Video Transcript for Feature Review Replacement Angle Cylinder for Meyer Snow Plow

Speaker 1: Today, we're going to take a look at the replacement one, and a half inch by 10 inch power angling cylinder for the Meyer snowplows. Now this part will replace a power wrangling cylinder on a Meyer snowplow. It replaces the Meyer part number 05810. Now the rod on this is a one, and a half inch diameter rod right here. So if we put a ruler on that, you can see there's your one, and a half inch diameter. Length on this rod is 10 inches, so it'll give me a 10 inch stroke with a single acting power angling cylinder.The base right down here is one and five eighths inch diameter, and the pin size right here, these two holes is going to be right at five eighths of an inch.

Put a ruler on that, there's your five eighths inch diameter. Now the center to center dimensions from this pinhole or this pin hole, when it's retracted like it is now, is 16 and a quarter inches. And when this extends, the rod extends out from center to center on those pinholes would be 26 and one quarter inches. The port on this as a one quarter inch NPT size, and the location is in-line.But that should do it for the review on the replacement one and a half inch by 10 inch power angle and cylinder for the Meyer Snowplows.