To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting to your gear is simple with the Trifecta 2.0’s tri-fold setup. Just open the tailgate, release the spring-loaded EZ-Lock clamps, and lift the rear panel to reach inside. You can fold the cover forward and secure it with the built-in buckles at the cab to open up two-thirds of your bed for hauling bigger items. When you need full access, undo the Jaw-Grip clamps at the front and lift the cover off completely—no tools needed.
Some covers leave bulky rails behind when you remove them. The Trifecta 2.0 is fully self-contained, so everything you need is built right into the cover. There’s no drilling or separate hardware, and when it’s off, your bed looks untouched. The T-style clamps fold neatly inside the frame, ready to hook under your bed rails whenever you reinstall.
The frame and bows are made from aircraft-grade aluminum with a black powder coat finish that resists rust. Fiberglass-reinforced nylon clamps and hinges keep things secure and hold up well over time. The vinyl skin is permanently attached to the frame, using a sewn perimeter instead of hook-and-loop strips for a cleaner, tighter fit at the corners and hinges.
Rain or shine, your bed stays covered. Snap-on rubber seals run around the perimeter to help keep water out, while the heavy-duty leather-grain vinyl skin is tested for extreme heat and cold. The integrated design keeps everything tight and smooth so there’s no flapping or gaps in bad weather.
Installation takes just minutes. Set the folded cover on your bed, tighten the front Jaw-Grip clamps on the bed flanges, unfold it, and lock down the rear EZ-Lock clamps. The spring-loaded handles snap into place automatically and release just as easily when you’re done using it. No drilling, no extra parts—just clamp it down and go.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Since 1982 Extang has been perfecting the truck bed cover. For over 10 years the Trifecta's been the best selling soft folding truck bed cover in the world. Now we are proud to introduce the all new Trifecta 2.0 like the original the Trifecta 2.0 is incredibly simple to use. To close the cover, unbuckle the straps, fold the cover back, then secure it using Extang's all new EZ Lock Clamps. The tailgate can be opened and closed with the cover in any position. The Trifecta 2.0 keeps prying eyes out.
Locking the tailgate helps ensure that no one will get into your truck bed. The Trifecta 2.0 allows you to maintain ready access to your bed for easy loading and unloading. When properly secured the Trifecta 2.0 can be driven in the open position. For extra large cargo, the whole cover can be removed in seconds. Just release the T-handles on our new Jaw-Grip front clap and lift the cover off. This premium truck bed cover requires no assembly, no drilling and installation is as easy as positioning the cover on your truck and tightening the clap.
You can go from out of the box to on the road in just a few minutes. When closed the Trifecta 2.0 sits low on your truck bed. It's soft curves and sleek design create a smooth contoured, low profile appearance. The heavy duty, leather grained vinyl has been tested to withstand the harshest winter and summer conditions. Drawing on our decades of experience Extang has regarding-engineered the frame, hinges and corners of the Trifecta 2.0 to provide any greater durability and lasting value. The new multi-lipped seals are installed without adhesive and have a crisp, straight appearance that provides the best seal available for incredibly effective protection from the elements.
The frame is the strongest and best looking in the industry, made from lightweight, aircraft-grade aluminum. The frame is painted black to match the vinyl. Extang's all new EZ Lock Clamp features an exclusive spring-action handle that locks the cover to the truck when you release it. Our new Jaw-Grip front clamp grips each side of the bedrail, creating both lateral and downward force, providing a secure installation without damaging your truck. It attaches securely to the truck bed without distorting the bedrail. Extang is committed to quality and stands behind the Trifecta 2.0 with a best in class lifetime warranty.
Trifecta 2.0 premium soft folding truck bed cover is the perfect compliment to your truck. The Extang Trifecta 2.0 is the number one choice in truck bed covers.
Ratings & Reviews
Lazer S.
1/27/2026
Sorry to hear that, Craig. I can't say I have heard of one of these failing so quickly, so I am surprised. That said, the picture you sent is of a hard folding cover and what you ordered is a replacement for a soft folding cover. Is the picture of a different cover? And then also, can I ask who you contacted exactly? I checked your account and your email address, but I could not find anything sent in. Did you use a different email address by chance?
Paul L.
6/17/2020
Very happy with cover, was very easy to install. Keeps everything in bed dry and hidden. Easy to remover for larger loads. Looks great still. All in all was a fantastic experience with product!
Kyle
3/27/2020
Product worked great for the time that I had the truck it was on. The material didnt fade from the sun and it never tore or scratched if something hit it. I definitely would purchase again.
Burnie S.
12/11/2016
It is a good product. I really appreciate the ease to open the cover when you need an open truck bed
Cliff B.
6/7/2019
Still love it, Still working great.
Kate F.
4/9/2026
I am very sorry to hear that install was more difficult than anticipated. A lot of companies do have an install policy, it was on there for more than one day which is why we can't take it back. Once again, my apologies that you are not more pleased with the cover, this is not the typical feedback I get on this product.
Rdw
10/29/2021
still remains in like new condition after another year and another Maine winter.
Mike B.
8/28/2018
One of the best quality tonneau covers I have owned. Still holding up great after a year.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken
5/26/2026
its good, still wish the quick releases were on all 4 corners. real pain to reach in for front releases