To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need real protection for your gear, the Revolver X2 delivers. It uses 1/4" thick, aircraft-grade aluminum slats covered by a UV-resistant, textured black vinyl skin. The hybrid build blocks out rain, dust, and sunlight while keeping the sleek look of a soft cover. Once latched and the tailgate locked, the interlocking rails and reinforced levers secure the entire length of the bed, so your tools or groceries stay safe from weather and prying hands.
Most hard tonneaus make you choose between security and space. The Revolver X2 rolls up in seconds without removal, giving full bed access for hauling large items. Built-in nylon straps and plastic buckles hold the rolled cover neatly behind the cab, and rubber bumpers keep it from contacting the truck. Because the rails mount inside the bed, you can still use stake pockets or side-rail accessories without interference.




Opening or closing this cover is quick and simple. Just roll it out and press down the rear slat—its side rails automatically lock along the entire bed. To open, drop the tailgate and pull one of the two release cords. There’s no Velcro or snaps to fight with, and the latching system keeps everything aligned and tight every time you close it.


The Revolver X2 sits nearly flush inside the bed rails for a clean, aerodynamic look that reduces drag. The aluminum structure supports up to 400 lbs of evenly distributed weight when closed, and the rustproof, powder-coated rails resist corrosion through years of use. Felt strips under the slats prevent scuffing and make rolling smooth even in heat or cold, while rubber seals along the edges help keep water from seeping in.



Getting this cover installed doesn’t require a shop. The frame rails clamp directly to the inside of the bed, and bolts at the front hinge rail lock everything in place with no drilling. Pre-installed shims and slotted brackets help align the rails for a snug, square fit the first time, so you can have the cover mounted and ready to use with just a wrench.





Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Randy: Hey guys, it's Randy here at etrailer.com again. Today we're taking a look at the Back Industries Revolver X2. This is a, as you can see, a hard style tonneau cover that gives us that classic smooth look. It has flush rails so it doesn't stick up off the side of the vehicle very much. Overall, it offers a lot of security and a lot of protection, which is generally what we're looking for out of an tonneau cover.Either we have sensitive items in there, we don't want them getting wet, we don't want them getting dirty, so we wanna protect them. Or we have expensive items in there.
We could have tools, stiff wheels, things like that. And when using this cover with the locking tailgate, it's one of the most secure lids on the market.Now some additional benefits that we have are the look quality with this. You can see it's a nice, flush design, it doesn't really stick up over our bed rails very high. It's just gonna give us that clean, sleek look but offers a lot of protection. Also as a side effect, we're not gonna have that wind bucketing into the bed of the truck.
That can help reduce wind noise, it can help reduce wind drag. That'll kind of lead us into better fuel economy.Now when in the stored position, something I really like are the straps. These are designed to come around, they clamp in right down here to the rail. And essentially when rolled up, that's gonna keep this from moving forward or back. It's a nice handy feature so we don't have to worry about contact up here, or maybe it heading back towards the bed of the truck.Also if this we're to roll up too far, which in most cases, it actually can't make contact with the truck, we do have some pads here.
Those will make sure that as it makes contact, we don't have any scarring on the cover or on the vehicle. Here you can see the front side of those straps where they come in, just nice, easy to use clips. Squeeze it to remove and press it in to attach it.Now when we compare the Revolver X2 to other tonneau covers that we have available, I like the solid design. We're getting a huge upgrade, having a nice solid panel where nobody can get in or at least cut through something that's very thin and gain access to the bed. But I also like the other advantage it has, and that's at where it stores.
It's gonna store right up on here on top of the bed, so our bed is left completely unobstructed.There are other roll up style tonneau covers that just slide in and out on the track and those are gonna have a box that sticks down in the bed for it to roll up in. In that situation, you're losing some of your bed capacity, so that's definitely something to keep in mind. Other type covers that offer the same style of protection or give us a hard surface will be like a tri folder or a quad fold style cover.You're gonna fold the panel over onto itself, onto itself and then eventually, up against the back of the vehicle. Now basically when you fold that last panel up, it's pretty much gonna obstruct the view out of your rear window. With the roll up cover here and the way it sits, generally it's not gonna be any higher than our headrest on that back seat. So really, we're not gonna lost that much field of view out of that back window.Now another thing that we can appreciate about this cover is that this installs relatively easy on your pickup truck and it requires zero modifications. It's gonna work with beds that are painted just like this one. Spray in bed liners or drop in bed liners. Although on a drop in bedlinen, you might have to make a few cuts here and there to allow our clamps. You can see we're gonna have on short bed applications, six of these. Long bed applications are gonna have eight of these.Those are designed to grab the rail of our cover and our bed rail to keep everything nice and secure. Now, the security aspect we hit on a little bit earlier, what makes it such a nice, secure cover. Not only those really thick, quarter inch aluminum slats, but each of those slats has a locking tab on the end of it. You can see as we roll that up, each one of those tabs is gonna have that black piece that comes off the end.And when we close our cover, you see how that aluminum rail here That goes in and then engages that tab. So what that means, comparing this to a folding style cover, is that we have 100% lock coverage all the way down the side, rather than just having our clips at each of our little intersections. And now also to the protect the outer surface or the surface we're gonna look at when our cover's rolled up. You can see the entire length has been covered with a nice felt. That's gonna help to decrease the possibly of our aluminum transferring over onto our vinyl cover.Another feature I appreciate that we don't always see with other tonneau covers, is that even with it closed, we're still able to close that tailgate so we don't have to open it, close the tailgate and then close it on top. Also with locking tailgates being very, very popular, we've got the solid security of our cover. Once we lock this tailgate, it's gonna make it very hard for somebody to access that bed.Here you can see the latching mechanism. It's gonna be the same on both sides. We've got a release handle right here. You'll notice as we pull that down, it engages that lever. That's the lever that brings in the locks all the way down. And we just simply push it down until we hear the click on both sides. We're ready to shut our tailgate at that point and hit the road.Now when it comes time to release your cover, it can be done from either side. We have a release handle here, and then on the same spot here on the driver's side we're gonna pull that. And then it's just a one person job. We don't have to have one person on each side trying to get everything rolled up properly.It's also an all weather material, so regardless of if you're in a colder climate or a hot climate, you're not gonna have any problem getting this rolled up and then rolled back out. Unlike some of the other covers, when it got cold outside, they we're near impossible to use.So as you can see, there are a lot of benefits to the Revolver X2, but there are tons of tonneau covers out there on the market. I think this one's strengths are increased visibility in the back of the truck so we can see what's behind us and also really maximizes the security that we have in our truck bed.
Ratings & Reviews

Keith C.
3/12/2017
Hi Laura - I am still pleased with my BAK bed cover. I dont like it quite as well as the previous version I had on my other 2013 Nissan Frontier truck which got stolen, hence the new cover, but I am still pleased with the product. The new cover doesnt roll or latch quite as smoothly as the old one, but it still works well. They also slightly changed the clips for anchoring the rolled up cover, and I find them harder to clip in and maintain tension on the strap, but again they do work. Thanks for following up.

Sean M.
4/12/2020
Its still holding up well and it looks as good as it did the day I installed it. I have no regrets about making this purchase.

Kyle R.
5/22/2020
My judgment has not changed. This cover is still excellent. If I ever get a different truck, this will be among my first accessory purchases.

Martin H.
3/4/2020
Well, not so happy with the product. The carpeting fell off on the underside of the cover. Also the right side of the cover towards the tailgate shrank. Its been a few months since I started to have those issues and should of contacted you earlier for warranty. Hopefully its not too late for a warranty claim.

Matt
11/22/2021
Couldnt be happier! Great quality product!

Jenny N.
7/17/2023
I am sorry to hear that this cover is not working out for you. Would you be able to send a picture of where the vinyl is separating from the aluminum?

Nick S.
10/20/2025
I am sorry to hear about your experience with this cover. It is a BAK industries product that makes the revolver covers, did your not have the logo on the left side by the tailgate? What kind of truck did you install this on?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Bob B.
11/21/2017
Still water resistant, works well, and looks great