
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you hitch up a camper or load up gear in the bed, sag and sway can make driving tough. The Hellwig EZ-1000 Helper Springs add up to 1,000 lbs of load leveling capacity to keep your ride level and steady. They mount above your factory leaf springs to reduce rear-end squat and body roll, helping maintain steering control and braking stability when you’re towing or carrying light loads.
Heavy loads can make factory suspension feel harsh or bottom out over bumps. These helper springs flex along with your existing leaf springs to limit bouncing while delivering a more stable, comfortable ride. You get better control without adding stiffness when unloaded, so your truck feels composed whether you’re hauling tools or cruising home empty.
No two loads are exactly the same, and this setup lets you fine-tune spring tension to match. The included U-bolts can be adjusted to suit different weights, and each side can be set independently to correct uneven loads. That means you can balance the ride when one side carries more weight, keeping things level and predictable on the road.
Reliability matters when you’re hauling often. The EZ-1000 uses durable steel construction with a silver vein hammer tone powder coat finish that resists corrosion. All mounting hardware is included for an easy bolt-on install above your factory leaf springs, giving you long-term suspension support that’s ready for real use.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Hellwig Easy 1,000 Above Axle Helper Spring Set. These custom helper springs are gonna install above the factory leaf springs on your vehicle. These are gonna help to reduce any sway and body roll. It's also gonna help prevent any sagging when you're towing or hauling a heavy load. Now these are a custom fit, but they are going to fit several different models of vehicle.
So many, actually, that I can't even list it in a graphic on the screen for you. So I would encourage you to use our vehicle fit guide here at etrailer.com. You'll select your year, make and model, we'll let you know which components are confirmed to fit with your vehicle. So if you've used that and you've gotten to this, you can trust this is gonna fit your vehicle. It's gonna do a great job for you.
So these are going to install and then flex with your leaf springs to help limit your bouncing while providing optimal stability for you. These do provide a weight capacity of 1,000 pounds. Now that's not going to increase your vehicle's weight carrying capacity. So it's very tempting to think when you hear that 1,000 pound weight capacity, it's tempting to think that that's going to increase your vehicle's weight carrying capacity by 1,000 pounds and that's not the case. There's no suspension enhancement system on the market that will increase your vehicle's weight carrying capacity.
So think of it less like a second set of hands that's helping you lift more weight and another partner to help lift weight. Think of it more like a back brace. So this system is going to install, it's gonna help take some of the strain off of your factory suspension, help to extend the life of your factory suspension. So, again, not gonna increase, but it is going to help bear some of that weight and ensure that it's going to perform well for a long time to come. This will install very simply.
You got the U-bolts here that are going to allow this to bolt above your factory leaf springs. All the mounting hardware is included. Now one thing you do want to note, this is not going to be compatible with vehicles that have composite or plastic leaf springs. It will only work with the steel leaf springs. So make sure that that's the case for your setup. Most people, when you think of suspension enhancement, they're most familiar with airbags. So airbags do a really great job for you. They give you a lot of adjustability. So if you're hauling a heavy load, you can put more air in them to support that weight. If it's a lighter load, you can let air out, that sort of thing. This system is going to be adjustable. You can adjust it, fine tune it. You can also adjust the U-bolts for off center loads and that sort of thing, but you're not gonna have as much adjustability as you would with airbags. Now, the good side of that is that it's basically a set it and forget it kind of set up. So you're not gonna have to worry about adding air or ticking air out, depending on the load. So it's just gonna kind of sit in there and do its thing. You won't have to worry about adjusting it unless you want to. So, lots of benefits to this kind of system. You're not gonna have to worry about leaks. Oftentimes with airbags, they will get leaks, but it's typically not the bag itself, it's a hose or something like that and it's hard to figure out which component is actually leaking. So this system would be a great benefit if you're just wanting to install it and not have to worry about adjusting it. It is made here in the USA of a durable spring steel construction. So that's going to ensure long lasting performance for you and this does have this silver vein hammer tone powder coat finish that's gonna prevent corrosion. So, again, it's gonna last you a nice long time and it does come with a limited lifetime warranty. So if you we're to ever have any issues with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers, try and solve any problems that you may have. So that concludes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Haven't installed yet. Missing hardware. It's annoying. Will edit review when installed.
Great addition to my sumo springs on a 02 Sonoma
Would give 5 stars but the hardware could have been better quality the thread on several u-bolts came cut pretty rough making starting the nuts quite difficult once on the rest was simple
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Katrina D.
8/20/2024
Oh gosh, I am sorry about that. Lets get the missing hardware shipped out to you right away.