Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This ceiling vent makes it easy to control airflow right where you need it. The dampers rotate a full 360 degrees and open or close with a simple push of your finger, so you can direct warm or cool air exactly where it’s needed. Once adjusted, the vent stays in place to keep your space comfortable.
Swapping in this vent is quick and clean. It fits standard 4" duct openings on a wall or ceiling, and the bezel mounts securely with the included matching hardware. No searching for extra parts—just line it up, attach the screws, and it’s ready to use.
Made from durable white plastic, this vent blends in neatly with most interiors while standing up to everyday use. The low-profile design keeps it from sticking out or catching dust and pet hair, and the smooth finish wipes clean with ease.
With an overall diameter of 6-7/16" and a grille diameter of 3-13/16", this vent gives you solid airflow without taking up extra room. Its 4-9/16" mounting diameter and 5/16" depth make it a snug, professional-looking fit wherever it’s installed.
No special tool is required to adjust this vent. Just push one side or the other to open or close it. For ceiling spots that are hard to reach, a simple broom handle or similar rod works perfectly to adjust the airflow without climbing a ladder.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, welcome to etrailer.com I'm Bobby, and today we're taking a look at the Valterra rotating ceiling, heating and AC register. To go ahead and give you guys a little bit of control over your heating and AC needs. So whether you're updating your older model of ceiling register that you might have, or you're just putting in a brand new one, or you're just wanting to go ahead and give yourself a little bit more control, as you guys can actually turn this around and flip it up open or close. This can be a great way of just giving you that control you're looking for over your registers. Now the nice medium white finish too. It is gonna match most of our RV ceilings, which can be great.
Now keep in mind, we do have the six and a half diameter version here of course, so there are a couple of larger ones here at etrailer.com. Make sure you are measuring your vent to get yourself the right size. To begin replacing our broken one or maybe your outdated model. A lot of times all you really have to do is go ahead, start messing with the inside here, you can take out this middle element. A lot of times though, all you have to do is pull off this inner ring, that'll pop off your whole structure here.
And that's going to go ahead and expose our screws. So make sure you grab yourself a screwdriver or drill. And then we can start zipping these guys out. With your last bolt, make sure you're hold on the ring so you don't pop yourself in the face. With our new one in hands can be really easy to install, all we need to do is go ahead and grab our structure here.
It is going to come with four mounting screws as well. So you can go ahead and use these guys. And you could use the ones that you previously had installed, especially if you're liking that nice like finish you might have on the screw head. Now these guys aren't quite painted. Now you could always paint over them too to match it.
But they are nice and recessed here as you guys are seeing in our plastic mold here. They will fit quite nicely. So do keep that in mind. But we can leave that up to you guys. I'm simply going to go ahead and line up my screws here. And once I'm in place, I'm simply going to have my screwdriver and my screw is ready to go. We're gonna go ahead and threaden these on. Grabbing our drill and sink it into place. We don't have to go too crazy. We can just repeat this till they're nicely installed. With our last screw in place. We're installed. With it installed, we can see how it operates. To go ahead and open up our vents, all we have to do is simply push in to open them up. You can go ahead and just simply open it and close it to your needs of cutting off your airflow or opening it up. What's nice about this too, it can be rotated as well, which can be great. Maybe you're hanging on the couch a little cold and get that hot air pointed towards you. Or away if you're not quite wanting it on your face. Well, guys, I think Valterra ceiling registers is going to be a great way. Like we said to gain that control over your AC and heating needs. Really, really like how you go ahead and get this out of the way. That way if I'm walking through, I'm not having a blow right on me, but if I do want to go ahead and relax next to the couch after a cold night out, this can be a great way to go ahead and start warming up. Well guys, I think that about does it for our look at the Valterra rotating ceiling register for RVs and camper. Here at etrailer.com. I'm Bobby. Thanks for watching..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Gary W.
9/14/2020
GREAT
Marvin
6/10/2022
great
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/30/2025
I am glad you were able to track the vent down David! Thanks for mentioning your Rockwood, that will be helpful for other owners having a hard time finding the right fit. How is the Roo otherwise?