bing tracking image
  1. Roof Rack
  2. Yakima
  3. Fit Kits
  4. 2 Pack
Landing Pad 10 for Yakima SkyLine and Control Towers - Qty 2

Landing Pad 10 for Yakima SkyLine and Control Towers - Qty 2

Item # Y00234
lowest price pledge
Retail:$87.90
Our Price: $71.95
You Save: 18%
Roof Rack

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.21 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Custom-fit Landing Pads allow you to attach Control or SkyLine Towers to vehicles with factory track racks. Landing Pads mount to existing tracks and combine with Control or SkyLine Towers to create a base for an aftermarket roof-rack system. Lowest Prices for the best roof rack from Yakima. Landing Pad 10 for Yakima SkyLine and Control Towers - Qty 2 part number Y00234 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (220)
  • Q & A (0)
  • Photos
  • Why etrailer?

Yakima Roof Rack - Y00234

  • Fit Kits
  • 2 Pack
  • Yakima

Custom-fit Landing Pads allow you to attach Control or SkyLine Towers to vehicles with factory track racks. Landing Pads mount to existing tracks and combine with Control or SkyLine Towers to create a base for an aftermarket roof-rack system.


Features:

  • Provide mounting point for Yakima SkyLine and Control Towers
  • Fit vehicles with factory track racks
  • Attach to factory tracks with anchor plates and screws
  • Include snap-on covers for protection when Towers are not in place


Specs:

  • Quantity: 2 pads
  • Lifetime warranty


8000234 LandingPad 10 for Yakima Control Towers






Customer Reviews

Landing Pad 10 for Yakima SkyLine and Control Towers - Qty 2 - Y00234

Average Customer Rating:  4.8 out of 5 stars   (220 Customer Reviews)

Custom-fit Landing Pads allow you to attach Control or SkyLine Towers to vehicles with factory track racks. Landing Pads mount to existing tracks and combine with Control or SkyLine Towers to create a base for an aftermarket roof-rack system.

by:

The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.


Comments
Still an outstanding product
Mark - 07/24/2021


by:

Landing pads are fine. We've been using with round bars to transport kayaks. No issues.




by:

Landing pads fit perfectly, easy to install. Would have been nice if shipping was just a little faster.




by:
2011 Honda CR-V

product came fast and works perfectly. Another excellent etrailer experience .




by:
Honda

The landing pad fit my Honda perfect.




by:

Trouble with web site but nothing a phone call couldn’t take care of




by:




by:




by:




by:

Review from a similar LandingPad in Roof Rack


I was seriously disappointed ?? the landing pads are not made for the Tacoma and sit on the roof with a gap that looks bad and will let water and trash into the bolt parts of the rack to roof juncture. For the amount of money it should be made correctly. I was also shocked to find that the landing pads upper parts were plastic… I have used Yakima for over 30 years and never expected a “cheap out “ like that! I was so disappointed I have never used the racks! They also only have provisions for one of the two bolts at each landing pad roof juncture. Disappointed ??!


Comments
I have a few questions about your 2016 Tacoma. Is it a double cab or access cab? Did you have a naked roof, factory raised rails, or factory roof rack?
-- Etrailer Expert Sierra K - 05/23/2022


by:

Review from a similar LandingPad in Roof Rack


They were relatively easy to install, I received them in short order and I am happy with their substantial construction. In short, I'm a happy camper. Thank you.




by:

Review from a similar LandingPad in Roof Rack


I recently purchased a rack system for my 1979 Ford Bronco to haul our new Kayaks. And believe me it was not easy to "fit" a vehicle as old as this.

I had some interesting challenges - my truck has a 3" lift and only clears my garage entrance by about 1.5 inches, so whatever I got had to be easily removable (at least in the front). I also wanted it to be multi functional so that I could carry other stuff as well, and the Yakima/Thule systems are great for that. Lastly, I wanted whatever I put on the truck to look good as I have put a lot of time and $ into fixing up this old truck and I didn't want it to look cheezey.....

Thanks to the good folks at etrailer I ended up with somewhat of a hybrid approach (my choice) but it worked out exactly as I envisioned it. I purchased the Thule Xsporter Pro system for the rear which works well with only minor modifications to the truck. I can lower it easily so I can get the truck into the garage without removing the system altogether. I really like that the tailgate is still functional with the system installed as some others I had in mind were bumper or hitch attached and would not allow use of the tailgate.... And, lastly it looks nice enough to just leave it on all the time.

On the front I chose the Yakima JetStream cross bar held up by a pair of Yakima SkyLine Towers and Landing Pads which I chose because I can easily remove the crossbar/towers to get the truck into my garage. The Landing Pads have covers for when not in use and are small enough to not be too noticeable.

I also added the security locks for peace of mind.

I have added 3 pictures, the first shows the Landing Pads without the towers & crossbar. You can also see the Xsporter Pro on the rear in its lowered position. The 2nd shot is a closeup of the Skyline Tower. The 3rd picture shows the entire system installed ready for my kayaks (or whatever).

Thanks again to the folks at etrailer for their expert advice and customer service.




by:

Review from a similar LandingPad in Roof Rack


Easy Install.

But, the instructions
tell you torque bolts to 48 in lbf or 5.4 Nm, with the L shape security wrench.
How do you apply a specific torque to a L shaped wrench?
Can't put a torque wrench on it.
My question and reason for 4 stars is for Yakima. Why not supply a preset torque driver like the one supplied for the Skyline Tower installation?

Overall I'm quite pleased.


Comments
Thank you for your review. That is a good question. I would use another wrench or hollow nut driver as leverage to tighten the L wrench down.
-- Etrailer Expert Sierra K - 06/03/2021


by:

Review from a similar LandingPad in Roof Rack


First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.




by:

Review from a similar LandingPad in Roof Rack


These will mount to the rhino rack tracks so I could use my Yakima control towers and rack.




by:

Review from a similar LandingPad in Roof Rack


Fit good with the OE track on roof. I like the new covers they supplied with the mounts.




by:

Review from a similar LandingPad in Roof Rack


Easy to order, best price. Not your fault due to supply chain was on back order. You followed through well. Appreciate not forgetting me or just telling me you cant get it. Nice work!




by:

Review from a similar LandingPad in Roof Rack


Great product as always with Yakima. Just be aware the towers are not included and they currently don't carry a tower for round bars.


Comments
Still working great, no leaks in camper roof!
Matthew - 04/08/2021


by:

Review from a similar LandingPad in Roof Rack


The Landing Pad 15 was exactly what I needed for 2019 Subaru Outback Yakima Sky Line Towers. I am 5'3" older lady and was able to install the entire system with Jet Stream crossbars without assistance, thanks to videos. (Yakimas instructions are photo only). But I really want to commend your company on the website, shipping, video tutorials, personalized communication, and follow up. Great job etrailer!




by:

Review from a similar LandingPad in Roof Rack


Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.




by:

Review from a similar LandingPad in Roof Rack


Have never taken out of the box. Can we return?


Comments
I apologize as our return policy is 60 days and it is too far past the time frame that we could make an exception. You may be able to sell them locally.
-- Etrailer Expert Jenny N - 08/05/2022


by:

Review from a similar LandingPad in Roof Rack


Installation was relatively easy, instructions were clear and easy to follow. These are medium duty mounts, secured by a single bolt per pad, and suitable for kayaks and other moderate loads on-road, which is exacly what I'm using them for. The manual specifically calls out against using these for off-road applications.
I'd suggest that anm installer cleans all surfaces to be sealed (bolt holes and the area around them)thoroughly with isopropanol to guarantee a long-term leakproof bond for the silicone sealant. Vibration, tensile and shear stresses, thermal cycling and other environmental factors really stress sealants in these sorts of applications.
All in all, I'm satisfied with the mount design's suitability for its intended application. I just wish Yakima would manufacture their stuff anywhere other than mainland China.




by:

Review from a similar LandingPad in Roof Rack


I bought a 2014 Jeep Grand Cherokee. To use my Yakima Skyline Towers, I had to install these landing pads in the rack rail attached to the roof. The installation was easy, and the pads serve their purpose. But they don't seem to be engineered as secure as I would like. They have more flexibility than I think they should. The bolt head is over an inch from where it screws into the roof. I think Yakima could have engineered something more secure. In fairness to Yakima, the Jeep rack rail is different than any other rack system I've seen and is incompatible with any other system. But I am assuming that these landing pads will work OK with a full load and that the Yakima engineers have done an adequate job. This summer they will be put to the test for 3,000 miles. Note: the Yakima windshield fairing falls on the glass in the moon roof rendering the moon roof unopenable so long as the fairing is used.




by:

Review from a similar LandingPad in Roof Rack


These Landing Pads are needed with the Yakima System to connect the Towers (which hold the crossbars) to the rails, which in my case are on top of my pickup canopy. There are many sizes of Landing Pads available, but the Landing Pad 1 I needed connects to the standard Yakima Rails. etrailer had them in stock when I needed them and shipping was fast and easy.




by:

Review from a similar LandingPad in Roof Rack


Was not a good fit for my TACO. Big gap between the side of roof channel. which allows water to group under there and could cause water on headliner if not 100% sealed with silicone.


Comments
Thank you for your review. A bit of a gap is a good thing to drain rainwater if necessary. I would not silicone it just in case water could be trapped. A little gap is necessary but if you have a large gap, please contact Customer Service.
-- Etrailer Expert Sierra K - 09/03/2021

25
220
Show More Reviews

See what our Experts say about this Yakima Roof Rack



  • Distance Between Mounting Holes on the Yakima Landing Pad 10
    I reached out to my contact at Yakima and they confirmed that the distance between the two mounting holes on the Landing Pad 10 for Yakima Control Towers # Y00234 are 2.75cm and the most narrow and 3cm at the furthest.
    view full answer...
  • Fit Kit Recommendation to Install Control Tower Roof Rack on 2009 Honda CR-V
    I checked with Yakima and the Landing Pad 10 is the correct pad to use with a Control Tower roof rack by Yakima on a 2009 Honda CR-V. We do still carry that as part # Y00234.
    view full answer...
  • Can the Yakima SkyRise Tent Be Used on a 2011 Honda CR-V
    According to the owner's manual for your 2011 Honda CR-V, the roof has a weight capacity of 165 lbs. Therefore, you can use a Yakima SkyRise Tent on your CR-V without any issues as it meets the minimum weight capacity requirement of 165 lbs. The Yakima SkyRise does have a 60 lb weight capacity but since the ladder will support much of the weight, the roof rack/vehicle only needs to be rated for 165 bs. In order to use the Yakima SkyRise on your CR-V you will also need an aftermarket roof...
    view full answer...
  • Recommended Yakima Round Bar roof Rack to Fit a 2010 Honda CR-V
    To mount Yakima round bars on your 2010 Honda CR-V you need SkyLine towers, part # Y00148, RoundBar adapters, part # Y03536, and landing pad # Y00234. Yakima suggests using 48 inch long round cross bars on the 2010 Honda CR-V. If your bars are not of this length, then the Yakima Round 8 Inch CrossBars, # Y00408, will be the correct bars. If your bars are longer they'll still work but will stick out further on the sides.
    view full answer...
  • Roof Rack and Kayak Carrier for 2011 Honda CR-V
    There is a roof rack fit for your 2011 Honda CR-V, which will have fixed mounting points to attach a roof rack (like in the accompanying photo). I recommend the Yakima Jetstream roof rack, which consists of Crossbars # Y00425, SkyLine Towers # Y00148 and Landing Pad # Y00234. This will give you a roof rack with aero bars to minimize the amount of wind noise and drag that you would encounter with other crossbar styles. You can then use the Yakima JayLow Kayak Carrier with Tie-Downs # Y04073...
    view full answer...
    Image 1 for
  • Will Thule Roof Cargo Basket Fit Crossbars for 2007 Honda CR-V
    The only roof rack we offer for your vehicle that will have a crossbar spread that is compatible is the Yakima kit that's part numbers # Y00425, # Y00148, and # Y00234. With this setup, you will sure be able to use the Thule # TH859XT. Take a look at the video of this rack on 2006 Honda CR-V
    view full answer...
  • Can Malone SeaWing Kayak Carrier Mount to the Outsides of Roof Rack Feet/Towers
    Yes you can mount the Malone SeaWing Kayak Carrier # MPG107MD to the outside of the towers/feet of your roof rack so that you can use the max amount of bar space available on your 2007 Honda CR-V with the Core Bar roof rack # Y00421, # Y00148, and # Y00234.
    view full answer...
  • Recommendation for Carrying Kayaks with a 2010 Honda CR-V
    The only option we offer for transporting kayaks with the hitch of a vehicle is a small trailer like the Yakima Rack and Roll # Y08106 which would give you crossbars to mount a kayak rack like the Yakima JayLow Kayak Carrier # Y04073. Since the trailer is pretty expensive I would think installing a roof rack on your 2010 Honda CR-V to then use with the JayLow would be a better option for you. For that you would then want the Yakima roof rack that consists of part numbers # Y00408, # Y00148,...
    view full answer...

Do you have a question about this Roof Rack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality roof rack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate roof rack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Tyler C
Written by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Jenny M
Updated by:
Jenny M
Employee Alex H
Updated by:
Alex H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390