To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 50" Long:Specs:
Inno Square Load Bars - Black - 50" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2017 Toyota Camry, we'll be taking a look at the Inno Aero Roof Rack System. Part number for our cross bar is INXB108-2, for our Inno Flush Feet we're using INXS200, and for our custom fit for our Camry we're using INK872. The Inno Aero Cross Bars are low profile, aerodynamic cross bars that allow you to carry any roof rack accessory on your vehicles roof. The cross bars help to reduce wind noise and drag giving you a smooth and quiet ride. The weather strip on the inside allows for use of channel mounted accessories. You would just push the weather strip down to insert that in which is also going to help reduce that wind noise and drag when you have those accessories on top. These cross bars also accommodate the clamp-on style accessories as well. The Inno Cross Bars allow you to open up space inside your vehicle by carrying all of your accessories on your vehicle's roof.
These cross bars have a 165 pound weight capacity and are very easy to install. We'll show you how to do that now. Everything that you see here on the table comes with the kit. The only thing that you'll need to provide yourself is a flat tape measure of some sort. Here what you'll see our fit kit. We'll have our clamp and our rubber bottom that's going to go on the bottom of our foot pack.
We have our foot pack here with our two locking covers. One for this one and one for the one we already have installed on our bar. We have our bracket that comes with our cross bar. That's going to be inserted into the flat to secure our foot pack to our cross bar. We have a set of keys that's going to lock on our end cap.
Our two included tools to torque everything down. Then of course the added tape measure. Now to start off our install, we're going to take our bracket. Slide out this center piece here. We're going to slip in our bracket. It's going to slide in, and we want it to slide all the way down until it hits this stopper.
Then we'll take our foot pack. We're going to start by undoing this bolt here. We'll take our metal clamp. Set that in place, and tighten that down just a few turns so that it stays in place. Flip that foot pack over. We'll take our pad. I'm just going to slip that on the bottom making sure that there aren't any holes and that it's completely secured down. Now we'll take the entire foot pack. We want to line up these two notches with the two holes. Slide that in place, and slide it all the way out. We'll take the larger of our two included allen keys, and we're going to tighten down this bolt on the inside here. This is going to help keep our foot pack in place, and prevent it from sliding along our cross bar. With that tightened down, we're ready to open up the doors on our vehicle. We can load up our cross bar. Now we can take our cross bar. We're going to lay it across our roof, and just position it near the position we need it when we actually install it. Now measuring from the center door jam to the center of our clamp here, we're going to have 36 centimeters. We've got that in place. We'll fix the other side, and then we'll double check our measurements. Now we can grab our included tool and start to tighten these down. We'll take our torque tool. I like to hold my clamp up against the door jam, and we'll just tighten this down until the clamp sits up against our door. Do the same thing to the other side. Now I like to go back and forth doing about five to ten turns on each side until we have enough torque behind our bolts. When you hear that clicking noise, that's when you know you have enough torque behind our bolt. We just want to make sure we have the same torque behind our other bolt, and we'll be ready to put on our locking covers. With our doors closed, we can take our locking covers, place those on, and lock them into place. Now we're ready to load up our gear and hit the road. That's going to be our completed look at the Inno Aero Roof Rack for our 2017 Toyota Camry.
Average Customer Rating: 4.7 out of 5 stars (401 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Really solid bars and end caps, not much more to say!
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
Easy to install and have worked great so far!
Super easy to install and remove. Lock feature is great
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
We planned to leave this on for a short time but it's so unintrusive and functional we've had it on the car for a year now. It works great, we've used it to attach a canoe to the car and we now have a rocketbox attached.
Perfection
Perfect fit.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
Well made, sturdy, thick and quality materials. Makes no noise at speed, no complaints thus far.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
It was easy to install. Seems to be very stable.
Installed on my 2009 Nissan Armada and it fit. If anyone owns an Armada you know that it takes a special kind of crossrail to fit over the large factory roof rails. This did the trick and was cheaper than the other websites. Arrived in less than a week. I’m happy
Works well. They have a rubber boot that goes over the open ends to keep them from making a whistle noise when driving. Don't lose those!
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.