To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Many covers make you choose between protection and full access, but this one gives you both. The TruXedo Pro X15 rolls up quickly and secures behind the cab with built-in safety straps, so you can haul tall tools or bulky loads without removing it. Even rolled, it stays low and doesn’t block rear-window visibility. Because it mounts inside the bed rails, you still have room for stake-pocket-mounted accessories, tie-downs, and bed caps.
A bulky cover can ruin your truck’s lines and even drag on efficiency. The Pro X15 sits just 1/2" above the bed rails for a flush, streamlined look that helps reduce wind drag. Its 15-degree-angled side rails keep the surface smooth and level, while the automatic tension control system maintains a tight fit in all weather. The self-leveling design keeps everything square, so the cover fits clean and stays sharp.
The matte black fabric isn’t just for looks—it’s tough. The woven polyester with vinyl backing resists UV rays, fading, and extreme temperatures. It stays flexible through heat or cold, keeping dirt and dust out so your gear stays clean and dry. Automotive-grade seals at the cab and tailgate help block rain and road grime, giving you near-watertight protection through every season.
You don’t need power tools to get this cover on. The aluminum side rails clamp directly to your bed rails—no drilling required. Once they’re clamped, the self-leveling design keeps them properly aligned while you attach the header with spring-loaded latches. Hook-and-loop fasteners along the sides make rolling it out easy, and you can secure or remove the whole thing in seconds with the Quick Latch at the tailgate.
Operating it is as straightforward as it gets. Roll it closed, press down on the rearmost slat, and it locks in place with spring-loaded steel plungers. When you need access, pull the Quick Latch from either side to release it. The cover can’t be opened when the tailgate is locked, adding peace of mind when your gear’s in the back.
Ratings & Reviews
The cover in general is great.. However, I am having a problem with the cover being too tight against the tailgate lid. Why ????? Problem: When I get the cover in place with the clip on the left down and snapped in place, I can not open the tailgate of my Ford F-150 to open either with the key fob or manually by pushing the tailgate button on the gate itself. Every time I try, the gate unlocks (click) and then locks again within less than a second. I have to reach under the Velcro side and release the clip to allow the very end of the cover to relax and allow the tailgate to open. I believe there may be too much pressure down on the tailgate lid across the back to allow the tailgate to move automatically. Is there any dealer near me that could look at the installation and tell me what's wrong I love the cover, but use it in a mostly loose position or rolled up. I would appreciate any help you may be able to offer. Thanks
Looks great but doesn't roll up and roll out has well as other covers I have had. Despite multiple attempts to adjust for squareness it is always off.
Nice top install was a breeze
Thank you All for making the effort to ship to Canada,Eh !.
The Tuxedo Pro 15 fit our 2021,3500
Silverado perfectly.
Looks great works great easy install
This is a great cover. It works perfectly with my Adarac bed rack. Installs easily and is made with premium materials. Functions great and stays surprisingly clean being that it is matte black. Haven't noticed any fading so far.
This is the 3rd vehicle I have installed tuxedo covers on. It is a quality product, with easy installation. It is great for keeping contents of truck bed dry and secure. The low profile really makes the truck look amazing . Well worth the price.
Very happy with this cover. Seals out water very well. Easy to use. Open tailgate, flip the lever to raise the seal. Put in or take out cargo. Close tailgate. Push cover down to re-lock. Easy Peasy. Looks same now as when new. Stays tight in hot weather. Not too tight in cold weather.
Great as usual, can’t believe how fast we received it, thanks again.
Fits great, looks great. Keeps the rain and snow out.
Absolutely love it, never thought I would switch from my previous cover mfg until I tried this one. Works great in all kinds of weather and no issues of any kind. Would recommend this cover to anyone looking to purchase one.
Fits perfect and the Velcro is solid.
I have bought nothing but TruXedo tonneau covers because they are the best! And this new Pro X15 is amazing. It's been on my truck for over a year now and made it through the harsh Michigan winter/snow with ease. I would buy with 100% confidence!
After I completed my order of a replacement tonneau cover fabric, etrailer did an amazing job making sure my order was going to be exactly what I was needed. I received a couple different emails requesting additional information from me. I was also very well informed of my package AT ALL TIMES!!! I could look every day and see where it was and when it was going to show up. The cover fits PERFECT!!! Couldn’t be happier with my Truxedo X-15 replacement cover. Thanks etrailer!!!
I absolutely love it! Keeps my 5th wheel hitch out of the weather and looks great doing it!
The tonneau that came was the proper one. Half the stuff I have ordered from other vendors has been the wrong part. Product was prompt and in good condition. I have never been let down by ETRAILER, Thank you.
Easy install and great product. Second vehicle with same cover
Great cover. Super easy to install on my new Ridgeline. High quality, and I love the matte polyester topside of the cover. Looks and works great!
Easy ordering and fast shipping. Well made product. Easy installation, just read instructions and watch videos.
I purchased this Tonneau cover for my new truck and couldn’t be happier. Being able to roll it up all the way to the cab is what makes it perfect to have full access to your bed. I couldn’t recommend it more.
The cover seems good. But the latch does not work with Jeep Gladiator. I have ordered the low profile latch. Hopefully it will fit in the tight space.
I love the look , but the fit for this 2026 ram isn’t the best at the tail gate , and I think there should have been a little more efforts put into the seal designs on the ends .
I have this brand on 2 of my older GM trucks and I love them . I’m not totally dissatisfied , I just think there could have been more design out into this cover for the money it costed , and to keep things sealed .
Because I’m pretty sure when it rains , there will be some water get in at the tailgate seal area and possibly the front corners of bed .
But the material quality looks and feels to be really nice . Just the fit design needed more attention .
If I were to spend the money again , and knowing what I know now ,I would be looking hard into other brands to see how their designs are .
This is why I give this cover a 3 star rating , because it has its pros and cons . I love this brand but different model on my older trucks , and that’s the reason I bought this cover .
And I would have like to have had a little more lip to go over my bed sides , this part of the cover also is a little shy on design as well .
It does look good on the truck , and it doesn’t stick up , it looks pretty sleek as far as that goes .
But this is my take on the overall
Great cover. Fits my RamBox bed perfect ly
Looks great
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.