A cracked skylight can quickly turn into leaks and water damage if left unchecked. This white-tinted replacement fits 22" x 22" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.
Features:
Specs:
Get a waterproof install using the included sealant approved for use with polycarbonate plastic. Remove the old skylight, then clean and prep the roof surface so it's dry and debris-free. For added sealing, apply butyl tape (sold separately) along the skylight flange before setting it in place. Secure it with 1" zinc or stainless steel screws (not included), then seal over the flange edges and fasteners with the included sealant. If you need hardware or additional sealant, an install kit and extra sealant is available separately (SR76RR or SR86RR). If you'd like help installing your skylight, check out our Installer Locator to find an installer near you.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors, Steven here with etrailer.com. Folks, today we're looking at our Specialty Recreation Universal Replacement RV Skylight for a 22 x 22 inch. Now, folks, this does replace a damaged or worn skylight on your RV, camper, or enclosed trailer. Like I said, it fits a 22 x 22 inch cutout. Now this actual measurement on this guy, from side flange to side flange, is 25 1/2 x 25 1/2 square. Now it is made of a nice, durable polycarbonate.
It's UV resistant and impact resistant. You can see it can take a lot of pressure and just pop right back out where it needs to go. It's super tough, and you also get this included SR140 sealant. That's what you're gonna wanna use when you install this, along with your pre-drilled holes in the skylight. Now, there is no screws included.
You need one-inch screws as far as the length. You could get those separately here at etrailer.com or you can get 'em locally. It is made here in the US. I wanna make sure that you only use the SR140 sealant, as it works with polycarbonate. There are some self-leveling sealers out there.
A lot of people already have 'em from doing roof repairs or window repairs, and stuff on their RVs and campers. Do not use those with polycarbonate, as it could deteriorate the chemical make down and everything, it just doesn't mix. The approximate bubble height is about 4 1/2 inches deep, so the thickness there, if you will. Now that can vary because these are molded, you know, so you may have one that's got a little variance in it and stuff. There's nothing wrong with it.
Just kind of keep that 4 1/2 inch as a base measurement, if you will. So, again, you wanna have a 22 x 22 inch cutout for this. This is the Specialty Recreation Universal Replacement RV Skylight in white. I'm Steven, thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Worked great
Fortunately the skylight its self was not damaged. The packaging was ripped open and the skylight exposed. I would say the handlers were to rough but also more protection in the packaging would have helped.
The sealant tube blew apart during applications and made a mess of everything and ruined my $30 caulking gun.
Great fit looks good would buy again. T hanks
It’s what I ordered, got here when it was suppose to.
It's not as thick as OEM. That's not a huge deal. However, it's also not as tall. It appears to be between 1/4" and 1/2" shorter. It pressed down on the interior skylight bubble and had to bend over it. I was happy that by forcing it to bend that it didn't crack or break. It seems to be holding up okay, so I won't complain.
It's the same one I installed last fall. One end did not winter well I think because of the curve in the roof. Going to pad that well and be careful not to turn screws too tight. Rest of it was fine. Wood frame got dozed a bit from rough winter. Will reinforce with fiberglass and epoxy first
So far so good. Haven’t installed it yet but seems like it will do the trick. Got delivered super fast and was happy that it came with adhesive.
E trailer was the only place that included the sealant .E trailer was the only part supplier that stated why that sealer had to be used. Fast shipping super easy. I had to use a heat gun to remove old sealant. I saved and reused all the screws. I followed instructions on the sealant tube and didn’t over tighten them.
Perfect fit and fast shipping for a replacement RV skylight. I like it because it is thicker and darker than the OEM skylight. Easy install and it does come with sealant. I will buy again for my next skylight replacement.
Fit perfectly was a good quality product came with the adhesive to install it and good price.
It's only been a year, but I would say this has been a very nice, high quality skylight for my rv.
Well, I ordered the right size! The one I replaced had turned to a crispy cracker and desinigrated as I tried to remove it. The sealant that came with it was super sticky and worked well to lay a bead to seal it. I am confident I am back to a water-tight skylight. eTrailer is the best!
Easy install on aluminu Sundowner living quarter equine trailer. Fit perfect. Used 2 rows of 1/8x1” butyl tape then applied 3 tubes of sealant for lap seal. Order extra tubes because 1 tube will not gitter done.
I’m impressed with the quick delivery, the skylight and the ease of purchasing this item from etrailer. This is a replacement for a 17 year old RV, looks like it’s going to be the perfect fit. I will certainly look at etrailer for future purchases.
Item arrived, and was the right size. One major detractors was that all the drilled holes had melted plastic residue on the bottom, some greater than 1/8 inch thick. Had i not notice this right before I set the skylight on the adhesive, the skylight would have either leaked, or quite likely cracked when I went to screw it in. Had to trim and file each of those bumps smooth to get a good seal.
I replaced my factory clear skylight with this smoke skylight and it is a very nice replacement, no more sunlight in the front living area of our motorhome, it helped keep the area much cooler
Just what we were looking for
The Specialty Recreation skylight worked well.
it fit the hole in my roof though it was a bit bigger than the original one that came with the motorhome. I could not find one the exact same size. It is a replacement for one that we had above our shower in the restroom.
We are hoping that it lasts a good long time. Though it is very thin and did not want to stay flat against the roof even using all of the screws it still wants to pop up between the screws. The caulking that came with it is very difficult to use as it is very sticky (except when you want it to be) and when i tried to spread it with a small joint knife it leaves long strings of caulking that get everywhere. It is not self leveling like the Dicor that I use for everything else on the roof so it does not lay down flat, I have large bumps over each screw instead of a nice smooth surface. Trying to work the caulking is a nightmare. I did order the installation kit as well. This gave me the screws and an additional tube of the caulk, which i needed to finish the project.
Perfect fit, a solid skylight.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.