To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Rain, heat, or snow—this cover is built to handle it all. The RetraxONE XR uses a one-piece Lexan polycarbonate shell reinforced by 5/8" thick aluminum I-beams spaced every 4-3/4" for serious impact strength. It won’t crack in sub-zero cold or bubble in the heat, performing from -50° F to 200° F without warping. Its matte black finish resists scratches and UV fading, keeping the cover looking clean and sleek even after years of exposure.
When you need to load tall gear or oversized cargo, the manual retractable design slides open easily using sealed ball-bearing rollers—no pull straps, snaps, or springs to fight with. The cover rolls into a compact 13-1/2" deep x 12" tall canister that tucks neatly against the bulkhead, leaving more room for your cargo. Because there are no hinges or joints to trap dirt or freeze up, operation stays smooth in any season and never needs lubrication.
Whether you’re protecting tools or weekend gear, the locking pop-up handle keeps everything out of sight and safe. You can lock the cover at any point along the rails to secure smaller items at the front while leaving space for long cargo near the tailgate. When closed and latched with your tailgate locked, the solid surface design resists prying and cutting far better than soft covers. A flat weather-guarded lid shields the keyhole from dirt and moisture so the lock stays reliable over time.
Built right into the side rails are accessory T-slots that let you add compatible ladder racks or crossbars (sold separately) from brands like Thule, Yakima, or Rhino-Rack. This setup lets you haul bikes, kayaks, or rooftop gear above your truck bed while keeping it sealed below. The T-slot system doesn’t interfere with cover movement, giving you full flexibility to open or close the tonneau anytime.
The rails sit just 1" above the bed for a streamlined look that blends with your truck’s lines while improving aerodynamics for better fuel efficiency when closed. Installation is straight-forward—no drilling required. The rails clamp on with included hardware, and drain tubes route through existing bed holes to channel water out of the canister. It’s a tough, low-maintenance cover that adds function without cluttering up your truck’s style.
Ratings & Reviews
Looks good and feels sturdy
Awesome product as it was easy to insta ll!
Still works great. Been outside in the elements for a year. Looks and functions great.
The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].
I'd have a conversation with the delivery company if I were y'all.
perfect fit. solid build. Fast shipping
Product very good. Drain plugs could fit better keeps popping out
Installation went well. Quality workman ship.
I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.
Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.
Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.
Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.
The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.
Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.
Very good quality tonneau cover and it just glides when opening and closing. Installation was super easy too.
etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!
Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.
Pretty decent cover and installation was reasonable. I’m still not sure how water resistant it will be but we will see. It is replacing a folding cover and thus far it is easier to use. I’ll have to see if it is worth the space trade off but I didn’t like the rear window being blocked when the folding cover was open.
Everybody at etrailer have always provided excellent customer service. Thank You,
So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.
The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.
Great accessory for our F-150. Installation isn't too bad if you just take it slow and double-check everything as you go. Looks are top-notch, and the functionality has been excellent. Gives us an extra sense of security being able to lock the cover when needed. You lose a small amount of bed space, but so far it hasn't caused any problems for us. Did I mention it looks great?
E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw
Piece of junk. It ripples in the wind like a tarp over the back of the pickup. The canister does not roll up without having to be forced it in, mostly due to the ripples from driving down the highway. 2 stars because it could work well, the parts and design, if the actual cover were designed for the use it is intended for.
I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.