Video Transcript for Hands-On with the Hub-Piloted Solid Center Wheel w +0.19" Offset

Hi everybody, Andy here with etrailer.com. Let's take a look at this Hub Piloted Solid Center steel wheel. Now this Hub Piloted steel wheel has a capacity of 6,005 pounds and it has a positive offset of 0.19 inches to ensure that it is positioned closer to your trailer frame. This is going to have excellent corrosion resistance with this black powder coat finish over an e-coat primer. And this is a Hub Piloted wheel, which means it will center on the hub of your axle and not on the lugs. The pilot hole diameter is 4.76 inches.

This does require the use of flange nuts for installation. We do sell them separately here at etrailer.com, and this does use a wheel lug size of 5/8 of an inch by 18 flange nut. Now this wheel does meet the Department of Transportation specifications, and giving you some overall measurements of this wheel. Taking a look at the diameter first, we are sitting right at 17 and a 1/2 inches. And then looking at the width, we're sitting right at 6 and 3/4 inches.

The bolt holes are non-chamfer. And speaking of bolt holes, our bolt pattern is 8-on-6 and a 1/2 inches. And in case you don't know, the first number in the bolt pattern is the number of bolt holes, and then that second number is the diameter in inches of the circle on which these bolt holes sit. So to determine the bolt circle diameter on wheels with an even number of bolt holes as we have here, you're simply going to measure from the center of one bolt hole to the center of the hole directly across from it. Well, I think that's gonna wrap up our quick look today.

I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.