These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a brief look at the CE Smith carpeted bunk boards for your boat trailers. Now these carpeted wooden boards are going to replace your boat trailers worn out bunk boards and they're going to support your boat's hull during trailering. And just to give you an idea of the size of these boards, let me go ahead and bring my tape measure here. So as you can see, we are sitting right about 24 inches long. And then, looking at what I'm gonna call the height here, four inches tall and two inches wide.
The marine grade black carpeting is strong, but it's also soft and it's also weather resistant. So that's gonna minimize the scratching on your hull. But this carpet's also going to resist mold and mildew and it's going to rinse off easily and dry quickly. Now you can install these bunk boards in at least two ways. You can mount to existing brackets on your trailer frame or you can attach to the trailer frame with swivel brackets which are sold separately and allowing for the height-angle adjustment that you might need.
You are going to receive these two wooden carpeted boards. I think that's gonna wrap up our real quick look today. I do hope that our brief time together was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Ratings & Reviews
When I recieved the package one end of one of the bunks had a piece of broken 2x4 and the carpet was torn. The other one was in good shape. I replaced the one.
Very poor shipping choice (USPS). Took 12 days to be delivered. Tracking info was equally poor.
A perfect solution for supporting the bow of a Jon Boat. When I purchased the boat & trailer, the bow was only supported by a conventional V roller. That would’ve been fine on a V hull boat , but the flat bottom Jon boat needed more support..
This is the perfect solution. It quickly attaches to the trailer tongue & supports a much wider area on the bottom..
Couldn’t be happier.
Thank you so much for saving me a hardware hunting headache. Lol
Bob
I needed to replace the bunk board on my Pontoon trailer and these were the right size for my needs. The price was also the best I found. They arrived a couple of days earlier than expected. The appeared well made and look just like the orginals that came with the trailer. I drilled starter hole at the mounting spots and attched the boards. worked get looks like new. Will oder again if I need to repplace other boards.
Excellent product fast order processing. Made my trailer restoration simple.
Thank you
Ordered bunks, shipped 2 days, awesome service
Excellent product and excellent service!
Excellent replacement bunk boards for my boat trailer.
So from the appearance, these bunker boards looked nice. On closer review the following or items I found that I was not expecting for the price you have to pay for these: no label was on the carpet as his seen in the photo for the company name, carpet was not glued to the board to ensure it will not move back-and-forth preventing premature Waring out of the material, standard steel staples were used to attach the carpet to the boards. We’re stainless steel staples or the normal for this type of product. Not satisfied with that for the price.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.