How Do I Wire Up The Meyer Blaster 350S To My Pickup's Battery?
Published 10/16/2025
Question:
How do I wire up the Meyer Blaster 350S to my pickup?
asked by: Cheryl
0
Expert Reply:
Cheryl, everything’s included. The # ME98FR harness plugs into the spreader, runs up to the battery, and ties one small lead to a keyed ignition source. It’s fused at 20 amps and pulls about 15–20 amps when both the motor and vibrator run. No other kits or relays are needed.
Do you already have a pass-through in the firewall, or will you drill one for the controller lead?
expert reply by:
Andrew N
0
Product Page this Question was Asked From
Meyer Blaster 350S Motorized Professional Salt Spreader w/ Vibrator - Tailgate - 6.5 Cu Ft
- Salt Spreaders
- Tailgate Mounted
- Salt
- Salt and Sand Mix
- Vibrator Included
- 6 - 8 cu ft
- Meyer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Which Tailgate 2" Receiver Mounted Salt Spreader Is Going To Work With Wet Sand / Salt Mixes ?
- Q&A: Which Meyer Tailgate Salt Spreader Has A Better Brush Auger To Keep Salt Spreading Evenly?
- Q&A: Will Meyer Blaster 350S Motorized Professional Salt Spreader ME98FR Work For Traction Sand?
- Q&A: Can I Use Different Size Pellets, Flakes, Or Fine Salt In Meyers Hitch Mounted Salt Spreaders?
- Q&A: What Is The Difference Between Meyer Salt Spreader ME86FR 3.7 cu ft And ME26FR 6.3 cu ft
- Q&A: Do Meyer Tailgate And Hitch Mount Salt Spreaders Come With Vibrators To Prevent Clogging?
- Q&A: Can SaltDogg Electric Hitch-Mount Salt Spreader 337TGSUVPROA Be Filled With Sand?
- Article: How to Tell the Weight Rating of a Trailer Axle