To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Truck beds take a beating from weather and heavy gear, but this cover holds up. The fiberglass-reinforced plastic construction with a honeycomb-patterned internal structure adds serious strength without extra bulk. It can handle up to 200 lbs of evenly distributed weight, so you can toss your gear on top with confidence. The textured matte black finish keeps it looking sharp even after years of use.
When rain or road spray hits, this cover keeps your gear protected without the need for drain tubes. Tight weather seals run along the edges to block out water and dust, so what’s underneath stays clean and dry. It’s a simple design that works in all seasons—no extra parts or hoses to mess with.
You don’t have to remove the cover every time you need more space. The folding panels give you up to three-quarter bed access in seconds, and if you need the entire bed open, the cover can be easily removed. It folds flat and stays low—just 1" above the bed rails—so it keeps a clean look while still giving you room to haul tall or bulky loads.
Opening or closing the bed is easy thanks to the pinch levers on both sides. You can unlatch it from either side without crawling across the truck. Once closed, it locks in place when your tailgate is locked, keeping tools and gear safely out of sight. It also shuts whether the tailgate is open or closed for quick operation when you’re loading up.
No drilling or complicated brackets needed here. The clamp-on design mounts inside the bed rails for a clean fit that doesn’t interfere with tie-downs or accessories. Once it’s tightened down, you’re ready to go—no adjustments required. It’s built for straightforward function that just works every day without fuss.
Customer Satisfaction Score:
40% were satisfied with this product
60% of customers were not satisfied
Ratings & Reviews
There are large gaps in both front corner where you can see daylight. The kit included 2 different types of rubber weather stripping, but the instructions didn't show where or how to install it.
Seems to be an excellent product for the price, and was very easy to install. This appears to be the etrailer clone of a more expensive brand, and that’s fine as long as the quality is there. Time will tell how well it holds up.
Good instructions and fit well without fussing to much.
The cover is working great for me, it is a very nice product for the price point. I did have to shave one of the latches down so it would engage and lock. I still give it a 5 star.
Installed on 2025 GMC 2500HD; great fit, easy to install even though directions are lacking detail. Like what's the foam strip for? Have yet to rain test but after filling 2 front gaps at rail, there's no light coming through.
Cover fit very well. Appears to be good quality
The etrailer installation video needs to update. The instructions and install has changed a little
Good quality cover. Easy installation
After 1 year it is still looking brand new.
Keeps inside bed dry and flips open enough to hook up the 5th wheel with completely removing. So far very happy
It had a broken part and after a week they still couldn't decide what to do. Replacement part or replacement cover. I sent it back and bought one elsewhere!
Seems a solid and well-built product, especially considering the very good price. Only weak point might be the system used to fasten the rails to the bed, which, on my Chevy with the factory plastic bedliner, anyway, leaves them feeling slightly wobbly. This is very much the nature of these "no-drill" systems, though, and so I don't much mind that I will probably end up screwing or bolting the rails to my bed. To be clear, it works fine as it is. Nice product!
Does exactly what I needed. A cover that is secure, dry and at a fraction of the cost of others. If you want flush this is not for you. But that did not matter to me.
Love it so far after 1 year.
The quality of the cover seems to be there but installation could have been easier. Installed the distance between the rails was a 1/4 inch too narrow and the top would not close. The brackets which were completely different from the ones in the video had to be modified to get my 1/8 inch on each side. Also the were no spacers and brackets to lock down the forward section. Once I modified everything the cover fit and looks great. It would be nice if the installation video included the current brackets which do not work as constructed. I would suggest you try to install the new version of the brackets.
So far the Tonneau Cover seems fine, and a great value for the price. My review is largely for the cover. With appropriate instructions it should take less than an your to install.
Unfortunately the instructions are inaccurate and the video is out of date. The video is fairly close, I would recommend following the video and ignoring the printed instructions. The bed rail clamps have changed since the video was made and a couple of the cover features are a little bit different.
Trying to follow the printed instructions cost me an extra 3 hours. I suspect the instructions were written for a different vehicle and mistakenly reprinted for a 2026 Tundra. The first step is to remove the bed rails and then insert spacers to lower the bed rails. The included tool to remove the rails is the wrong one (allen not Torx). I had to run out and get a tool. Then after removing the bed rails I discovered that this instruction step was incorrect. I had to remove the spacers and reinstall the bedrails. Very frustrating, as you can imagine.
High Quality feel and materials. Fit was perfect for my Tundra. Read the installation instructions thoroughly before installation. Extra parts come in the box to adapt to different type installations. Separate the parts you need and it installs as directed.
Installed on a 2024 F-250. The install was very straight forward and easy to
understand, especially with the install video eTrailer provides. It fits well
and looks good. Took me about 1.5 hours to install.
My new tonneau cover fits great on my 2019 Chev Colorado. It was easy to install, easy to engage with the latching and sturdy when closed. I'm happy with my purchase and recommend it anyone considering this product.
There a rolled rubber seal on the back panel, does it stay inside or do you roll it out?
I purchased this because the Bakflip I had extended too far into the 5'9" bed of my Sierra when folded, and interfered with my fifth wheel hitch. I was skeptical of the etrailer brand, but found both the design and construction superior to the Bakflip. I especially like the straps on the latch release of each section. I took off one star because the latches on the rear-most section do not consistently catch, but this has not been a problem.
For the price, this has been a nice cover. I have had it more than a year now so I have a few thoughts. First of all, the installation was simple and straightforward. The cover itself isn’t too heavy and I was able to put it on by myself. The butyl tape came in handy because on my truck, I had a 1” gap on both forward corners and the tape sealed them up tight. At first, I had trouble with a couple of the side latches staying latched. What I discovered was my truck had a bent side rail where something heavy had been dropped on it. Once I figured that out I was able to add a shim between the attached side rail and the truck bed rail that raised it just enough for the latches to stay latched. I also like that I can leave the cover on when I hook the 5th wheel up to it. I’m using a Gen Y Executive hitch and I have plenty of clearance between 5th wheel and cover. The Tri-fold system is nice and it has straps that secure it in the open position when going down the road.
I do have one negative comment. The rear seal between the cover and the top of the tailgate is so tight that the tailgate won’t open on its own, even with the auto open feature of my truck. I don’t see any way to adjust it to take the pressure off so I’ll just have to live with that. All in all it’s a great tonneau cover and it suits me perfectly.
This is exactly what I was looking for. Form, fit and function are excellent and the installation was easier than what I had anticipated. All for a fraction of the cost of getting a similar product installed by the Toyota dealership. My only issue is that currently 2 of the 8 latching mechanisms are not catching the side rail when I close the cover. I suspect this requires an easy adjustment that I haven’t taken the time to figure out yet. The cover sits flush and secure to the truck bed side rails so I’m sure I can figure this out.
This cover has worked flawlessly.
It has kept the bed dry in all but the heaviest wind blown rain. Better than any other cover I have had
I just finished installing the bed cover on a 2026 Tundra. The product itself is hard to complain about; seems to be good quality, time will tell. The instructions and the etrailer video leave a bit to be desired.
Thoroughly appreciate everyone I spoke to at etrailer and the quick shipping and fantastic pricing. That being said, maybe take a few days and give the instruction sheet a good look.
All this being said, the vague assembly instructions sheet was certainly not enough to keep me from buying this again. Looks much better than many more expensive covers.
I really can’t reviewing the product because I made a mistake of ordering the 6’ tonneau instead of the 5’. I called eTrailer and spoke with Eli and he walked me thru the process of returning the tonneau. It hadn’t been delivered yet so when the UPS man arrived with it I told him it was going back to eTrailer, then handed him the return shipping label Eli had emailed me. All is good…outside of me having to pay for the return shipping…but that is on me. I need to pay closer attention when ordering “size specific” items.
Condition: Installed
Notes: There are install marks from previously being test fitted. All hardware is included.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.