You turn on the faucet and the water lands where your hands are, so you can wash without pressing them into the back or bottom of the sink. This vessel-style design positions the flow higher, and the single lever gives you control in one motion.
The spout sits higher in the sink area so the water stream meets your hands instead of hitting low in the basin. That extra clearance changes how you use the sink, especially when washing or rinsing without pressing into the back or bottom. You get usable space under the flow instead of working around it.
Small adjustments can shift temperature quickly when both hot and cold run through one control. The single lever handle adjusts flow and temperature from one point using a ceramic disc cartridge. You can move between settings without switching between handles, so changes happen in one motion at the sink.
The ceramic disc cartridge seals at the control point instead of relying on flexible seals that wear out. This creates a watertight seal when the faucet is turned off. When you shut it down, the flow stops and stays off, so you are not coming back to a slow drip in the sink.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here at etrailer. Today we're taking a look together at the B&B Molders Icon RV bathroom vessel sink faucet. Now, folks, this is considered a single lever handle. And as you can see, it's a nice, matte black finish. Now this is gonna be a great upgrade for your bathroom vessel sink faucet in the RV, camper, or even trailer, depending on where you're putting it.
And like I mentioned, it's considered a single lever, obviously, one lever, and then you can simply rotate that up or down to turn on or off, and then, obviously, to get your hot and cold. Now I've got it set up on the box here today so you can kind of see what it would look like. And I don't have it totally tight here, obviously, but you have this main ring here and then there's some washes underneath there. And then you will tighten all this up once you get it installed. And then you'll set these two set screws here to finish off the tightening.
One thing I like is that they do give you these braided hoses, so they're not those cheaper ones that are out there on the market. And these are nice and sturdy, and they have red lines for the hot water and blue lines for the cold water. So they're very clearly marked and it's a very simple installation. Now that being said, if you don't wanna do the install, you don't know how. No problem.
You can reach out on our website, etrailer.com. We have an installation or installer locator link. You can simply enter your ZIP code and we can help find an installation professional that's trusted by etrailer in your area to help you get that install done. Now as you can see, it's considered a high-rise spout, so it should give you some extra clearance on your sink to get your hands down in there. I know with me that's a big problem.
I got big hands. I like sinks that have these taller spouts, personally. It's just a lot easier to wash my hands and I feel I can get in there a lot easier. And then of course, you got the low-flow aerator. That's gonna help conserve your water without compromising any kind of water pressure. And this whole unit is a zinc and alloy construction. Again, with that matte black finish. It only requires one hole. My demo box here has three holes, obviously, for other kind of faucets we carry, but you only need one hole. This will work perfect for you. You will also need some tile and tub caulk sold separately, or you can source it locally as well. Folks, that's gonna wrap up our quick look together at this B&B Molders bathroom vessel sink faucet. I'm Steven, thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.