Base Plate Kit

Installation Details 1018-1 Installation instructions

This Product Fits The Following Vehicles

2006 - 2008 Suzuki Grand Vitara

4.8

2218 reviews

5 Stars		(1870)
4 Stars		(262)
3 Stars		(48)
2 Stars		(13)
1 Star		(25)

by: Tony D 11/29/2021

fitted perfectly, just what you want when you make a purchase to ship to Australia

Click to Enlarge

by: Malinda 02/10/2021 One Year Later

Instructions to install were so detailed even I could do it. Alignment of bolt holes was almost exact. Has quite a few thousand miles towing and works great. Had to cut out some of the plastic grill to mount “umbilical cord” and breakaway switch, but the Leatherman saw made that easy.

etrailer, as usual, had great service and friendly staff. Don’t usually look anywhere else for stuff they carry.

by: Walter O.. 06/09/2016

2008 Suzuki Grand Vitara

The tow bar adapter kit came late as it had to be ordered from the factory which
was not really a problem as I was gone on vacation, but a representative from
etrailer was in contact with me keeping me informed.
The item fit perfect and had really good instructions went on with out a problem
and is very sturdy and well built. would buy from them again

by: Morris 12/17/2020 One Year Later

by: Bruce A 07/02/2026 One Year Later

Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.

Click to Enlarge

Claire H.

7/6/2026

It really is invisible! It took me a second to even find the base plates in your photo!

by: Christian 05/13/2026

1995 Jeep Grand Cherokee

Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.

Click to Enlarge

Kate F.

5/14/2026

Thanks for the review and for sharing your installation experience Christian. Your tip about leaving the bumper on during install is really helpful, especially since fitting the ends through the louvers can take a little extra maneuvering. It’s also great to hear the setup works well with your Stowmaster 5000. The install looks great, and we appreciate you sharing the picture! Where did you go for the first trip?

Christian

5/20/2026

@KateF Hudson Parcher County park in Rainier, OR

Kate F.

5/21/2026

@Christian I just looked it up, looks like quite the magical place! Thanks for sharing =)

by: Robert 01/06/2025

Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.

Click to Enlarge

Robert One Year Later

1/7/2026

Everything related to my Mini towing system is working great after a year of use.i do wish I had bought a cover for the tow bar though. Keeping it clean would be easier with the cover. Great products and service from etrailet

by: Robin 11/21/2024

The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier

Click to Enlarge

Robin One Year Later

11/25/2025

Working great these are durable tow bars Have no problems with them easy to hook up and tows vehicle without no problems .

by: Charlevoixboy 12/10/2025

2007 honda Element

Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!

Click to Enlarge

by: Michael 12/03/2025 One Year Later

2004 Subaru Impreza

We towed our 2004 Subaru Impreza WRX STI 3000 miles last year, this is an ideal setup, discreet when not in use, solid, and easy to get on/off. Very please with the support I received from Roadmaster as one of the bolt was missing, was sent super quickly.

Click to Enlarge

by: James 07/02/2025 One Year Later

Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.

James One Year Later

7/3/2026

New system working fine. As with previous system it requires towed vehicle to be nearly perfectly aligned straight behind motorhome to disconnect without considerable tension.

by: David 05/23/2025

The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.

David One Year Later

5/24/2026

It continues to work flawlessly

by: Steven 08/09/2026

Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!

by: Thomas 07/29/2026

2015 Chevrolet Equinox

Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)

Christopher H.

8/4/2026

Thanks for you feedback Thomas! Sounds like the install went smooth. Hope you have a great summer!

by: Larry 05/05/2026 One Year Later

I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.

Claire H.

5/7/2026

Thank you so much for the kind words and being a repeat customer with us! We look forward to helping you out with all your future adventures!

by: Brad 06/22/2026

After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.

by: Julie 05/30/2025 One Year Later

Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.

Click to Enlarge

by: Mike 08/16/2026

Install pretty easy. You will have to change directions of one bolt due to obstruction ( frame). Cannot torque a few of the bolts. These are the ones with wire attached.
Rock guard needed addition trimming from factory instructions.

by: Wesley 07/08/2026

The representative (Sarah) was very helpful and knowledgeable, the prices are very reasonable and all my items arrived on time. When I called with a question, she was very polite, friendly and genuinely sounded like she enjoyed her job. When I discovered one of the items I ordered wasn’t needed, getting help to return was hassle free. I would recommend etrailer to anyone that needs anything RV or trailer related. I will definitely do business with them again. I am impressed.

by: Todd MobileRVHelp 06/02/2026

2022 Chevrolet Trax

Not an easy install on a Trax but it is very well made and gives a clean look. I did customize by cutting down the 6 pin bracket supports to get it flush with front of the car.

by: Rob 01/19/2019 One Year Later

2019 Chevrolet Equinox

The Jeep project went very well everything fit great and worked well. I really love Roadmaster products and quality and your company is the best place to purchase them. I sold the Jeep and replaced it with a new 2019 Chevy Equinox 2.0 L AWD and just purchased and installed the following items from you and installed them, RM-156-25 & RM-156-75 Battery Charge Line Kit, RM-146-7 Flex Coil Kit, RM-523193-4 EZ4 Plate Kit, RM-88333 Custom Seat Adapter, RM-751489 Stop Light Switch Kit and a RM-98160 Second Vehicle Brake Kit w/brakeaway. All these parts were in stock and arrived quickly and normal with you people, I really enjoy the o-line vidios as I do all my own installs. Thank you so much for your great service.
I will attach pictures of my install, you will see how I was able to fab a bracket and attach it to the existing mount on the base plate to mount the brakeaway switch and the air connection for the brake system.
I also fabricated a tail light bar as I didn't want to use mag-lights or splice into the factory lights and bulbs installed into the lights would not work as the factory brake lights will come on when the brake system is applyed and the turn siginals would not be visable.
Thanks for all you do, I would and do recommend you people to everyone who needs your products. Rob

Click to Enlarge

Rob One Year Later

1/21/2020

Everything is working great, I installed a base plate kit, battery charging kit, stop light switch kit, second vehicle air brake kit w brakeaway and seat adapter on our 2019 Chevy Equinox and towed it about 14000 miles behind our motor home this past year and everything worked perfect not a problem with any product. These are great products, everything fit perfectly and performed perfectly. Thank you for great service and great products. Rob

by: Chris 03/15/2019

2015 Subaru Outback Wagon

This was the second base plate kit from etrailer that I have installed, the first being on our ‘03 Outback and this one on our new to us 2015 Subaru CrossTrek. As usual the response, shipping and delivery from etrailer was prompt and curious. They are my go to place for anything towing related.
Installation of this kit went well with only a few issues, most of which were related to our vehicle not the kit. I knew the car had been hit lightly on the LF corner, but could find nothing of concern body or frame wise when I looked the car over before buying it. Turns out the front bumper reinforcement had been tweaked a tad which made lining the bolt holes up with the holes in the base plates a tad challenging. This made the small angle brackets that go inside the frame heads tough to line up, but in the end it all fit. I did find that it was unnecessary to pull the washer reservoir or the left headlight to access the nut and washer for the long 1/2” bolt. You can easily reach and see the place from underneath after pulling the plastic encapsulation panel. When drilling that 1/2” hole be sure to angle the drill bit UP a tad otherwise you may end up having to grind a flat on the side of the large, thick washer as you can see in my picture from underneath. I used shrink wrap over the nut and bolt since there’s a wiring harness right against it. The picture of the baseplate differs a bit from the pictures so I guess they made some changes. All in all a great kit!

Click to Enlarge

Chris One Year Later

3/16/2020

It’s been a year now and probably 7,000 miles later and everything has held up perfectly despite some darn rough roads between MD and Albuquerque, NM and back.

by: Bill F 10/16/2015

2012 Fiat Sport

After comparing Demco, RoadMaster, and Blue Ox base plate costs, mounting procedures, etc for my 2012 Fiat Sport, I decided to go with RoadMaster (Kit #522013-1A) for two main reasons: 1) I had the tow bar and mount adapters from another product that were the same specs as the RoadMaster tow bar and adapters to attach to the base plate, and 2) no drilling or other modifications required to mount the base plates. Blue Ox (Kit #BX2800) required I buy their tow bar and other unique configuration adapters PLUS drill two half-inch holes on either side where the base plate mounted AND hammering flat the tips on the corners of the bumper bracket the frame where the base plate mounted. Blue Ox did provide better details on the removal of the facia and bolt removal and torquing actions required for the Fiat. My biggest challenge was the removal of the facia without damaging the clips or other damage to it. Once it was off, the action of removing the bumper core from the end of the frame rails and bolting on the base plate was slick! I took a little over 4 hours to do this, but it was because I wanted to do it right, without damage, and have the confidence I could tow without issues. (Not sure how sequence will show, but labeled the pictures as "Before," "Removal," "Installation," "Finished," and "Ready to Tow.")

Click to Enlarge

Bill F. One Year Later

10/15/2016

Hate that every 3,000 miles towing have to re-torque bolts of base plate. Good product otherwise.

Rachael H.

10/18/2016

Thanks for the feedback Bill. You bring up a very good point, I am sure it is pain, but it is specified in the instructions.

by: Billy 09/17/2026

It looks easy to install. I haven’t yet. The brackets look awesome.

by: Bob T. 04/20/2014

2014 Jeep Wrangler

Great product for my 2014 Wrangler. Good materials, solid attachment to vehicle, and looks good. The e trailer installation video was great for assisting installation. Made the install much quicker and easier. The most difficult procedure for me was disconnecting the wiring harness on the back of the bumper. An old tack puller (or tool of similar design) would have been great for leveraging the pins out of their holes. Cutting the air dam was a slow process to ensure I didn't cut too much. A paper template to mark where to cut the air dam would make this process much simpler. Again, I can't emphasize enough how great the installation video was for making the steps easier.

Click to Enlarge

Bob T. One Year Later

4/20/2015

This item works great. Have towed about 4500 miles using it. I couldnt be happier with the results.

2218

true

Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Base Plate

Do you have a question about this Tow Bar Base Plate?

Parts Needed to Flat Tow a 2006 Suzuki Grand Vitara
Sounds like you are looking for a way to flat tow your 2006 Suzuki Grand Vitara. You would need a base plate kit for that since there is no way I can recommend you flat tow your vehicle using the pull rings on the front of your car. For that you would need the part # 1018-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For...
view full answer...
Additional Components Needed to Flat Tow 2014 Subaru XV Crosstrek with Roadmaster Sterling Tow Bar
The five basic components required for flat towing are a tow bar, safety cables, wiring or lighting, base plates for the towed vehicle and a supplementary braking system. All of these items are explained in detail in the linked article. Some vehicles will require specific preparation steps to make them ready for towing and some even require addition of items such as a transmission lube pump so it is important to check the owner's manual for your 2014 Subaru XV Crosstrek. You'll want to...
view full answer...
Shipping Weight of Roadmaster 1018-1 Base Plate Kit for 2007 Suzuki Grand Vitara
Absolutely! The Roadmaster # 1018-1 base plate kit has a shipping weight of 44 lbs, and is a fit for the 2006 - 2008 Suzuki Grand Vitara. I've linked to some articles about flat towing that you might find helpful.
view full answer...

Do you have a question about this Tow Bar Base Plate?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Jameson C

Written by:

Lindsey S

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Mike S

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.