To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If body roll or lean makes every turn feel like extra work, this 1-1/2" diameter front sway bar keeps things under control. It ties the front axle to the chassis, balancing weight transfer so you can corner and maneuver with confidence. The result is a more planted, level ride that handles quick direction changes and uneven pavement without the usual rocking or sway.

Hours behind the wheel can wear you out when your steering constantly needs correction. By cutting down side-to-side movement, this bar helps keep your line steady through crosswinds, passing traffic, and shifting loads. The drive stays level and predictable, so you stay relaxed and focused instead of fighting the wheel.
This isn’t mild steel—it’s 4140 chromoly, a hardened alloy that’s much tougher than the 1020 steel found in typical setups. Combined with the larger 1-1/2" diameter, it resists torsional flexing nearly 30 percent better than standard sway bars. You feel the difference in how solid and composed the suspension stays when the road gets rough.
Instead of rubber, the system uses polyurethane bushings that stand up to oil, gasoline, and ozone. They hold their shape over time, so there’s less give and more consistent support. That means smoother articulation and fewer signs of wear even after plenty of miles.

No drilling required. The bar mounts directly to the front axle and chassis using the included heavy-gauge hardware and bushing lubricant. It’s designed to work cleanly around most aftermarket suspension parts, making setup straightforward and dependable right out of the box.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Roadmaster front anti-sway bar. Now this is a custom fit part. It is designed to fit the 2009 to 2012 Ford F650 and the F650 Cutaway models. Also fits the 2003 to 2019 Navistar 4200, 4340, 4400 models, and the doer 00:00:26 star model.
And on a custom fit part like this, I always like to recommend for you to go to our website, use the fit guide, put in your year, model vehicle and it'll show if this'll work for your application.Now this will minimize side to side movement, improves overall stability of your vehicle. It'll help let you execute turns and quick maneuvers with confidence. Allows for a nice level ride, even on irregular surfaces. And will even help reduce driver fatigue, because it'll minimize the effort required to keep your vehicle in line. Does diminish any effects of cross winds, passing motorists, shifting cargo.And as I mentioned, it is designed to fit your vehicle and work in conjunction with its suspension system.
Basically, it attaches to the front axle and to the chassis, and it uses the weight of that axle to brace the frame as it shifts and turns. And this bar is engineered to avoid interference with most popular aftermarket add-ons and accessories. If you notice it does come with the polyurethane bushings, instead of the standard rubber variety. Gives you a lot longer lasting system.The polyurethane is durable and resistant to damage that can be caused by oil, gas, and ozone. And of course less wear will mean less give in the system and better support.
The bar itself is constructed of a thick 4140 chromoly steel for superior strength. The diameter on this bar is 1-1/2 inches. And it does include everything I laid out here on the table, all the mounting brackets, all the heavy gauge mounting hardware, nice set of easy to follow instructions. And they do even give you a little tub of bushing lubricant that you want to apply to all the bushings when you go to install this.Now this front bar will work with a rear anti-sway bar for absolute stability. We do sell the rear bar separately.
But you do want to again, check our website and the fit guide because it is available on certain applications only. This part is made in the USA. But that should do it for the review on this Roadmaster front anti-sway bar..
Ratings & Reviews

Fred
8/15/2026
Excellent it works great


Gwendolyn Y.
4/8/2025
No more white knuckling! That's awesome to hear, Kris. I'm glad that this bar helped so much so you can have a more relaxed drive :)

Kris
3/17/2026
I have taken a few trips with the Clatter Cabin now. It’s been enjoyable to drive. Since then I have replaced the exhaust from the engine back with 2 12 inch pipe. I was able to get the pre bent exhaust parts over the axle and clear your rear sway bar nicely. Now she purrrrs!

Kate F.
9/24/2025
Install looks great Steven! I can't wait for you to take it out for a spin so you can see the difference for yourself, it is amazing what a upgraded sway bar does to your ride, no more white knuckles for you, or your wife. What big stops do you have planned on your trip to the West Coast?

Ken
8/19/2025
No complaints with the handling. This is a good sway bar!

Jenny N.
6/25/2024
What I recommend is touching it up with a rust resistant paint like Rustoleum. We will be in contact with you about the damage. Please keep an eye on your email.

Leonard
6/22/2025
After a year and many miles I would give it a five star for sure. Made a great improvement over the stock anti-sway bar. With the rear and front RoadMaster anti-sway along with the RoadMaster steering stabilizer the E-450 33 foot class C motorhome drives like a dream. I highly recommend these three products. If not all at once then this order, 1st rear anti sway bar then 2nd front and then the steering stabilizer with the spring on it.

Dan K.
4/22/2026
wondaful! highly recommended.

Gwendolyn Y.
4/28/2025
High-five on the install, Curtis! Also, thanks for sharing all the pictures and showing all the angles of the sway bar. They are really helpful for anyone looking to tackle this install themselves at home!

Brooke M.
6/17/2025
So glad to hear that, Dimitrios! Thanks for including a photo, too.

Michael
3/25/2026
After a year the system is working great. It has made the driving much safer and smoother.


Gwendolyn Y.
3/7/2025
Sounds like a much smoother drive, Riley! I looked up your camper to see how tall it is and I can see exactly why its called a Bigfoot. What's been your favorite place you've traveled to so far with the camper?

Riley
3/6/2026
The two Roadmastercsway bars weve been using continue to impress and perform like they did on day one. Driving back across the country with some days having stiff criswinds continually we rode comfortably and never had handling or steering issues. I remain adamant that these are undoubtedly the best products on the market for this application and welcome any questions. For reference my truck is a 2018 F350 crew cab DRW, 6.7 diesel 4x4 long bed with Bigfoot 3000 series truck camper. Get the Roadmasters!
Do you have a question about this Anti-Sway Bar?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Matthew
10/7/2026
This is a complete game changer when using a truck camper Mine is an Arctic Fox 990. I would list this under a must have accessory when using a truck camper. Unloaded ride when you hit off camber bumps is slightly rougher, but hey its a Ram 3500 dually for hauling heavy stuff. Also the performance when carving twisty canyons with an empty truck is astonishing....Watch out Corvetts, here I come!