See what our Experts say about this Inno Roof Rack

• Can Leg on Rola Roof Rack be Replaced for 2006 Honda Civic
  We do have the following parts still listed as replacement parts for a Rola roof rack: Replacement Cage Nuts part # 59710 Replacement Wrenches part 38371 Replacement Rubber Buffer Strips part 59846 (discontinued) Replacement End Support Covers part # 59887 For your application though if that leg is damaged badly then we need to get you a different roof rack. When I reached out to my contact at Rola he said that part has been discontinued so there aren't any replacements for you. If your...
  view full answer...
  
• Where to Install Feet of Inno Roof Rack on a 2014 Toyota Prius v
  I'll be happy to help you out with the installation of the Inno parts (listed below) on your 2014 Toyota Prius v: 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS200 Fit Kit - # INK870 For the front crossbar you will space the feet out at 20-1/2" and position the feet 2" in front of the door edge like you mentioned. For the rear crossbar you will space the feet out 20-3/4" and position the feet 25-1/2" back from the door edge. Attached is a snapshot of these specs out of the installation...
  view full answer...
  
• Inno Roof Rack Recommendation for 2008 Toyota Prius
  The Inno Aero Bar Roof Rack part # INXB108-2, # INXS200, and # INK705 is a great option for your 2008 Toyota Prius. It does come with locks and also the aero shaped bars help minimize wind noise. This rack does install using door clamps and the feet then rest on rubber pads on the roof of your vehicle. Over time these racks hold up just fine. I'd periodically remove the feet and clean them and the vehicle paint to prevent any scratching but even that is really unlikely. Value wise this...
  view full answer...
  
• 2021 BMW X3 Inno Roof Rack Options for Flush Factory Rails
  Yes, there are Inno roof rack fits for the flush rails on your 2021 BMW X3. I prefer the crossbars that overhang the legs instead of ending in them because you get more real-estate to work with but there is something to be said for the sporty look the latter offers. Below are the parts needed for either roof rack style for your vehicle. Flush Feet Style (Sporty) 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS400 Fit Kit - # INTR140 Through Feet Style (Standard) 54" Aero Crossbars...
  view full answer...
• Does Inno Roof Rack Fit 2015 Lexus GS 350 Without Doing Any Modifications
  Yep, it absolutely does; I verified for you with the manufacturer that the Inno roof rack does indeed fit a 2015 Lexus GS 350, including your F-Sport model, and you will not have to cut the bars or do any type of modification. For the complete roof rack on your Lexus, you will need the following parts: - Inno Aero Crossbars # INXB108-2 - Inno Flush Feet for Aero Crossbars # INXS200 - Custom Fit Kit # INK418
  view full answer...
• Flush-Mount Roof Rack Options For 2018 Honda Civic
  Since Thule recommends 53" crossbars for your 2018 Honda Civic, you will not want to go shorter. This is because going shorter could be too close to the mounting brackets and that will not provide sufficient room to install the Thule system onto the roof. Luckily, there is a flush-mounted system that will fit your vehicle, but not from Thule. If you have the hatchback then go with Rhino-Rack ROC25 Roof Rack # RR78TR and if you have the sedan then go with Rhino-Rack ROC25 Roof Rack # RR92XR....
  view full answer...
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Thule Flush Mount Roof Rack For 2005 Toyota Prius
  The Thule AeroBlade roof rack has been discontinued and replaced by the WingBar Edge, so there isn't a fit kit for those crossbars for your 2005 Toyota Prius. If you'd like a Thule flush mount roof rack for your '05 Prius you can use the Edge, which consists of Thule WingBar Edge Crossbar - Silver # TH23RE or Black # TH56FE, Edge Clamp Feet # TH79SC, and Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet # TH145181. This is a premium option so if you'd like something that is still...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for a 2019 Honda Civic Coupe
  For your 2019 Honda Civic Coupe I recommend going with the Inno roof rack that uses the Flush Feet because it is the only roof rack that currently fits which has a great OEM look with the aero-style bars. The parts that you need for this are the 42" crossbars # INXB108-2, Flush Feet # INXS200, and Fit Kit # INK683. This system comes with locks to secure it to your roof and a 100 lb weight capacity that allows you to carry your kayak. Then for a kayak carrier I highly recommend the Yakima...
  view full answer...
• Will the Q-Clips Q-102 fit Older Yakima Q-Towers
  I spoke with my contact at Yakima and he informed me that the discontinued Q102 Q-Clips that you referenced will work with the Q-towers you bought around 2001. He also said that for your 2004 Chevy Malibu Maxx you would need two sets of these clips, and as long as your crossbars are long enough you would be good to go. The recommended crossbar length for your vehicle is 58 inches. If your current bars aren't long enough and you needed a set you would want the Round 58 inch Crossbars part...
  view full answer...
• Roof Rack For 2018 Honda Civic Coupe With Sunroof To Carry Kayak
  You can carry a kayak on a roof rack on the 2018 Honda Civic Coupe with a sunroof as long as you do not try to open the sun roof while you are carrying the kayak. I recommend Inno Aero Aluminum cross bars part # INXB108-2 with Inno Feet part # INXS200 and fit kit part # INK683. The Aero bars of the Inno system will help cut down on wind noise. To carry the kayak I recommend Yakima JayLow part # Y04073 because it allows you more space on the roof for other gear because the kayak sits...
  view full answer...
• Recommended Roof Rack for a 2016 Honda HR-V
  We have a few roof racks to fit your 2016 Honda HR-V with a naked roof. I recommend the Inno Aero Roof Rack consisting of the 42" Crossbars # INXB108-2, the Inno Feet # INXS200 and the Inno Fit Kit # INK878. I recommend this rack because it has an OEM look as the Aero bars do not extend past your roof for a clean, tight fit. Also, the elliptical shape helps to create an aerodynamic system with no need for a fairing. This bar is 42" long and can support 165 lbs. However, be sure to consult...
  view full answer...
• How to Carry Surfboards on a 2018 Honda Civic Si Coupe
  In order to carry surfboards on the roof of your 2018 Honda Civic Si Coupe you are going to need a roof rack and surfboard carrier. For the roof rack, I recommend the Inno Aero Crossbar System which is composed of part # INXB108-2, part # INXS200, and part # INK683. This system has aero crossbars for reduced wind noise/drag with integrated t-slots. Then for the surfboard carrier I recommend the Inno Locker Watersport Carrier part # INXA445. This system utilizes the track system listed...
  view full answer...
• How to Carry Two Kayaks on a 2014 Kia Sorento LX
  The Inno Roof Rack, # INXB108-2, and # INXS100 is a good roof rack for your 2014 Kia Sorento LX with the flush mount factory side rails. The kayaks may not fit if you just lay them down side by side on the crossbars, so I recommend using a 2-kayak carrier like the Malone 2 Kayak Carrier, # MPG115MD. This carrier will hold the kayaks on their side and it is compatible with the Inno crossbars. You could also use a post-style carrier like The Stacker, # TH830, from Thule. We have demonstration...
  view full answer...
• Custom Fit Low Profile Roof Rack System For A 2016 BMW X5
  I have the perfect roof rack for your 2016 BMW X5 that matches all the requirements you have specified. For a roof rack with aero crossbars and no overhang, you will want the Inno Aero Crossbars part # INXB108-2, part # INXS400, and part # INTR140. The Inno Aero Roof Rack System is a direct fit for your vehicle and the cross bars that mount to the vehicle's side rails are placed into the end caps on the foot pack included with this kit. This will in turn position the crossbar ends directly...
  view full answer...
• Carrying a Kayak on a 2007 Honda Civic Sedan
  For your 2007 Honda Civic, you'll want to keep it simple, as the height of the car means there's no reason to go with bigger, expensive load assist carriers. Since it sounds like you are just looking to carry a kayak, a simple, easy to remove roof rack is the best pick. Prior to using the roof rack, you'll want to verify your roof capacity with your owner's manual or manufacturer. This capacity will include the weight of the kayak, carrier and roof rack, and will be limited by the lowest...
  view full answer...
• Will A Roof Rack On My 2019 BMW X3 Interfere With My Sunroof Operation
  Any aftermarket roof rack you purchase for your 2019 BMW X3 with flush rails may have issues with interference between the roof rack and the sunroof. In fact, this interference is mentioned in all roof rack instruction manuals. My recommendation for customers who want to know if there will be interference is to put your front crossbar and tower/feet/legs together and place it on the roof in the correct position. Do not install it, just put it in place on the roof. Then CAREFULLY open your...
  view full answer...
• Roof Clearance for ROC25 Roof Racks and Finding Compatible Cargo Boxes
  The Rhino-Rack ROC25 Roof Rack # RR78TR is a newer system designed to be extremely low profile. The exact roof clearance depends on how much your roof slopes. When we installed this on a 2019 Nissan Rogue, we found the clearance from the roof to the bottom of the FRONT bars to be 1-1/2 inches at the center of the roof and 2 inches near the towers. The rear bars only had a half inch of clearance! I attached the review video at the bottom of the page if you want to see it in action. We played...
  view full answer...
• Roof Rack for a 2017 Honda Civic LX Coupe
  The 2017 Honda Civic LX Coupe doesn't have a lot of fits available for it, but Inno makes a pretty solid range of fits for your vehicle. I recommend their aero bar kit, consisting of: Inno Aero Crossbars, 42 inches, Black, part # INXB108-2 Inno Flush Feet for Aero Crossbars, part # INXS200 Custom Fit Kit for Inno Racks, part # INK683 The shape plus the C-Channels let you use a variety of accessories and cargo solutions. I recommend verifying the roof capacity of your vehicle with...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2019 Honda Civic Coupe
  In keeping with the sporty look of your 2019 Honda Civic Coupe I recommend going with the 42" Inno Aero Crossbars # INXB108-2, Flush Mount Feet # INXS200, and Fit Kit # INK683. This is the only roof rack that currently fits where the aero-style bars end inside the feet which gives you a great OEM looking roof rack with a 100 lb weight capacity. Another great feature of this roof rack is that the feet come with locks so that you can deter theft of both your roof rack and any accessories...
  view full answer...
• Best Aero Roof Rack and Rooftop Cargo Box Fit for 2019 Honda Civic 2-Door Coupe
  For your 2019 Civic 2-door coupe the roof rack I recommend is Inno's Flush Aero rack made of parts # INXB108-2, # INXS200 and # INK683. You may not know the Inno name but they are the major player in OEM roof racks for many popular vehicles like Subaru, Toyota and Honda. Their racks are well made and well priced. This Flush Aero rack features aerodynamic wing-like cross bars that cut through the wind better than other shapes which means they will make less noise. The bars terminate in...
  view full answer...
  
• Recommended Roof Rack For 2006 Honda Civic 4-Door
  For a nice looking roof rack on that is designed for your 2006 Civic I recommend the Inno Roof Rack, part # INXB108-2, # INXS200, and # INK326. This roof rack features low-profile crossbars that do not extend past the feet, giving a more "factory" look.
  view full answer...
• Roof Rack and Bike Rack for 2019 Honda Civic
  Yes! The Inno Roof Rack Fit Kit for 2019 Honda Civic # INXB108-2, # INXS200, and # INK684 is a great roof rack. Even if you did not link it in your question, this would have been my first suggestion for how it meets your specific needs: not damaging for the car, good for long distances, durable, and cost-effective. The clamps # INK684 are fitted for each specific vehicle model so, if installed correctly, will fit into the grooves in a way that will NOT damage your car. I often purposely...
  view full answer...
• Is Inno Roof Rack for 2006 Chevy Malibu Compatible with Thule Roof Motion XT Cargo Box
  Yes the Inno Roof Rack part numbers # INXB108-2, # INXS200, and # INK521 that fits your 2006 Chevy Malibu is perfectly compatible with the Thule cargo box part # TH629506.
  view full answer...
• Thule Flush Roof Rack For a 2017 Lexus RX350 with Factory Flush Rails
  I do have Thule options for a 2017 Lexus RX 350 with flush rails but the Thule AeroBlade Edge is an old system that we no longer carry the correct fit kits for. Instead, I recommend the Thule WingBar Evo Crossbar part # TH711220, part # TH710601,and part # TH186044 which has the updated design. I know this system doesn't have the flush bar style you were after but they don' stick out much further at all and they allow for more items to be carrier. It can also be easier removed when not...
  view full answer...
• What Crossbar System do You Recommend that Doesnt Extend Past the Feet on My 2018 BMW X1?
  I have a great flush crossbar system for you. Unfortunately, I confirmed with Thule that they discontinued the Fit Kit 4023 which is required to mount the AeroBlades TH7602B-TH7603B to your 2018 BMW X1. Without that fit kit, there is no way to attach the AeroBlades to your flush rails. We also do not have any other Thule systems that do not extend past the feet that fit your flush rails. With that being said, the only other option for a crossbar system for your X1 that does not extend...
  view full answer...
• 2021 BMW X3 Inno Roof Rack Options for Flush Factory Rails
  Yes, there are Inno roof rack fits for the flush rails on your 2021 BMW X3. I prefer the crossbars that overhang the legs instead of ending in them because you get more real-estate to work with but there is something to be said for the sporty look the latter offers. Below are the parts needed for either roof rack style for your vehicle. Flush Feet Style (Sporty) 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS400 Fit Kit - # INTR140 Through Feet Style (Standard) 54" Aero Crossbars...
  view full answer...
• Is the Custom Fit Kit for Inno IN93FR the Same as the TR183 for an Inno Rack on a 2020 Ford Edge
  I will start with the good news, the Custom Fit Kit for Inno # IN93FR is the TR183. The TR183 is the manufacturers part number and the IN93FR is our number for the same TR183. From there you will use the Inno Through Feet for Aero Crossbars # INXS450 for either the Inno Aero Crossbars # INXB123-130 (48" & 51") or # INXB130-138 (51" & 54"), the difference is the length of crossbars. The third option you mentioned use the Inno Flush Feet for Aero Crossbars # INXS400 and the Inno Aero Crossbars...
  view full answer...
• Recommended Roof Rack and SUP Carrier for a 2015 Mini Cooper Countryman
  Yes Nathan it would be possible, and you could use the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR142, Inno Flush Feet for Aero Crossbars # INXS400, and the Inno Aero Crossbars # INXB93-2 you're looking at. From here you can use a SUP carrier like the Thule SUP Shuttle Stand-Up Paddleboard Carrier with Tie-Downs # TH811XT which can carry up to 2 SUPs that are 34" wide.
  view full answer...
• Custom Fit Low Profile Roof Rack System For A 2016 BMW X5
  I have the perfect roof rack for your 2016 BMW X5 that matches all the requirements you have specified. For a roof rack with aero crossbars and no overhang, you will want the Inno Aero Crossbars part # INXB108-2, part # INXS400, and part # INTR140. The Inno Aero Roof Rack System is a direct fit for your vehicle and the cross bars that mount to the vehicle's side rails are placed into the end caps on the foot pack included with this kit. This will in turn position the crossbar ends directly...
  view full answer...
• Will A Roof Rack On My 2019 BMW X3 Interfere With My Sunroof Operation
  Any aftermarket roof rack you purchase for your 2019 BMW X3 with flush rails may have issues with interference between the roof rack and the sunroof. In fact, this interference is mentioned in all roof rack instruction manuals. My recommendation for customers who want to know if there will be interference is to put your front crossbar and tower/feet/legs together and place it on the roof in the correct position. Do not install it, just put it in place on the roof. Then CAREFULLY open your...
  view full answer...
• Roof Rack Recommendation for a 2015 Audi Q7
  It looks like the 184002 fit kit from Thule has been discontinued so while the Thule AeroBlade Edge # TH7602-TH7602 is still a valid part, this means that we will need to go a different direction for your 2015 Audi Q7. I recommend going with the Thule WingBar system because it is the upgrade to the AeroBlade Edge, but if you're more concerned about a roof rack that has crossbars that end in the legs then you'll need to go with the Inno roof rack instead. I will list both options below...
  view full answer...
• Recommended Roof Rack for 2016 Lexus NX 200T with Flush Mounted Rails
  We do offer a wide array of roof racks that are confirmed to fit the 2016 Lexus 200T vehicles. The only model I could find that has the flush mounted rails like you mentioned in your question is the NX 200T. If this is your model Lexus, the most cost-efficient crossbars and fit kit we currently have available is the Inno Aero Bar Roof Rack, which consists of parts # INXB93-100 for the two aero crossbars (front crossbar is 36 inches and rear cross bar is 39 inches), # INXS400 for the Flush...
  view full answer...
• Will Inno Square Bar Roof Rack Fit A 2018 Mercedes GLA45 AMG
  Yes, the Inno Square Crossbar Kit including parts # INB117, # INXP, and # INTR162 are a confirmed fit for your 2018 Mercedes GLA45 AMG. We can't recommend using duct tape between the mounting feet and your factory rails. The rack was designed to fit to the factory flush mounted rails so an additional material between the two could affect it's hold and reliability. These feet are designed to fit without scratch or damage so you can feel good about this solution. I have also included...
  view full answer...
• Available Inno Roof Rack Fits for 2018 Honda HR-V with Flush Roof Rails
  We offer three roof rack systems from Inno that fit the 2018 Honda HR-V with flush mount roof rails. Please note that none of these are square bar racks; all use Inno's Aero crossbars, which for your vehicle are available in three bar lengths. You can see all of these on the linked page. With these racks you have a choice of a flush fit for the Aero crossbars with the rack feet or to have longer bars that extend out past the rack feet. The flush system uses 39-inch bars and consists of...
  view full answer...
• Flush Mounted Roof Rack for 2018 Audi Q5
  Roof racks are custom fits for vehicles, and the Thule rack you mentioned is an entire kit and won't fit on your 2018 Audi Q5, although there is a rack with the same style which does. So long as you have flush-mounted rails there is a rack from Inno which has crossbars match the width of your Audi's roof: - Inno Aero Crossbars # INXB100-108 - Inno Flush Feet for Aero Crossbars - Flush Side Rails # INXS400 - Custom Fit Kit for Inno # INTR138 For a Thule roof rack, they have a style where...
  view full answer...
• What Flush Crossbar System do You Recommend for My 2022 Mercedes GLC SUV with Flush Rails?
  From my available specs on your 2022 Mercedes GLC SUV, you have flush mounted factory rails on your roof. For a great flush roof rack system of crossbars that don't extend past the roof rails, there is one that fits your vehicle style. For that route, I recommend the following setup: - Inno Aero Crossbars - Aluminum - Black - 36" Long and 39" Long # INXB93-100 - Inno Flush Feet for Aero Crossbars - Flush Side Rails # INXS400 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR,...
  view full answer...
• Is The Sportsrack J-Style Kayak Carrier SR5511 Compatible With 2010 Santa Fe Roof Rack?
  The SportRack Kayak Carrier with Tie-Downs - J-Style # SR5511 will fit your 2010 Hyundai Santa Fe if it has the factory crossbars running left to right across your roof. If your vehicle just has the factory side rails running front to back then you will first need to install a crossbar setup such as Inno Aero Crossbars # INXB100-108 with the necessary Feet # INXS400 and Fit Kit # INTR166. I attached a couple demonstration videos for you.
  view full answer...
• 2021 BMW X3 Inno Roof Rack Options for Flush Factory Rails
  Yes, there are Inno roof rack fits for the flush rails on your 2021 BMW X3. I prefer the crossbars that overhang the legs instead of ending in them because you get more real-estate to work with but there is something to be said for the sporty look the latter offers. Below are the parts needed for either roof rack style for your vehicle. Flush Feet Style (Sporty) 42" Aero Crossbars - # INXB108-2 Flush Feet - # INXS400 Fit Kit - # INTR140 Through Feet Style (Standard) 54" Aero Crossbars...
  view full answer...
• 2022 BMW X3 Roof Rack and Fishing Rod Carrier Options
  The fishing rod carriers we have are universal mount options but to use them with your 2022 BMW X3 we need to get a roof rack on your vehicle and for that I recommend the Inno Aero Roof Rack System which uses the following: 54" Inno Aero Crossbars - # INXB138-2 Through Feet - # INXS450 Fit Kit - # INTR140 Now that you have a roof rack we can look at various options like the Rhino-Rack 4 Rod Carrier # RR572, the Yakima TopWater # Y04088, or the Thule Rod Vault # TH87YV for fly fishing...
  view full answer...
• Which Inno Roof Rack System for 2017 BMW X5
  Yes. The Inno Roof Rack System that uses parts # INXB138-2, # INTR140 and # INXS450 is the correct fit for your 2017 BMW X5 and has been confirmed. I've linked a photo of the way these attach to the rails and you can see the clamp that will attach to the outside of the flush mounted rails on your X5, and provide a secure fit.
  view full answer...
  
• Custom Fit Low Profile Roof Rack System For A 2016 BMW X5
  I have the perfect roof rack for your 2016 BMW X5 that matches all the requirements you have specified. For a roof rack with aero crossbars and no overhang, you will want the Inno Aero Crossbars part # INXB108-2, part # INXS400, and part # INTR140. The Inno Aero Roof Rack System is a direct fit for your vehicle and the cross bars that mount to the vehicle's side rails are placed into the end caps on the foot pack included with this kit. This will in turn position the crossbar ends directly...
  view full answer...
• Will A Roof Rack On My 2019 BMW X3 Interfere With My Sunroof Operation
  Any aftermarket roof rack you purchase for your 2019 BMW X3 with flush rails may have issues with interference between the roof rack and the sunroof. In fact, this interference is mentioned in all roof rack instruction manuals. My recommendation for customers who want to know if there will be interference is to put your front crossbar and tower/feet/legs together and place it on the roof in the correct position. Do not install it, just put it in place on the roof. Then CAREFULLY open your...
  view full answer...

Do you have a question about this Roof Rack?