To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This cover is made to work with your existing 19"–21" over-the-rail toolbox. It sits 1-1/2" above the bed for a clean look and fits neatly behind the box without blocking access. The special header bar forms a tight seal between the toolbox and bed cover, so rain, snow, and dirt stay out while both your tailgate and toolbox remain fully functional.
When you need the whole bed, just roll it up. The soft vinyl cover peels back easily along the hook-and-loop sides and stores securely behind your toolbox with premium straps and clips. The black powder coated aluminum bows keep it supported as it rolls, so it’s quick to open or close without removing anything from the truck.
Once closed, this system automatically engages two locks—one on each side—for solid security. Combine it with a locking tailgate for a sealed, tamper-resistant bed. Opening is simple too: just pull the release cord for one-hand operation.
The double-coated vinyl stays flexible down to -40°F and won’t shrink or fade in harsh sun. Paired with the Element weather seal at the toolbox and a reinforced vinyl flap at the tailgate, it helps keep rain, snow, and debris out. The contoured aluminum rails resist rust, keeping the cover tight and durable through any season.
Turn the XT-Dial tension adjuster to fine-tune the fit—no tools needed. The Tight Bite clamps grab onto integrated rail ridges for a firm hold inside your bed rails, leaving stake pockets open for racks or tie-downs. Everything installs cleanly without drilling, giving you a secure setup that’s ready to work.
Alternate Instructions
Ratings & Reviews
Order rec’d promptly, fit is very good, easy installation, product looks great on my truck.
Love it! Love to see a hard top that fit with my box. Until then this will work just fine
2015 GMC 8'Body.Great to have a cover compatible with a toolbox. I can keep items secure and out of sight. Looks great on the truck.
Great service. Arrived on time. Easy to install
Real nice and easy to install.
Well I cannot rate the product. But UPS did a 5 star job of delivering it to my door in 5 below temps. Until it melts out there, I am not going out.
We love this tonneau cover! This is our third purchase of the same cover. We upgraded to a 2024 Dodge Ram and unfortunately needed the new fit. This is easy to install and wears extremely well. Our old tonneau cover purchased 3 years ago looks literally brand new. I am grateful that this company makes an affordable solution to covering the bed of your pickup and allowing for a toolbox as well.
This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.
Overall, Happy with this product. Relatively easy to install, however, I recommend doing it with a partner to make it easier. Fits great with my Weather Guard toolbox and gives the truck a great look overall! Super easy to open and close and provides way more security than having the bed open for all to see.
Descent cover. Easy install
I've been looking for years for a cover to fit my bed with the toolbox and all I ever heard was they don't make them. I love this cover and thanks etrailer. I was a little confused with the instructions provide, so it was a combination between the video and instructions that helped me complete the task. I really recommend if your in the market for this kind of tonneau cover.
happy with the results they all where not installed yet but measured the pieces and they and were all within tolerance went to Home Depot and bought some weather stripping as the tool box (huskie) WILL HAVE TO BE FARTHER out so you can open it full without hitting the rear window and still have a water tight seal
Surprised by the early delivery! Installation instructions need some help, but the product is just what I wanted for our '20 F350 DRW.
Cover has lived up to expectations. Easy to install. I integrated it with a 5th wheel tool box which conveniently allows separate access to either. Protects my hitch from the elements when I am not towing. Easily rolls up and down. When rolled up, it does not block my rear view when I hitch my 5th wheel. Stays securely fastens when closed. No water intrusion, even in a car wash. Every couple of months I apply a good coating of a quality vinyl UV protectant.
The measurements were a little off for the gap of the tailgate and I had to readjust after install of the side rails. Also there were some cuts after pieces were painted it looked like. Unsure if this was done to adjust a common part to make work for several different bed styles or what. Still needs a few adjustments on my part but overall am happy with it.
Directions could of been a little better as well but I was able to fumble through.
I like the design of the Tonneau cover and how it looks, the ease of installation and the follow up support of etrailer. The shipping was pretty fast but there was a portion on one of the side rails that should not have passed quality control at the manufacture. I contacted etrailer, sent in a few pictures of the damaged rail and within a few days got a replacement rail shipped to me. That’s why I like doing business with etrailer!
The cover fits well over the truck bed and snug against the tool box. RAM 3500 with 8' bed.
Installed on a 2013 F150 with 6-1/2' foot bed. I had already installed a toolbox across the bed rails and then decided to add an Access cover since I knew I could get this tool box compatible version. I had an Access cover on a previous truck and knew I wanted the same brand again.
Plan on buying additional bulb weather stripping as the cap between the tool box and the front of the bed is wide depending on tool box width. My gap was wider than what came with the installation kit. You have to put the toolbox exactly where it needs to meet the bed cover header.
Installation was easy for the cover as the struggle was getting the toolbox weather stripping installed. I put the bulb seal in the kit on the front of the toolbox and then added my larger bulb weather stripping onto the front of the truck bed so that both mated up once the toolbox was put back into place per the instructions. Any local parts store should carry the seal material.
I do like how you need to open the tailgate to operate the latching system. If you lock your tailgate, it cannot be accessed. My previous Access cover had a push button you could use to unlatch the cover with the tailgate closed. Not great if you want to keep other out of your truck bed.
After a little over a year, this tonneau cover is still working great and is a perfect fit with my crossover toolbox.
Instructions were a bit vague but I figured it out.
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
Wow, this Tonneau roll up bed cover is absolutely great. I like the quality of all parts, ease of installation and finally the look! Installed on my 2016 Ford F250 Super Duty.
This tonneau cover is great! It fits and looks perfect. The quality seems very good and should last a very long time.
The tonneau fit really well and worked with my Silverado. However, customer service is one star at best. I sent pictures to a representative of my truck and toolbox and she said the tonneau I picked out for him would not work with my toolbox. She then recommended another tonneau that she said was made for my toolbox and truck (I pull a fifth wheel so that made things difficult.) I ordered the one she recommended but it didn’t work either. I emailed her and nothing but crickets. I got an email from a different representative asking how things went and I explained the whole mess and again, nothing but crickets. I had to really get creative to get it to work and now it does, but it’s tricky getting in the tool box. Disappointing to say the least. I’ve ordered from etrailer before and had good experiences. This time, 5 star product, one star customer service.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.