Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1999 Subaru Outback Wagon
We'll connect you with nearby partnered installers who know this exact setup.
Air Lift 1000 Air Helper Springs for Coil Springs - Rear
Part Number: AL93WQ
In Stock
$149.99
Retail:$206.99
You Save: $57.00
1999 Subaru Outback Wagon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1325)
- Q & A (0)
- Videos (2)
- Photos
Air Lift Vehicle Suspension - AL93WQ
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- 1,000-lb Load Support: Keeps your vehicle level and stable when hauling or towing heavy loads.
- Safer Steering and Braking: Prevents rear sag so your handling and headlight aim stay consistent.
- Adjustable Air Pressure (5–35 psi): Lets you fine-tune support for even weight and smooth ride.
- Reduces Sway and Bottoming Out: Absorbs road shock to improve comfort and overall control.
- Simple DIY Install: Fits inside rear coil springs with all tubing, valves, and hardware included.
Features to know about
Stay Level and Confident: Up to 1,000 lbs of Rear Support
Heavy loads can make the back of your vehicle sag, which throws off your handling, braking, and even headlight aim. The Air Lift 1000 Air Helper Springs add up to 1,000 lbs of load-leveling support inside your rear coil springs, keeping your ride level and steady when towing or hauling. With the suspension balanced, steering feels sharper, braking stays consistent, and tires wear more evenly.
Fine-Tune Your Ride: Adjustable Air Pressure from 5 psi to 35 psi
Every haul is different, and these air springs let you dial in exactly what you need. Inflate or deflate each spring manually to match your load and driving conditions—run a higher PSI to handle heavier weight or drop it down for a smoother ride when unloaded. With dual air lines installed, you can even adjust each side independently to level off-center loads for better balance on the road.
Smooth Out the Rough Stuff: Polyurethane Springs That Absorb Shock
Bumps and sway are part of hauling, but they don’t have to beat you up. These molded polyurethane springs fit inside your existing coil springs to absorb road shock and minimize sway. The result is a more stable, comfortable ride whether you’re pulling a trailer, hauling gear in the bed, or cruising unloaded after the job’s done.
Install It Yourself with Simple Tools: No Frame Drilling Required
Installing real support doesn’t need to be complicated. The Air Lift 1000 kit fits inside your rear coil springs with no frame drilling required and includes all hardware, tubing, Schrader valves, and heat shields. The manual inflation valves can be mounted on your bumper or wherever access is easiest. Add an optional compressor system later if you want in-cab control of your air pressure—everything’s built to integrate cleanly when you’re ready for it.
Specs
Weight and Capacity
- Load-leveling capacity: up to 1,000 lbs
Pressure
- Adjustable air pressure: 5 psi - 35 psi
Warranty
- Lifetime warranty:
- 60-Day satisfaction guarantee:
60836 Air Lift 1000 Air Bag Suspension Support System for Coil Springs - Back
This Product Fits The Following Vehicles
- 2014 - 2020 Nissan Rogue
Video of Air Lift 1000 Air Helper Springs for Coil Springs - Rear
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Let’s Check Out the Air Lift 1000 Air Helper Springs for Coil Springs-AL93WQ
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Airlift 1000 Air Helper Springs for the rear coil springs. Now this is a custom fit part, it is designed to fit the 2014 to 2020 Nissan Rogue vehicles. And on a custom fit part like this, I do recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this'll work for application. Now this kit here will provide 1,000 lbs.
of load leveling support to help improve safety and ride quality. It does support your existing rear coil spring suspension when you're hauling or towing. This does help keep your vehicle level when you're hauling a heavy load, it improves the steering and braking performance, and it will even maintain the headlighting. It also helps reduce tire wear and OEM suspension strain. How this does let you manually adjust the air pressure to get even load distribution and support that you need.
And with the installation of dual airlines, you can inflate each spring independently for side to side leveling of any off-center loads. Now these springs do have an adjustable air pressure of 5 PSI up to 35 PSI. These will help diminish sway, absorb road shock, improves stability and ride quality. And if you can see here, they are constructed of a durable molded polyurethane. These are designed to install inside your vehicles rear coil spring suspension, and the manual inflation valves are typically mounted on your bumper, so they're very easy to reach.
This kit will include everything shown here on the table. The two air springs, your airline tubing, all the hardware you need, the Schrader valves we mentioned for installing the air. Comes with the nice installation guide that will describe how it operates and how it installs. And these parts are made in the USA. Now you can also add a compressor system with in-cab gauges to help monitor and automatically adjust your air pressure.
Those items we do sell separately on our website. A few specs on this kit, the load leveling capacity is up to 1,000 lbs. Now these Air Lift 1000 Springs will not increase your vehicle's weight carrying capacity. So you do want to make sure not to exceed the manufacturers recommended weight limit. But that should do it for the review on the Air Lift 1000 Air Helper Springs for your rear coil springs..
Ratings & Reviews
4.6
1325 reviews
by:
anita
08/28/2024
Worked great kept my car up when I hade a scooter on the back nice smooth ride
by:
Mark
07/18/2026
Put these on my 2020 Equinox, it has a tow package and pulls my little Wildwood trailer just fine but with this airliift system it feels SOOOO much more stable!! It drives much less ‘mushy’ and handling is a dream. These are simple to install, perfect product for pulling with a light duty SUV, I am extremely impressed.
by:
Charlie K
09/15/2026
2019
Kia
Sorento
Word of advice: It was WAY easier to just remove the coil springs and install the bags that way. (2016-2020 Kia Sorento)
Lift the rear end, remove wheel, disconnect the lower control arm, shock, and sway bar link. Take out the coil spring and insert the bag from the top. Reassemble in reverse order and torque bolts to spec. Much easier.
From that point it was just a matter of routing the air lines through the control arms, up through the subframe, over the spare tire, to the trailer hitch mount. Bags seem to hold air well and are holding up so far. Definitely made an improvement in handling around corners.
Note: There is a noticeable squeaking/noise from the rear end going over bumps at low speeds. Once you're on the pavement or up to speed it improves.
Loses one star for the noise and install. Otherwise not a bad product for the price, especially if you're the DIY type. I personally work on cars, so maybe it was a little easier for me.
Lift the rear end, remove wheel, disconnect the lower control arm, shock, and sway bar link. Take out the coil spring and insert the bag from the top. Reassemble in reverse order and torque bolts to spec. Much easier.
From that point it was just a matter of routing the air lines through the control arms, up through the subframe, over the spare tire, to the trailer hitch mount. Bags seem to hold air well and are holding up so far. Definitely made an improvement in handling around corners.
Note: There is a noticeable squeaking/noise from the rear end going over bumps at low speeds. Once you're on the pavement or up to speed it improves.
Loses one star for the noise and install. Otherwise not a bad product for the price, especially if you're the DIY type. I personally work on cars, so maybe it was a little easier for me.
Christopher H.
9/17/2026
Thanks for all of the detail here Charlie and really appreciate the photo!
by:
Rob
04/09/2025
Hummer
H2
I purchased this product for some additional support for our Hummer H2 when we are towing our travel trailer. I removed the springs for easier installation of each bag.
I am 66 years old and total time from start to completion was 3 1/2 hours from set up to clean up !
I am 66 years old and total time from start to completion was 3 1/2 hours from set up to clean up !
Gwendolyn Y.
4/10/2025
The helpers look great on your Hummer, Rob! What kind of travel trailer are you hauling?
Rob
4/11/2026
I have towed my RV several times over the last year and these helper springs work perfectly! I had a very small air leak but I added some silicone at the airline connections and it is 100 percent! I carry a battery powered air compressor with me and it’s basically a “set it and forget it” systems.
by:
Scott
01/11/2026
Works great on my 2000 Lexus LX470. I installed these to supplement my AHC deleted suspension. These were installed with Land Cruiser rear springs. Instructions were easy to follow. Routed separate air lines (did not use the y connector) above the frame and fitted the valves into existing holes on the bumper. Run them at 8-10 psi when I have gear in cargo area. Holds air perfectly.
Lazer S.
1/13/2026
Glad they are working well for you, Scott! I gotta ask, did you do the AHC delete as it was worn our or did you just not particularly like it? I've heard people do this for either reason.
by:
Arthur
09/24/2024
2021
Jeep
Wrangler
These air springs are one of the best investments you can make if you have a 4XE Wrangler. The battery pack is so heavy, I am finding after a couple of years the factory springs are getting too spongy and the body lean is more noticeable on the road especially cornering. Plus when you go over larger bumps the body sway is much more noticeable. I looked into an air spring set up but did not really want to spend several thousand dollars and I was surprised when I came across this set for under $[XX]. I was sceptical but thought, why not. They arrived in a small box and I was even more doubtful but when I opened it and took out the kit, I was impressed with the quality of the materials. I followed the instructions (with a few exceptions) and found them to be very easy to install. If you take your time with routing the air lines over the factory heat shields and carefully bring them to the rear drivers side, you can install them using the t connector. You can drill a hole through the thin part of the bumper right beside the license plate. There is just enough air line included to do this. The Schrader valve seats perfectly and makes it very convenient to add or bleed air from the system with only one adjustment. I set the springs at 12 psi and coupled with my after market adjustable shocks, I can make my Wrangler so smooth it feels more like a European SUV than a Jeep. Excellent product.
Arthur
9/25/2025
The air springs are still operating as well as the day I installed them. They do not leak any air pressure nor have they degraded in any way. What a great and simple solution that lasts.
by:
High Rolla Customs llc
09/22/2026
2009
Chevrolet
TrailBlazer
We install these on our customers 09 trailblazer to haul a big camper and they really helped a lot! Not just with the towing but just the daily driving and ride quality. 5 stars for sure. It’s a good kit and good price but add a on board compressor and really fine tune things
by:
Toby
08/02/2026
2011
Chevrolet
HHR
Great product works as should
Christopher H.
8/4/2026
Thanks for your feedback Toby. Really appreciate you adding a photo!
by:
Donnie M.
06/12/2026
2005
dodge
Ram Pickup
I knew going into this, this was going to be a pain to install. After 5 hours, I had to call a friend who was a mechanic to come over and help get the bags into the springs. We finally read enough reviews where people said to heat up the bags a little, fold them and zip tie them. This worked! But.....Here we are, they've been installed, traveled over 2000 miles with them in and let me tell you, the noise! OMG THE NOISE! Every bump, dip, hell - I think just for the fun of it - my car squeaks like a 1970's Cadi! I've used multiple Teflon lubricants, Bearings Grease and other various lubricants. NO, I didn't use WD40. You can hear me coming down the road the noise is that loud. I called Airlift as instructed and they advised me that they're not even showing that these are a match for my car although Etrailer does. The tech that I spoke to told me that if I've driven that much, with and without loads, adjusted the PSI (which I have. I've gone from 5-35psi as instructed. No matter where I am sitting, it is loud! For someone who is tone sensitive with high PTSD and ADHD/OCD - this is not working. Airlift said that there's a 60 day ride approval. I don't approve as I've gotten to the point that I don't even want to drive my 2025 car! Instead, I've been driving a 2005 van if I need to go to the store or anything. I've truly tried to let these be the savior of my needs, but I think I'm going to just bite the bullet and get a Gladiator or Ram.
Donnie M.
6/16/2026
Well, after going back and forth - basically it comes down to - 60 day drive warranty doesnt compute. So after spending $300 on install, now Im expected to spend another $300-$400 to have them removed to return them, oh and pay for return. So roughly $800 to get back $130. Ill chalk this up to understanding that if a product doesnt work out in any manner. To remove these, you have to take the rearend of the car off - shocks and springs - then try to get the bags out of a much smaller ending without damaging otherwise youll not refund. Basically no support, other than a were sorry.
James D.
6/16/2026
@DonnieM
Thank you for taking the time to share your experience. We're very sorry to hear how frustrating this has been for you, especially after the time, effort, and additional expense you invested into the installation.
I do want to clarify that these Air Lift air bags are confirmed to fit your vehicle application, this has been confirmed through Air Lift. However, we completely understand that while a product may be compatible with a vehicle, that doesn't necessarily mean it will meet expectations in terms of ride quality, noise levels, or overall satisfaction.
While I realize that doesn't change your experience, I do want to sincerely apologize that these air bags have not delivered the results you were expecting. We appreciate your feedback and the detailed information you've provided.
Thank you again for sharing your thoughts, and I'm sorry this solution did not work out the way you had hoped.
by:
Douglas
11/12/2025
Awesome Air Bag support for my rear springs for my 2014 Toyota Sienna 3.5" lifted van. It stopped rear sag with heavy loaf and body roll when driving.
by:
Benny
09/20/2025
2015
Honda
Odyssey
After installing I was very happy with the performance of the Air Lift kit.
A few notes I will highlight to help with install:
-When using the template, the hole is closer to the inside of the center of the van.
-Use a Step Drill bit to cut the hole in the lower control arm. I got mine from HF.
-Route the air hoses thru the lower control arms and zip tie them up along the rear subframe
-I sprayed with air bags with Lithium grease to keep any noises from occurring
-3d printed a bracket to hold the fittings on my rear hitch
A few notes I will highlight to help with install:
-When using the template, the hole is closer to the inside of the center of the van.
-Use a Step Drill bit to cut the hole in the lower control arm. I got mine from HF.
-Route the air hoses thru the lower control arms and zip tie them up along the rear subframe
-I sprayed with air bags with Lithium grease to keep any noises from occurring
-3d printed a bracket to hold the fittings on my rear hitch
by:
Jim Egger
07/29/2026
Chevrolet
Silverado 1500
I put the Airlift 1,000 kit on our Suburban LT 1500 which has a towing package on it to enhance the vehicles ability to lessen frost heaves on our Alaskan highways while towing our travel trailer. The air shocks of the towing package although heavy duty were stressed out on trips down the Alcan. The new airbags are working just fine and were easy to install. After ordering the kit, it arrived within the week. The instructions were easy to follow.
by:
Jimmy
05/18/2026
Overall, a surprisingly great benefit for very little cost and a little effort. Took some time to install (no harder than anticipated), the videos were very helpful. I struggled to get the connections all airtight, always had a slight leak. However, still saw a benefit to my suspension and ride, even when not towing. For our 2019 Pathfinder, where the "tow weight" is definitely a little fudged, these where a big help.
Gwendolyn Y.
5/20/2026
Thanks for the great follow-up review, Jimmy! Glad to hear the system made such a noticeable difference in both ride quality and suspension support, even when you’re not towing. It’s also great to hear the install videos helped out along the way. Air connections can definitely be the most finicky part of the install, so we appreciate you mentioning that for others considering the setup. Sounds like the end result was well worth the effort on your Pathfinder. Thanks again for sharing your experience a year later!
by:
Big B
08/02/2020
Fit my 2019 Toyota Senna AWD perfectly. Easy to install. didn't even have to disconnect exhaust hanger as instructed. instead i used a 1/2 drive universal joint with sockets to access bolt holes on passenger side. I pull a 2500lb boat or a 2000lb trailer with no problems. I use 15 to 30 lbs air pressure to keep level. i used two valves and separate air for each bag. I didn't want it shifting in long turns. I highly recommend and would buy again....
Big B.
8/3/2021
Still working great no leaks would buy againfor any senna rear with coils...
Big B.
4/2/2026
5 years later still working great hold air wo leaks and prevent bottoming while towing 3000 lbs
by:
Minnesota Steve
08/03/2026
I was replacing the same setup that I installed in 2007 it held air until last year Had to drop the rear axle to install but once everything is in place it work perfectly it's held air for a year would recommend placing as many of the fittings and the air input valve inside the truck they will last much longer
by:
Richard
08/10/2026
The product does exactly what it is designed to do at a very reasonable price point. The two star reduction is based on the uber difficult installation process for bags on this model vehicle. Other systems I've installed were done with the coil spring removed, and reinstalled. Ten minutes a corner. Having to contort this bag through the opening between two coils of the installed spring is unlike anything I've encountered in 50 years of mechanical work. No matter how much soapy water I applied, every minute or two, getting a midline crease in the semi-folded bag over an inch wider than the spring OD through and into the inner spring diameter was tortuous. It was every bit of two hours work for just the bag insertions, and I have a full car lift like the video, and removed the wheels for best leverage and access. Once the bags are in; the rest is a cake walk.
by:
Todd
05/23/2026
Bags came quick and easy to install . I did find that if you remove three bolts, sway bar link , lower control arm and shock and remove the spring it’s a lot easier to put the bag in . So far they are working great !
James D.
5/27/2026
Great tip about removing the three bolts, insight like this helps. Thanks for the response Todd and reach out if you need anything in the future!
by:
Jon
04/24/2026
2011
toyota
Sienna
Installed into the 2011 Toyota Sienna V6 FWD Limited (145k miles) and now is geared up a 2" receiver class II draw-tite hitch package and ready to tow are recently purchased metal 8' x 4'6" tilt-bed trailer, or any occasional heavy payloads in the minivan.
When I had updated my tired 2011 Sienna with new suspension components throughout the vehicle (including lower control arms w/ ball joint(s), transmission/motor mounts, CV drive axles, carrier bearing mount bracket, McPherson struts, rear shocks, brake rotors and pads (front and rear), rear parking brake shoes and hardware, outer tie-rod ends, steering/sway bars links, I discovered a broken, rusty rear, right coil. After all swapped out and four-wheel alignment completed, I opted to add this A1000 air lift kit too.
When I had updated my tired 2011 Sienna with new suspension components throughout the vehicle (including lower control arms w/ ball joint(s), transmission/motor mounts, CV drive axles, carrier bearing mount bracket, McPherson struts, rear shocks, brake rotors and pads (front and rear), rear parking brake shoes and hardware, outer tie-rod ends, steering/sway bars links, I discovered a broken, rusty rear, right coil. After all swapped out and four-wheel alignment completed, I opted to add this A1000 air lift kit too.
by:
Fred
10/01/2026
2023
Hyundai
Santa Fe
Seems to work so far. I like results, but air hoses are too thin. Need protectors where hose passes thru frame of car.
by:
Michael
06/30/2026
Well made and was fairly easy to install. I actually found it was easier to drill a hole into the bottom cushion to run the air line instead of cutting it out. The instructions were very easy to follow. What took the most time was hooking up the hose. I split it into one and ran it out under the bumper on the passenger side. My Durango has dual exhaust so I had to run the tubing up under the body. No leaks after set up and work very well with my rv trailer. Highly recommend.
by:
Thomas
07/18/2026
2021
Hyundai
Palisade
The hardest part to the install was figuring how to route the air tubing. Instructions were very clear to follow. They do provide a diagram on were to route the air lines but couldn't figure out how to get there without coming to close to the exhaust and muffler.
by:
Matthew
09/25/2026
2016
Toyota
4Runner
This is my second set of air lift , first have been on a 2005 Toyota 4Runner for the past 9 years and still work great. This set I just installed on my new to me 2016 Toyota 4Runner and look forward to many years of towing service with them.
by:
Wade
08/03/2026
Yes, plan on a good 5 hours to install. I watched several videos that made it look easy, but the smaller ones won't fold up like a hot dog. I ended up folding it at a diagonal after flattening, and it went in pretty easy. I also warmed them up in the hot sun which I think helped
NO SQUEAKING despite other reviews. I wonder if people that have squeaking issues used some kind of lubricant to get them in. I didn't use any lubricant, and have zero squeaks at any pressure.
NO SQUEAKING despite other reviews. I wonder if people that have squeaking issues used some kind of lubricant to get them in. I didn't use any lubricant, and have zero squeaks at any pressure.
by:
William
04/24/2026
Work well. 2022 Pathfinder pulling R-Pod 195. Issue was the Pathfinder has a soft rear & even w/camper & tongue weights well below max, had to use ball mount w/2” rise to keep camper level…& Pathfinder was riding nose-high. Post-install camper & Pathfinder both riding level & handling seems better. Amazed at how leak-proof these things are. We’re in northern WI w/a lot of zero degree winter days & no signs of bladder, hose or connector degradation. Highly recommend soaking bladders in hot water to provide flexibility because they were TOUGH to shoehorn into the springs. Once in though, I give them a firm thumbs up.
by:
Big-Foot Randy
09/29/2026
This is the 4th set of these bags I have installed. The kit is complete and instructions are good.
25
1325
true
Show More Reviews
See what our Experts say about this Air Lift Vehicle Suspension
Info for this part was:
Updated by:
Dan D
Updated by:
Wilson B
Updated by:
Noah M
Installed by:
Jeff D
Video Edited:
Dustin K
Edited by:
Daron K
Written by:
Alex H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
7/20/2026
Glad to hear they are making towing a more comfortable experience, Mark! Cool little camper as well! ^___^ Where did you guys take it?