Features to know about

Replace Damaged Awnings Fast: Roller and Fabric in One Assembly

This kit makes it simple to swap out a worn or damaged awning since the heavy-duty 13.5-oz vinyl fabric comes pre-installed on the black roller tube. You won’t have to struggle with feeding fabric into the roller or rail—just slide one end into the awning rail and attach the roller to your existing Solera support arms. It’s a complete roller and fabric assembly that saves time and hassle during installation.

Built for the Elements: Heavy-Duty 13.5-oz Vinyl Construction

The premium vinyl fabric is made for rugged outdoor use and is cold-crack tested down to -25°F, so it won’t stiffen or split in freezing weather. The seams are heat-welded to stop leaks and keep rain from seeping through. It’s the kind of durability that holds up season after season, protecting your setup from water, wind, and sun exposure.

Sleek Upgrade That Stands Out: Black Fade Fabric Finish

The Black Fade design starts dark at the RV side and transitions to white toward the edge for a sharp, modern look. The matching black roller tube ties it all together, giving your setup a clean appearance whether extended or rolled in.

Sized Right Every Time: Fits Solera XL 18' Power Awnings with 9'8" Projection

This assembly fits Solera XL 18' power awnings with a 9'8" projection. The fabric measures 17'1" (205") wide, and the roller tube is 18' wide. To get the correct size, measure from the center of your left awning arm to the center of your right arm—don’t base it on old fabric width since it will come up short.

Simple Setup for DIYers: Just Slide and Secure

Installing this kit is straightforward and frustration-free. The roller easily slides onto the head of each awning arm, and you’ll just need an awning rail (LC715217, sold separately) to connect it to your RV. Roll it in and out a couple of times to seat the fabric evenly, and you’re ready to relax in the shade instead of fighting with installation.