Arrives before Christmas 
Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, maple finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e82CR, e72CR) and a dual leg kit (e43BR, e35BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Replacement etrailer 38 inch by 30 inch Maplewood RV Dinette Tabletop with the black trim. Now this part will replace or upgrade the tabletop that's on your etrailer RV Dinette Table, or it can be used with other Dinette brands of the same size. This one's designed to work as a direct replacement for the etrailer dining tables, part number E72CR and E82CR. Both of those we do sell separately on our website.
Now this is just for the tabletop. It will require one or two table leg kits for complete setup. We do sell those separately on our website. If you need a flush mount table leg kit that's part number E69RR. If you need the surface mount table leg kit it's part number E79RR.
Now you can see this has a nice Maplewood grain laminate which provides the perfect accent color for your existing decor. The black edging, we mentioned, you can see it around the edge here. This one adds a nice contemporary feel to the table. It is ultra strong, high density, EPS foam tabletop core. That ensures durability and stability.
Now the edge banding, I want to zoom in and show you. You can see that edge banding on it. This will reinforce the table sides, and it seals any moisture out. Prevents the tabletop from peeling, cracking, or warping. And then again, you can see there's an up close of the maple grain on that.
Now I do want to show you the underside. The underside, right here you can see, they have three circles identified right here. And basically those are where the internal screw plates are. There's brackets under these circles on the inside of this tabletop. And it will assist with screw retention when you're attaching your table legs to it. If you're gonna attach one leg you'll put it right in the center here. If you're gonna attach two legs you'll put one on each outside circle. And what's nice is this circle, you just line your table leg with the circle, and that'll allow you to put the screws in and attach your leg to the tabletop. This part is made in the USA. A few dimensions on this, the length from this end to this end is 38 inches long. Width is 30 inches wide, and the thickness on this tabletop is right at one and a quarter inches. Weight of this part is about 20 pounds. But that should do it for the review on the Replacement etrailer 38 inch by 30 inch Maplewood RV Dinette Tabletop with the black trim..
The problem I have , was that the screws that hold table in place would strip out . Need to place reinforced plate at end.
Timely shipping. Product arrived as shown.
Would prefer to not get several automated emails trying to get me to order the same part again. not sure why it was doing that? Maybe it was a glitch in the system.
It is a great light weight table top. It does not have guidance circles to guide you on putting on the legs, but it looks nice and fits nicely into my RV.
Nice size, good fit. Easy install
The table top was the perfect size and looks great.
Very nice, just received it but haven’t installed it yet. Probably next day or two. Shipping was fast. Very solid.
Packed well for shipping. Good looking product. No trouble installing.
Nice table Great value and prompt service. Thanks etrailer.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.