This 15" x 5" steel wheel is rated for 2,200 lbs and meets Department of Transportation standards, giving plenty of confidence when it’s time to haul something heavy. With a 0 offset, 3.19" pilot diameter, and 5 on 4-1/2 bolt pattern, the setup is sturdy and balanced for steady tracking on the road.
Corrosion doesn’t stand a chance thanks to Dexstar’s triple protection. The zinc base layer fights oxidation, the e-coat seals out moisture, and the powder coat adds a durable shield against chips or saltwater exposure. It’s built to handle humid air, splash zones, and road grime without flaking or rusting.
The tough steel construction provides solid performance under load and helps maintain true shape mile after mile. The modular wheel design looks clean in pebbled dark silver while delivering the strength needed for consistent towing and long-term reliability.
With its standard 5 on 4-1/2" pattern and 1/2"-20 wheel bolts, this wheel fits straightforward setups without special hardware. The dimensions make it easy to match with hubs already using this very common layout, so installation is smooth and hassle-free.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Dexstar 15-inch-by-5-inch pebbled dark silver modular steel trailer wheel with the 5 on 4 1/2-inch bolt pattern. Now, this wheel is a sturdy steel construction. It is a modular design. When we say modular design, that's the one that has the round holes that go all the way around the wheel.
Now, this wheel has excellent corrosion resistance, and we mentioned the finish on this. The finish is a pebbled dark silver powder coat finish over an E-coat primer. What I wanna do is zoom in even a little bit closer just to give you a better idea of what that finish would look like. So you can see as I tilt it, has sort of a unique pebbled dark silver finish. Now, this is a high-quality wheel.
It does meet the DOT, Department of Transportation, specifications. If you notice, it does not come with the center cap. If you do want one, we do sell those separately. You do wanna make sure to get a center cap that'll have the same diameter as this pilot hole 'cause when you install the center cap, it will go through this hole. The diameter of the pilot hole is 3.19 inches.
This part is made in the USA. The dimensions on this wheel, we're gonna measure the diameter, which will be measured inside to inside. So on this one, it's a 15-inch. So you can see, if we get our tape measure and we go all the way across inside to inside, there's your 15-inch diameter. The width will be the same way.
It's inside to inside or bead seat to bead seat. There's your five-inch width. And the bolt pattern on this wheel is a 5 on 4 1/2-inch bolt pattern. And if you wanna measure that bolt pattern on a wheel that's an odd number of lugs, like, in this case, five, what you'll want to do is you'll pick any one of the holes here, let's say this one, and you're gonna measure across to either one of these holes. But when you measure it, it's from the center of the starting hole to the furthest edge of whatever hole you measure to. So on this one, if we measured it, it'd be 4 1/2 inches. So that means this has a 5 on 4 1/2-inch bolt pattern. Does use a wheel lug size of a half-inch by 20, and the weight capacity on this wheel is 2,200 pounds. But that should do it for the review on this Dexstar 15-inch-by-5-inch pebbled dark silver modular steel trailer wheel with the 5 on 4 1/2-inch bolt pattern.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.