RV Bumper 2" Trailer Hitch Receiver - Clamp-On
(123 reviews)
Price: $45.00
In Stock
RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Item # S64025
Our Price: $45.00
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (123)
- Q & A (0)
- Photos
Swagman RV and Camper Hitch - S64025
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 4-1/2 x 4-1/2 Inch Bumper
- 4-1/4 x 4-1/4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- Swagman
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.
Features:
- 2" Hitch receiver opening to accommodate hitch accessories
- Solid steel construction
- Powder coated to resist corrosion
- For use with up to a 4-bike non-folding, standard bike rack
- Not to be used for towing or with cargo carriers
- For use above the bumper only
- Never exceed the bumper's stated capacities
- Attaches to bumper using 4" bolts (included)
Specs:
- Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers
- Not for use on aluminum or spot-welded bumpers
- Load capacity: 200 lbs
- Distance from the center of hitch pin hole to end of receiver: 3"
- Mounting plate measures 6" x 6"
Note: Not to be used with an adapter or extender.
64025 RV Bumper 2" Trailer Hitch Receiver - Clamp-On
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Missing parts
Customer Reviews
RV Bumper 2" Trailer Hitch Receiver - Clamp-On - S64025
Average Customer Rating: 4.8 out of 5 stars (123 Customer Reviews)
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.by: Clark C09/07/2022
Hold up well after 160 miles camping trip. Mounted at 4” rear bumper of my camping trailer to accomodate 2 bike rack. I only carry 1 bike for the trip. Solid and well secured using provision screw that you need to tightened once bike rack is mounted to avoid movement when driving.
by: George 02/12/2024
Very happy with the item. Well-made, and fits my RV bumper.
by: Jimbo09/01/2014
Very pleased with this product it's robust and solid, the bolts and lock nuts are high quality. Ordering and shipping were easy and fast. The part fit perfectly I used some gasket material to protect the bumper, would have liked to have the torque specs on the nuts. I use a Thule bicycle rack and this hitch allows me to bring along the bikes on my 5th wheel.
by: Lazy Creeks06/30/2018
Great vendor, great product.
We have 6 trailers at our home; 2 boat, 1 tandem utility, 3 single axle utility that need to be moved around frequently for space reasons.
Airports need to "push back" planes from their gates for which the "tugs" have hitches on their front bumpers. That arrangement allows greater steering control than if their hitches were mounted on the rear of the "tugs". So, I've mounted this wonderful hitch to the front bumper of my '86 Isuzu Trooper II 4-wheel drive which I use to position my trailers. Of course it's NOT safe for highway travel, but as a positioning aid, it is superb. Also; etrailer communications and speed of delivery cannot be improved. Don't change anything, etrailer.
by: Kevin 06/17/2020
I'm using this to mount a pretty large and heavy 4-bike rack to the rear bumper of my camper. This thing is stout. It has nylock nuts so I don't have to worry about the nuts backing off. Also has a threaded bolt hold in the side w/ bolt so that you can snug up whatever you put in the receiver (bike rack, etc.) to keep it from swaying. I really like that feature.
by: Michael J04/23/2014
Opened the box and was immediately impressed by the construction quality of this bike rack receiver. Easily installed on the bumper of our trailer and again, I was very impressed with the sturdy bolts, back plate and receiver. Too bad Swagman doesn't make one of these for my inferior spare tire holder.
Michael J.
4/23/2015
This is a great product, period! Perfect match for my 4 trailer bumper and my bike rack. But more importantly is the quality service I receive from etrailer. They are a great source for everything you could possibly need for your trailer or RV. Ive ordered several items from them and the quality is always 5 Star! Cannot say enough good things about their customer service. They are 5 Star from top to bottom. They set the standard for customer service and products.
by: John 06/09/2020
Luck was on your side for a nice piece of furniture for my trailer. The package arrived ok but when I went to open it -- I had no trouble. The shipping expert had forgotten to tape the box on the lid!!! Thankfully because the connector was tightly packed, it did not fall our and break someones foot or get lost and thrown in the trash.
John
6/11/2021
Like it is supppose to!
by: John M.08/05/2015
The RV Bumper Hitch Receiver is of great quality and is easily installed. I used it to mount to my trailer steel bumper so I can carry my bikes which mount on a receiver type rack.
John M.
8/16/2016
All three of these products have held up well and performed well. Thanks.
by: Patricia09/18/2018
Swagman hitch fits securely on our 4” trailer bumper. Our standard bike rack works fine on the hitch. I have had several campers ask me where I got the bumper hitch and have recommended etrailer for their solid customer service
by: Doug 09/22/2022
Works great on travel trailer tube bumper. As cheap to buy rather than making it
by: Jim S.03/17/2017
The Swagman RV Bumper 2" Trailer Hitch receiver is a very solid hitch receiver especially for the Swagman Dispatch 2 Bike Platform Rack - 2". Along with the threaded pin from the bike rack and the set bolt on this receiver there is no play or movement in the receiver tube. My bumper is 4" square and will require spacers on the back side to fully secure, minor issue.
by: Mark 09/08/2022
Had it for a year now it’s holding up perfectly, still looks like new. I use it for my bike rack and it works great.
by: Glenn03/12/2018
Etrailer service is always top notch with fast shipping. They are my go-to whenever I need parts or service items on my RV's trailers or truck.
About this hitch. Easy to install & does the job. Needed it to carry bikes on the back of our travel trailer. Due to ground clearance as you leave some gas stations, I would not mount it below the bumper you may drag the bikes on the ground. In fact they say not to bolt it underneath the bumper due to the limits of the bolt strength. So for what it is intended for, it's a great solution.
by: Mike07/06/2016
Purchased to fit on my RV bumper for bike rack/cargo carrier. Installation is as basic as you can get. I was surprised that the bolts were grade 8, but there were no washers. See no reason why it won't work very well.
by: Charles M05/18/2018
I ordered the Swagman RV hitch s64025. Upon receiving the hitch early Wednesday afternoon, I opened the box and noticed that the bottom plate was missing. I immediately called etrailer and spoke with Crystal. She was sympathetic and totally understanding of my situation. She immediately placed an order for a replacement. I received the replacement hitch early Friday afternoon. I'm just waiting for instructions to return the old hitch. The original box may have been opened somewhere during shipment--I can't be sure. However, I would not hesitate ordering anything from etrailer. I ordered other items as well and they all arrived on-time and in good condition. A big Thank you Crystal, and I would be remiss if I didn't thank Reesa, and Tiffany for their help in placing other orders. This is what I call a Five-Star customer oriented company--nothing short of OUTSTANDING!!!
by: Tom A.10/11/2014
I installed this item to mount the Prorack 2 bike rack on the bumper of our new trailer so that we could conveniently carry 2 lounge chairs. It was nicely fabricated and finished, and installed easily with the hardware included. I'd have given it an "excellent" rating, but I'm not sure that there won't be some future corrosion issues with the bolts provided due to the type of surface treatment. However - with this stated - I'd definitely consider purchasing this item again to meet a similar need in the future.
by: Jay W.12/06/2017
RV Bumper Hitch attachment: Works perfect! I use two, one on each end of the bumper to attach flag pole holders. Have already had comments about the product and the professionalism of the staff and the quick mailing was impressive!
Installation was simply bolting the product onto the bumper, how easy is that!!??
No more use of U-Bolts and or having to weld pipe onto the RV in order to flag my NASCAR flags at the track(s).
Do not be doubtful of this product!! Get yourself one or two!! Thanks etrailer!!
by: Andrew 09/03/2020
Good product, reasonable price, easy to find on etrailer. Just what was needed to add a bike rack on the rear bumper of our travel trailer. Just as advertised, works fine, seems strong enough - though time will tell. Arrived in good time, as predicted.
by: Don S.03/06/2017
This clamp on hitch receiver arrived in only a couple of days although I live in Southern Ontario Canada. The finish and welding on this product are excellent. I will use it for attaching a bike rack to the rear bumper of our new travel trailer. I purchased the bike rack some months ago from etrailer. That was also very good customer service experience.
by: Dave 05/14/2020
Just right to add a bike rack, not load rated to add a trailer.
Would prefer locking nuts, but easy to find at hardware store.
by: Gareth M02/21/2017
This hitch was the perfect way to mount my bicycle rack to the rear of my trailer. We have used it several times in the last year with no problems. It was easy to install.
by: Fred B.06/20/2016
Perfect for my new RV. I like the all black finish, bolts included, that goes well with the black bumper. It will be used for a two bike carrier and looks to be rugged enough, I'm sure it is, and time will tell. I think it will be great.
by: Elwood07/25/2015
Received the product and installed it today - easy installation. I have another hitch receiver that I bought years ago, but it's at our home in Florida and we're currently in Ohio. This one is much better quality, but also cost over twice as much. While we won't be leaving to head home for a month, I foresee no issues with this receiver handling the bike rack and two bikes.
by: Jeremy06/01/2020
Been using this for a year on our camper bumper for bike rack. So far so good!
by: John P06/02/2016
This is a great product; perfect for the bumper of our trailer. Now I can carry the bikes.
eTrailer is a great outfit to do business with: fast shipping and good customer care.
25
123
Show More Reviews
See what our Experts say about this Swagman RV and Camper Hitch
- Trailer Hitch and Wiring for a 2007 Subaru Impreza HatchbackThe trailer hitches that are available for your 2007 Subaru Impreza all top out at 200 pounds tongue weight so you would need a different way to carry the motorcycle. Basically, using the Impreza the motorcycle would have to be on a trailer. This is actually much safer and easier on the vehicle than a hitch mounted carrier. If your Impreza is a WRX but not an STi model then you can use Curt trailer hitch # C11497. The proper ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for...
view full answer... - Recommendation for a Trailer Hitch that Mounts to a Bumper Pull HitchIt sounds like you are describing a bumper hitch with a ball. What you can do is remove the ball and install Curt Bumper Hitch, # E-3S. This will provide a 2 inch trailer hitch receiver that you can use with a hitch mounted bike rack. I have included a link to the installation details for the hitch. If you have an RV or trailer that has a 4 inch square channel bumper, you could use RV Bumper Trailer Hitch Receiver, # E-100. Or, if it is a 4 inch square continuous welded steel bumper, you...
view full answer... - Bike Rack Recommendation for Attaching to Longer Ball MountThe # S64025 is not ideal to mount on top of a ball mount as it would be so close to the top of the shank and it was not intended for this application as well. The distance between the bolts is 4 inches too which would be too wide for a 2 inch wide ball mount. A better solution might be a longer ball mount like the part # BM20 and a bike rack designed to attach directly to the ball mount like the Swagman Traveler XCS part # S64664. I attached a picture of what this would look like and...
view full answer...
- Recommended Bumper Mount Receiver for Travel TrailerAs long as the bumper is not aluminum, and the seams on the bumper are continuously (not spot) welded, a bumper hitch like those you mentioned can be used. You will also need to ensure that the bumper is rated to handle the weight of the bikes plus the rack. Of the three, I would recommend the Curt # E-100 because of its higher capacity and tougher construction. You do not mention which bike rack you are planning on using. You will want to be sure to use a bike rack that is approved...
view full answer... - Comparing Swagman RV Platform Bike Carrier # S64663 and XTC-2 2-Bike Platform Rack # S64670You are correct that Swagman Platform-Style 2 Bike Rack # S64663 does include both an RV-rated 2-bike rack as well as a bumper-mount RV hitch receiver that installs on a continuously welded 4- to 4-1/2-inch tall steel RV bumper. Part # S64025 is just the RV hitch itself. Swagman XTC-2 2-Bike Platform Rack # S64670 does fit both 1-1/4-inch and 2-inch hitches however this rack is NOT rated for use on the back of a trailer. Swagman offers their Dispatch 2 Bike Platform Rack # S44FR that...
view full answer... - Travel Trailer Hitch RecommendationsOnly certain bike racks are rated for use behind an RV/trailer. The reason is for that is because they have a much rougher ride present there when compared to a vehicle. You would need to contact Allen with the model of your bike rack to determine if it would be rated for use on a trailer. That we are aware of none of their racks are rated for this. I attached a link to a page that has all of the RV bike racks we offer. For a bumper mounted hitch for your 4 inch bumper I would recommend...
view full answer... - Availability of RV Bumper Trailer Hitch Receiver and Bike RackAny of our RV and motor home bike racks, see link, with a 2 inch shank will work with the RV Bumper 2 inch Trailer Hitch Receiver with Anti-Rattle - Clamp-On, part # S64025. Please be aware that the springs on a camper are very different than those on a vehicle, and the bikes will be jarred quite a bit. No matter which bike rack you choose, you will need to be sure to secure the bikes with bungees to prevent damage to the bikes, rack, or your camper.
view full answer... - Do You Carry a Swagan Clamp-On or Bolt-On RV/Camper Bumper HitchYes, the RV Clamp-On Bumper Hitch is available by itself. It is part # S64025 and I have added a link to it below. Remember, your bumper needs to be a 4x4 inch continuous-weld steel bumper. It cannot be used on spot welded or aluminum camper bumpers.
view full answer... - Hitch Recommendation for Trailer Frame for Dish Tailgator InstallSince none of our bolt on hitches are designed to fit a bumper, (or in your case a frame), that is 5 inch by 2 inch the best recommendation I could give you would be a Hitch Receiver part # E-9 that you could weld to the frame of your trailer.
view full answer...
- Bumper Mounted Hitch That Will Work With Roadmaster Hitch Mounted Spare Tire CarrierThere is a hitch that will work for you, but the Bumper Hitch Receiver # S64025 that you referenced is for use with bike racks and would not be a fit for your new Roadmaster Spare Tire Mount RM-195225. Instead, I recommend the Ultra-Fab # UF35-946402 which is a 2" trailer hitch receiver that clamps onto 4" x 4" square bumpers and has a maximum tongue weight of 350 lbs, which should be well within the range of the Spare Tire Mount and spare tire. I've added links to a pair of video reviews...
view full answer... - Bumper Mounted Hitch Recommendation for RV to Carry a 75 lb Spare TireThe Swagman Specialty Trailer Hitch # S64025 that you referenced has a 200 lb capacity so it would be strong enough to handle the weight of your spare tire, but it is designed only for use with bike racks so although it would seem to work for you, I cannot recommend it for you. For a similar hitch that would work for what you are trying to do you would want the part # UF35-946402 . For a spare tire carrier you would then want the # C31006 as it would also have a high enough capacity for...
view full answer... - Swagman Platform Bike Rack Recommendation for Use Behind an RVThe Swagman XTC2 Bike Rack part # S64670 is a great rack, the only problem is that it is not designed to work at the back of an RV or trailer. The ride quality at the back of an RV is much rougher than the back of a passenger vehicle. Because of this only certain racks have been designed to work there. For a similar rack that would work at the back of an RV (and actually this comes with the # S64025) you would want the Swagman Platform-Style 2 Bike Rack # S64663. This rack has been confirmed...
view full answer... - Recommended Hitch For Back Of Fifth Wheel Trailer For Bike RackIf you are looking for a hitch that will fit your fifth wheel trailer we offer a couple of different style hitches that may work for you. If you are looking for a hitch that attaches to the trailer frame I recommend part # 13703. This will adjust to fit trailer frames from 22 to 72 inches wide. This hitch can be bolted or welded to the frame. If you prefer a bumper mounted hitch I recommend the Swagman RV Bumper Hitch Receiver, part # S64025. This hitch is designed for 4 X 4 continuous...
view full answer... - Using the Swagman 2 inch RV Bumper Trailer Hitch for a Scooter Carrier.In order to use a scooter carrier with the 4-inch bumper hitch, part # S64025, the entire load would need to be less than 200 pounds, including the weight of the carrier and scooter.
view full answer... - Carrying Bikes on Travel Trailer Using Swagman Universal RV Bumper HitchIf your trailer has a continuously welded steel square bumper of up to 4 inches wide then this hitch can be mounted to it as long as your bumper is rated for a hitch. For carrying bikes you will have to consult your RV dealer to find out the tongue weight rating for your trailers bumper. The Swagman RV Bumper Hitch you referred to is rated for up to 200 pounds but you can not exceed the weight rating for your bumper. Many of the bike racks state that they are not to be used behind travel...
view full answer... - Recommended Travel Trailer Hitch Receiver and Cargo Carrier for Gas GeneratorOn your Dutchmen Coleman Lantern 17rd travel trailer, I recommend the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which has a weight capacity of 350 lbs maximum tongue weight. Then for a 4,000 watt running generator like the Q-iPower # 289-AP5000 which weighs 117 lbs and has dimensions of 23-1/4" long x 17" wide x 18-1/2" tall, you will want a cargo carrier like the TorkLift Lock and Load # TLA7752. This will not only help carry the generator but also deter theft. If you want...
view full answer... - Trailer Hitch that Mounts to the Frame of a 5th Wheel TrailerYou can put an RV trailer hitch on a 5th wheel trailer. For a frame mounted hitch the most versatile is the Curt hitch # 13703. This hitch fits frame frames from 22 to 72 inches wide (frame width is measured from the outside of one frame rail to the outside of the other frame rail). It can be used on box frames, I-Beam frames, and C-Channel frames. And it can be bolted or welded on. Welding should be performed by a professional welder. I have included a link to the installation instructions...
view full answer... - RV-Rated 2-Bike Rack for 2015 Lance 1685 Travel TrailerWe do offer a range of RV-rated bike racks that can transport your 2 bikes on the back of your Lance travel trailer. The linked page will show you all types, which include hitch-mount, bumper-mount and ladder-mount types. The Lance website does not provide specs for the bumper on their 1685 so you'll want to contact them with your trailer's VIN to confirm the bumper is continuously-welded steel and strong enough to handle the weight of a loaded bike rack. Based on the photos on their...
view full answer... - Compatibility of the Swagman RV Bumper 2 Inch Trailer Hitch Receiver Used to Carry A 150 GeneratorThe Swagman RV Bumper 2 Inch Trailer Hitch Receiver, # S64025, has a 200 lbs weight capacity and will mount to a 4 x 4 inch square bumper. However, you will needed to know the tongue weight capacity of your trailer's bumper before mounting the Swagman hitch and a generator. Typically, this style of bumper receiver hitch is used for lightweight hitch accessories like a bike rack or a point to mount a spare tire. Consult the trailer's owner's manual or contact the manufacturer to find...
view full answer... - What Bike Rack Would be Best for a Pop-Up Camper or Collapsible TrailerSwagman has built several bike rack solutions specifically for the rear of Fifth Wheels, campers and trailers. Often times there is much more rear bumper bounce on a trailer or pop-up camper when compared to a passenger vehicle, so Swagman designed some bike racks to withstand the rougher ride. If the camper has a solid steel square tube bumper, you could use something like the Swagman Bumper Hitch, part # S64025 in conjunction with a towing bike rack like part # S64400. Swagman also...
view full answer... - Why Wont the Hollywood Racks Sport Rider Bike Racks Work On a 5th Wheel TrailerThe Hollywood Racks Sport Rider Bike Racks are indeed not rated for use on a fifth wheel trailer as is the case with many bike racks due to the decreased ride quality at the back of the trailer. Instead, you'll need to use the Hollywood Racks RV Rider Bike Platform Rack part # HLY64FR which is built much stronger. In regards to a bumper hitch, most are either for a 4" x 4" or 4-1/2" x 4-1/2" as these are the standard sizes. That said, the RV Bumper 2" Trailer Hitch Receiver part # S64025...
view full answer... - Trailer Hitch Recommendation for RV Bumper for Carrying Bike RackYes, we have the RV Bumper hitch from Swagman part # S64025 which is designed to fit 4 inch by 4 inch square RV bumpers and carry an RV approved bike rack like the Swagman E-Spec # S94FR which would work well.
view full answer... - Recommendation for a Bike Rack on a Cougar 302 Trailer with Slide Out Storage BumperYou will have to contact the manufacturer of your travel trailer to see if it is rated for weight carrying capacity. I would ask if it can carry a 3-4 bike rack either extended or retracted since there is likely less capacity when extended than when retracted. If the bumper is 4 to 4-1/2 inch continuous welded square steel construction and the manufacturer allows the addition of a bike rack to the bumper then you could use the Swagman 4 Bike Carrier RV Mounted Bike Rack, item # S80600...
view full answer... - Bumper Mounted Hitch For 2011 Gulfstream VisaThe Swagman RV Bumper 2 inch Trailer Hitch Receiver is intended to fit bumpers that measure 4 inches by 4 inches, and would not fit the bumper of your motorhome. The closest we come to the 4 inches by 1-1/2 inches you said is the size of your bumper is part # C19101. It is intended to fit bumpers that measure 2 inches by 4 inches. This would still give you a 1/2 inch gap if installed on your RV. I cannot recommend a bumper hitch, but can recommend a frame mounted receiver for your RV. I...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Zach D
Video Edited:
Jonathan Y
Updated by:
Adele M
Updated by:
Matthew S
Updated by:
Jenny M
Installed by:
Cole B
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kevin
6/18/2021
The receiver itself is great. I still have it on my camper. My campers bumper on the other hand was not up to the task of stress that a fully loaded 4-bike rack put on it. The bumper could probably handle 1 or 2 bikes just fine but the rack I have puts too large of a moment on the thin wall square tube bumper.