Pull-down spout on this kitchen faucet rinses tough food residue off your plates and then self-retracts with the adjustable hose weight. Low-flow aerator conserves your water supply by reducing the flow of water without compromising water pressure.
Features:
Specs:
Pull the spout down so you can easily tackle that food caked onto your plates or rinse the sides of the sink from any angle. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose.
To install, use the inlet shank and drop the new faucet in place of your existing faucet. Then tighten the mounting nut onto the shank so that the washer is in between the nut and the underside of the counter. Finally, install the hose weight, thread the pull-down head's hose onto the faucet's center inlet, and connect the braided hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Ultra Faucets side-lever kitchen faucet. The unit's made from a metal construction. It's going to feature a really nice brushed nickel finish, gives the unit a very clean look. Now here on the side we're going to have a nice handle, single handle, that allows for easy control. You pull it away to turn the water on and then rotate to achieve hot or cold water. It does have the hot and cold indicators on there. The unit's got the nice tall design with the curved spout.
Come to this point right here which is the head where the water comes out. This is going to be our pull down spout. It's going to offer 2 functions. You've got the control switch right there to choose between the functions. You're going to have consistent flow and spray.
Right here at the center you can see that it has the low flow aerator that's going to help reduce wasting water. We're going to have the spray pattern going around the perimeter there. When you're done with it, it's going to retract back into the faucet housing. Push it up there and that's going to lock in position. Really nice design, very clean look. Few measurements I want to go over.
Starting with the base, this is going to give us a diameter of about 2 and 1/8th of an inch measuring here at the very bottom. I took a measurement from the very back of the unit to the very front at a straight line. That's going to measure about 11 inches. From the center of where it mounts to the center of where the water comes out, that's about 9 and 1/4 inches. We'll take a look at the overall height.
To the tallest point, that's going to give us a measurement of about 16 and 3/4 of an inch. We can also take a measurement of the counter-top height, measuring from the counter-top to the closest point of the faucet, and that's going to give a measurement of about 8 and 5/8ths of an inch. Now that we've seen everything up here let's go ahead and take a look at the under side of the counter-top so we can see how it installs. Now you will notice that this only requires one hole for an installation. I have it mounted in the hole that has a diameter of about an inch and a quarter. You'll notice the threaded portion right here, we've got plenty of length left over so this is designed to fit a variety of counter-top thicknesses. Up here we're going to have a metal flat washer and then we're going to have the nut with the set screws. Tighten all that to get the unit fully installed and secured to the counter-top. Really nice easy design. We're going to have all of our connectors coming out the bottom here. This hose right here is going to be the hose for the pull down spout, it loops around, connects back to itself, nice little threaded design there. Then we're going to have the connection points for the hot and cold water lines. The hot water line's going to have red braided into the hose, cold water line's going to have blue braided in. The connectors on these, these are going to be our male connectors. Outer edge to outer edge they give us a diameter, from the outside threaded portion to the same point on the other side, 13/16ths of an inch. Also on the hose for that pull down spout we're going to have an adjustable weight so you can adjust this if you need more hose length. This also adds weight to the hose, that way it has that self-retracting design and the pull down spout retracts back into the housing and then stays put. That's going to do it for today's look at the Ultra Faucets side-lever kitchen faucet.
Fast delivery, great price, will work perfectly
Thank you
This faucet is beautiful. Very easy to install.
It is built strong. Thankyou
It did not fit . Still sitting in my garage.
This faucet is awesome, nice well built quality. Glad I ordered it and Heidi is great to work with! Would recommend this faucet!!
It is a fine faucet, but it is just an ordinary faucet that you could buy about the same thing at any Home Depot or Lowes, and pay much less in my opinion.
It's metal!!! not cheap plastic like what comes in a RV. Impressed has the feel and quality of a nice household faucet.
Bought because it was exactly the same as what we had. I had to have someone with the tools to install it. It works fine we just have to keep tightening it.
fast service, well packaged & protected, Thank you for the service.
Awesome faucet! Kinda pricey for what is essentially the same as a house faucet.
Didn’t receive and kind of paper work or warranty info
This item was exactly what I needed to replace, and upgrade from, the stock faucet in my 2015 RW425RT. The installation was straight forward and did not require the expertise of a plumber! Looks good, easy to use, everything I expected.
Customer service response to my questions was excellent. Although not installed yet in my Forest River 5th wheel, the overall construction of this faucet looks to be of very high quality at $40.00 less than similar products on other web sites. The O.E.M. faucet in my 5th wheel is made of "non-metallic" construction and the faucet broke after 4 years of use. This faucet (handle and water spout) is made of real metal. The only possible issue is that the pull down portion of the faucet is made of "non-metallic" material, but since this portion of the faucet doesn't require to be as "strong" as the water lever and faucet spout it should be as susceptible to breakage as a non-metallic lever. Overall, this is an excellent product and service was superior.
I needed this specific faucet and found it online at etrailer.com. Carol C. did a very good job working with me. She called me to report that the manufacturer was needing to produce more and she asked me if I was willing to wait a short time for it. I said yes because I needed this exact faucet. Then I was pleasantly surprised to get the faucet shortly afterwards. The service was great and the faucet installed easily and performed as expected.
Great job to etrailer!
The faucet installed easily in our RV and it seems to be of good quality. I was surprised by the packaging. It had no original boxing but rather individual pieces were loosely placed in a packaging box, causing me to wonder if this had been a returned item that no longer had the original packaging. Fortunately, all the pieces were present and the faucet seems to work well.
The faucet has performed as expected for nearly a year now. The only complication occurred during installation. The round hole in the countertop was slightly too small, about 1/16”. Thankfully I had a large round file that I used to enlarge the hole.
The pull out sprayer head has remained well fitting in the faucet neck. We are glad we installed this faucet because it gives much more clearance over the sink bowl than the original faucet.
It was well worth the expense and effort, and we’d both buy it again and recommend it.
We have a 2014 Keystone Cougar 5th wheel trailer that we bought new. At the time, one of the things we disliked was the kitchen faucet and sink. We decided to replace both of them. This Ultra Pull-down Faucet is just what we always wanted. It works wonderful.
The first photo is the before photo of the old fashioned two handle faucet. The other photo is the after photo of the new single handle faucet (and single basin sink).
This is a great faucet but there were no installation instructions in the box and some of the hardware was missing. Did I get someone else's return? Anyway, it wasn't hard to figure out how to install it and the local plumbing store had the hardware I needed.
After purchasing a residential faucet from a national home improvement chain I had to return it after a frustrating experience with connector hoses and adapters that did not work in my Class A motorhome. This faucet fit perfectly, no adapters or extra hoses necessary, and no frustration at all. It was an extremely simple install. The faucet is modern and stylish with smooth stream-to-spray mode operation. It was a perfect choice for us (that means the wife loves it.)
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.